Micromechanics-Based Optimization of Pigmentable Strain-Hardening Cementitious Composites
Publication: Journal of Materials in Civil Engineering
Volume 26, Issue 7
Abstract
Architectural and decorative concrete (ADC) has become an enormously popular product for both building interiors and exteriors, combining an aesthetic finish with structural capabilities. Cracking and chipping of ADC product during handling and transportation, however, is of great concern due to the brittleness of ADC materials. This paper looks at the development of a white strain-hardening cementitious composite (SHCC) as an alternative ADC material to address the above-mentioned challenges. It was found that the replacement of ordinary portland cement and fly ash with white cement altered SHCC microstructure which is unfavorab to the tensile strain-hardening behavior. A micromechanical model was engaged for composite optimization through ingredients selection and component tailoring to reengineer white SHCCs.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
Support of this research by Metamorphix Global Inc. was gratefully acknowledged.
References
Cassar, L., Pepe, C., Tognon, G., Guerrini, G. L., and Amadelli, R. (2003). “White cement for architectural concrete, possessing photocatalytic properties.” 11th Int. Congress on the Chemistry of Cement, Durban, South Africa.
Kanda, T. (1998). “Design of engineered cementitious composites for ductile seismic resistant elements.” Ph.D. thesis, Univ. of Michigan, Ann Arbor, MI.
Li, V. C. (1992). “Post-crack scaling relations for fiber-reinforced cementitious composites.” J. Mater. Civ. Eng., 41–57.
Li, V. C., and Leung, C. K. Y. (1992). “Theory of steady state and multiple cracking of random discontinuous fiber reinforced brittle matrix composites.” J. Eng. Mech., 2246–2264.
Li, V. C., Wu, C., Wang, S., Ogawa, A., and Saito, T. (2002). “Interface tailoring for strain-hardening PVA-ECC.” ACI Mater. J., 99(5), 463–472.
Li, Y., and Tian, B. (2010). “Discussion on application of decorative concrete in modern architecture.” 2010 Int. Conf. on Mechanic Automation and Control Engineering, Institute of Electrical and Electronics Engineers (IEEE), Wuhan, China.
Lin, Z., Kanda, T., and Li, V. C. (1999). “On interface property characterization and performance of fiber-reinforced cementitious composites.” J. Concr. Sci. Eng., 1, 173–184.
Marshall, D. B., and Cox, B. N. (1988). “A J-Integral method for calculating steady-state matrix cracking stresses in composites.” Mech. Mater., 7(2), 127–133.
Mindess, S., Young, J. F., and Darwin, D. (2002). Concrete, 2nd Ed., Prentice Hall, Pearson Education, Upper Saddle River, NJ.
Redon, C., Li, V. C., Wu, C., Hoshiro, H., Saito, T., and Ogawa, A. (2001). “Measuring and modifying interface properties of PVA fibers in ECC matrix.” J. Mater. Civ. Eng., 399–406.
Yang, E. H., and Li, V. C. (2007). “Numerical study on steady-state cracking of composites.” Compos. Sci. Tech., 67(2), 151–156.
Yang, E. H., and Li, V. C. (2010). “Strain-hardening fiber cement optimization and component tailoring by means of a micromechanical model.” Constr. Build. Mater., 24(2), 130–139.
Yang, E. H., Yang, Y. Z., and Li, V. C. (2007). “Use of high volumes of fly ash to improve ECC mechanical properties and material greenness.” ACI Mater. J., 104(6), 620–628.
Information & Authors
Information
Published In
Journal of Materials in Civil Engineering
Volume 26 • Issue 7 • July 2014
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Apr 10, 2013
Accepted: Jul 31, 2013
Published online: Aug 3, 2013
Published in print: Jul 1, 2014
Discussion open until: Aug 20, 2014
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.