Fractal and Multifractal Characteristics of 3D Asphalt Pavement Macrotexture
Publication: Journal of Materials in Civil Engineering
Volume 26, Issue 8
Abstract
Pavement macrotexture is a major factor that influences surface functions. This work characterizes the fractal and multifractal properties of asphalt pavement macrotexture using three-dimensional (3D) measurements. A handheld 3D laser scanner is introduced to scan pavement macrotexture in situ. It is verified that the 3D scanning method has good repeatability. Field tests are conducted at 37 highway and urban road sections, which include six types of asphalt pavement surfaces, dense asphalt concrete (DAC), stone matrix asphalt (SMA), rubber asphalt concrete (RAC), ultrathin wearing course (UTWC), microsurfacing (MS), and open graded friction course (OGFC). Three indicators are selected to capture the fractal and multifractal properties of pavement macrotexture: (1) fractal dimension (); (2) the differences between the two endpoints of multifractal spectrum in horizontal; and (3) vertical directions [ and ]. These indicators can quantify the general irregularity, the steepness difference between the flattest parts and the steepest parts, and the difference in total area between the flattest parts and the steepest parts of pavement macrotexture, respectively. The correlation coefficients between , , and the mean texture depth (MTD) are 0.8423, 0.7620, and 0.8732, respectively. The correlation coefficient between and friction coefficient at the speed of (DFT60) is 0.6996. It is 0.6639 when relating and DFT60. However, when relating MTD to DFT60, it is only 0.4483. It is shown that and derived from 3D measurement have some advantages over MTD in skid resistance evaluation. The fractal and multifractal indicators enriched the options for macrotexture evaluation.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The research reported in this paper is funded by the National Natural Science Foundation of China (No. 50908004 and No. 51178013).
References
AASHTO. (2008). Guide for pavement friction, AASHTO, Washington, DC.
Abbas, A., Kutay, M. E., Azari, H., and Rasmussen, R. (2007). “Three-dimensional surface texture characterization of Portland cement concrete pavements.” Comp. Aid. Civ. Infrastruct. Eng., 22(3), 197–209.
ASTM. “Standard test method for measuring pavement macrotexture depth using a volumetric technique.” E965, West Conshohocken, PA.
ASTM. “Standard test method for measuring paved surface frictional properties using the dynamic friction tester.” E1911, West Conshohocken, PA.
Bitelli, G., Simone, A., Girardi, F., and Lantieri, C. (2012). “Laser scanning on road pavements: A new approach for characterizing surface texture.” Sensors, 12(7), 9110–9128.
Cackler, E. T., Ferragut, T., and Harrington, D. S. (2006). “Evaluation of U.S. and European concrete pavement noise reduction methods.” National Concrete Pavement Technology Center, Iowa State Univ., Ames, IA.
Cao, P. (2009). “Study on effects of texture and contaminants to skid resistance of asphalt pavements.” Ph.D. thesis, Wuhan Univ. of Technology, Wuhan, China.
Chhabra, A., and Jensen, R. V. (1989). “Direct determination of the singularity spectrum.” Phys. Rev. Lett., 62(12), 1327–1330.
Ech, M., Yotte, S., Morel, S., Breysse, D., and Pouteau, B. (2007). “Laboratory evaluation of pavement macrotexture durability.” Revue Européenne de Génie Civil, 11(5), 643–662.
Falconer, K. (2003). Fractal geometry: Mathematical foundations and application, Wiley, New York.
Gendy, A. E., and Shalaby, A. (2007). “Mean profile depth of pavement surface macrotexture using photometric stereo techniques.” J. Transp. Eng., 433–440.
Gendy, A. E., Shalaby, A., Saleh, M., and Flintsch, G. W. (2011). “Stereo-vision applications to reconstruct the 3D texture of pavement surface.” Int. J. Pavement Eng., 12(3), 263–273.
Geomagic Studio [Computer software]. Morrisville, NC, Geomagic, Inc.
Gunaratne, M., Bandara, N., Medzorian, J., Chawla, M., and Ulrich, P. (2000). “Correlation of tire wear and friction to texture of concrete pavements.” J. Mater. Civ. Eng., 46–54.
Henry, J. J. (1978). “The relationship between texture and pavement friction.” Tire Sci. Technol., 6(4), 215–232.
Henry, J. J. (2000). “Evaluation of pavement friction of characteristics.” Transportation research record, NCHRP synthesis 291, Transportation Research Board, National Research Council, Washington, DC.
Kokkalis, A. G., and Panagouli, O. K. (1998a). “Fractal evaluation of pavement skid resistance variations. I: Surface wetting.” Chaos, Solitons Fractals, 9(11), 1875–1890.
Kokkalis, A. G., and Panagouli, O. K. (1998b). “Fractal evaluation of pavement skid resistance variations. II: Surface wear.” Chaos, Solitons Fractals, 9(11), 1891–1899.
Kwaśny, W. (2009). “A modification of the method for determination of surface fractal dimension and multifractal analysis.” J. Achiev. Mater. Manufact. Eng., 33(2), 115–125.
Laurent, J., Hébert, J. F., Lefebvre, D., and Savard, Y. (2012). “Using 3D laser profiling sensors for the automated measurement of road surface conditions.” 7th RILEM Int. Conf. on Cracking in Pavements.
Lopesa, R., and Betrouni, N. (2009). “Fractal and multifractal analysis: A review.” Med. Image Anal., 13(4), 634–649.
Mandelbrot, B. B. (1983). The fractal geometry of nature, W. H. Freeman and Company, New York.
Miao, Y., Cao, D., and Liu, Q. (2011). “Relationship between surface macrotexture and skid resistance of asphalt pavement.” J. Beijing Univ. Technol., 37(04), 547–553.
Ongel, A., and Harvey, J. (2010). “Pavement characteristics affecting the frequency content of tire/pavement noise.” Noise Control Eng. J., 58(6), 563–571.
Panagouli, O. K., and Kokkalis, A. G. (1998). “Skid resistance and fractal structure of pavement surface.” Chaos, Solitons Fractals, 9(3), 493–505.
Perez-Jimenez, F., Martinez, A., Sanchez-Dominguez, F., and Ramos-Garcia, J. A. (2011). “System for measuring splash on wet pavements.” Transportation Research Record 2227, Transportation Research Board, Washington, DC, 171–179.
Permanent International Association of Road Congresses (PIARC). (1987). “Technical committee Rep. No. 1: Surface characteristics.” XVIII World Road Congress, World Road Association (PIARC), La Defense Cedex, France.
Raja, V., and Fernandes, K. J. (2008). Reverse engineering: An industrial perspective, Springer, London.
Sengoz, B., Topal, A., and Tanyel, S. (2012). “Comparison of pavement surface texture determination by sand patch test and 3D laser scanning.” Periodica Polytechnica: Civ. Eng., 56(1), 73–78.
Vallejo, L. E. (2001). “Fractal assessment of the surface texture of pavements.” Int. J. Pav. Eng., 2(2), 149–156.
Vilaca, J. L., Fonseca, J. C., Pinho, A. M., and Freitas, E. (2009). “A new machine for acquire pavement texture.” IEEE 7th Int. Conf. on Computational Cybernetics, IEEE Computer Society.
Wambold, J. C., Antle, C. E., Henry, J. J., and Rado, Z. (1995). “International PIARC experiment to compare and harmonize texture and skid resistance measurements.” Permanent International Association of Road Congresses, Paris.
Wang, K. C. P., and Li, L. (2012). “Pavement surface texture modeling using 1 mm 3D laser images.” Transportation Systems Workshop 2012, Austin, TX.
Wen, J. (2009). “Study on evaluating texture depth of asphalt pavement with digital technology.” Master thesis, Chang’an Univ., Xi’an, China.
Xie, H., Wang, J., and Kwaœniewski, M. A. (1999). “Multifractal characterization of rock fracture surfaces.” Int. J. Rock Mech. Min. Sci., 36(1), 19–27.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Dec 2, 2012
Accepted: Jul 31, 2013
Published online: Apr 23, 2014
Published in print: Aug 1, 2014
Discussion open until: Sep 23, 2014
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.