Laboratory Evaluation of Utilizing Waste Heavy Clay and Foundry Sand Blends as Construction Materials
Publication: Journal of Materials in Civil Engineering
Volume 26, Issue 9
Abstract
This paper presents a study in which the feasibility of utilizing two industrial wastes, a heavy clay material from the automotive industry and a waste foundry sand from the metallurgical industry, as construction materials was evaluated through laboratory experiments. The laboratory study blended two industrial wastes at different proportions and stabilized the blend with varying amounts of cement. The engineering properties of the blends were evaluated through the Atterberg limits, Proctor compaction test, direct shear, and unconfined compressive strength tests. The results from this study indicate that blending foundry sand into waste heavy clay significantly reduced its plasticity and cohesion and hence made it possible to be further stabilized with cement. In addition, it is observed that the blended materials had other improved properties such as increased maximum dry unit weight, friction angle, and compressive strength. However, the increase in compaction and strength properties became less significant with the increase of foundry sand content. An optimum blending ratio was recommended through this laboratory study.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors would like to express their thanks to the Open Fund of Key Laboratory of Road Structure and Material of Ministry of Transport (Changsha University of Science & Technology) for their support on the project.
References
AASHTO. (1991). “Standard specifications for classification of soils and soil-aggregate mixtures for highway construction purposes.”, American Association of State Highway and Transportation Officials, Washington, DC.
Abichou, T., Edil, T. B., Benson, C. H., and Tawfiq, K. (2005). “Hydraulic conductivity of foundry sands and their use as hydraulic barriers.” Recycled Materials in Geotechnics, 186–200.
Ashmawy, A., McDonald, R., Carreon, D., and Atalay, F. (2006). “Stabilization of marginal soils using recycled materials.” Rep. No. BD-544-4, Florida Dept. of Transportation, Transportation Reserach Board, Washingtion, DC.
ASTM. (2000). “Standard test methods for liquid limit, plastic limit and plasticity index of soils.”, ASTM International, West Conshohocken, PA.
ASTM. (2007). “Standard test methods for liquid limit, plastic limit and plasticity index of soils.”, ASTM International, West Conshohocken, PA.
ASTM. (2010). “Standard Test Methods for Liquid Limit, Plastic Limit and Plasticity Index of Soils.”, ASTM International, West Conshohocken, PA.
ASTM. (2011). “Standard test methods for liquid limit, plastic limit and plasticity index of soils.”, ASTM International, West Conshohocken, PA.
ASTM. (2012). “Standard test methods for liquid limit, plastic limit and plasticity index of soils.”, ASTM International, West Conshohocken, PA.
Attom, M. F., and Al-Sharif, M. M. (1998). “Soil stabilization with burned olive waste.” Appl. Clay Sci., 13(3), 219–230.
Basha, E. A., Hashim, R., Mahmud, H. B., and Muntohar, A. S. (2005). “Stabilization of residual soil with rice husk ash and cement.” Constr. Build. Mater., 19(6), 448–453.
Bhat, S. T., and Lovell, C. (1997). “Flowable fill using waste foundry sand: A substitute for compacted or stabilized soil.” Testing soil mixed with waste or recycled materials, ASTM STP, Vol. 1275, 26–41.
Chakrabarti, S., and Kodikara, J. (2005). “Stabilization of crushed basaltic rocks and clay mixtures using cementitious additives.” J. Mater. Civ. Eng., 432–439.
Chen, L., and Lin, D. F. (2009). “Stabilization treatment of soft subgrade soil by sewage sludge ash and cement.” J. Hazard. Mater., 162(1), 321–327.
Deer, W., Howie, R., and Zussman, J. (1992). An introduction to the rock-forming minerals, Longman Group, New York, 696.
Degirmenci, N., Okucu, A., and Turabi, A. (2007). “Application of phosphogypsum in soil stabilization.” Build. Environ., 42(9), 3393–3398.
Deng, A., and Tikalsky, P. J. (2008). “Geotechnical and leaching properties of flowable fill incorporating waste foundry sand.” Waste Manage., 28(11), 2161–2170.
Foundry Industry Recycling Starts Today (FIRST). (2004). “Foundry sand facts for civil engineers.”, Federal Highway Administration, Washington, DC.
Guney, Y., Aydilek, A. H., and Demirkan, M. M. (2006). “Geoenvironmental behavior of foundry sand amended mixtures for highway subbases.” Waste Manage., 26(9), 932–945.
Inyang, H. I. (2003). “Framework for recycling of wastes in construction.” J. Environ. Eng., 887–898.
Kamon, M., and Nontananandh, S. (1991). “Combining industrial-wastes with lime for soil stabilization.” J. Geotech. Eng., 1–17.
Maclean, D., Robinson, P., and Webb, S. (1990). “An investigation of the stabilization of a heavy clay soil with cement for road base construction.” Roads Road Constr., 30(358), 287–292.
Mgangira, M. (2006). “Laboratory assessment of the influence of the proportion of waste foundry sand on the geotechnical engineering properties of clayey soils.” J. South African Institut. Civ. Eng., 48(1), 2–7.
Prusinski, J. R., and Bhattacharja, S. (1999). “Effectiveness of portland cement and lime in stabilizing clay soils.” Transportation Research Record 1652, Transportation Research Board, Washington, DC, 215–227.
Saltan, M., Kavlak, Y., and Ertem, F. S. (2011). “Utilization of pumice waste for clayey subgrade of pavements.” J. Mater. Civ. Eng., 1616–1623.
Vanatta, B. (2000). Guide for industrial waste management, Diane Publishing, Darby, PA.
Zhang, Z. J., and Tao, M. J. (2008). “Durability of cement stabilized low plasticity soils.” J. Geotech. Geoenviron. Eng., 203–213.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Jul 21, 2013
Accepted: Oct 24, 2013
Published online: Oct 26, 2013
Published in print: Sep 1, 2014
Discussion open until: Oct 19, 2014
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.