Appropriate Wood Constitutive Law for Simulation of Nonlinear Behavior of Timber Joints
Publication: Journal of Materials in Civil Engineering
Volume 26, Issue 6
Abstract
In structural analysis, because of its anisotropic behavior, wood requires an appropriate constitutive law covering different behavior modes, such as ductile compressive behavior and brittle character in shear and tension. In this study, nonlinear material models were proposed to describe the behavior of timber in a finite-element method (FEM) model. An anisotropic elastoplastic constitutive law with hardening according to Hill yield criterion was used to describe the compressive behavior. Brittle behavior in tension and shear were modeled by using the progressive failure analysis approach, which is based on a failure criterion representing the evolution of damage in timber by a reduction of the elastic modulus. The wood material model was implemented in a three-dimensional FEM model to simulate the nonlinear behavior of timber joints with various types of loadings. The numerical model reliably predicted the stiffness and failure load of the joints. Furthermore, the failure index provided by the numerical model was used to evaluate the potential brittle failure position. Moreover, the initiation of damage and growth in timber members was modeled by using the element removal controlled by stress checking on the basis of the failure criterion. Good agreement was observed between numerical simulations and experimental measurements of failure modes.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors gratefully acknowledge the support of “National Natural Science Foundation of China (Grant No. 51108055),” “Creative Research Groups of the National Natural Science Foundation of China (Grant No. 51121005),” and “Chinese-French cooperation Program Cai Yuanpei 2012—27938UM”.
References
Audebert, M., Dhima, D., Taazount, M., and Bouchaïr, A. (2011). “Numerical investigations on the thermo-mechanical behavior of steel-to-timber joints exposed to fire.” Eng. Struct., 33(12), 3257–3268.
Ballerini, M., and Rizzi, M. (2007). “Numerical analyses for the prediction of the splitting strength of beams loaded perpendicular-to-grain by dowel-type connections.” Mater. Struct., 40(1), 139–149.
Bouchaïr, A., and Vergne, A. (1995). “An application of the Tsaï criterion as a plastic flow law for timber bolted joint modelling.” Wood Sci. Technol., 30(1), 3–19.
Clouston, P., Lam, F., and Barrett, J. D. (1998). “Incorporating size effects in the Tsai-Wu strength theory for Douglas-fir laminated veneer.” Wood Sci. Technol., 32(3), 215–226.
Coureau, J. L., Gustafsson, P. J., and Persson, K. (2006). “Elastic layer model for application to crack propagation problems in timber engineering.” Wood Sci. Technol., 40(4), 275–290.
Dias, A. M. P. G., Van de Kuilen, J. W., Lopes, S., and Cruz, H. (2007). “A non-linear 3D FEM model to simulate timber-concrete joints.” Adv. Eng. Softw., 38(8–9), 522–530.
Eberhardsteiner, J. (2002). Mechanischesverhalten von fichtenholz: experimentellebestimmung der biaxialenfestigkeitseigenschaften, Springer, Wien, Germany, 174 (in German).
European Committee for Standardization (CEN). (1999). “Timber structures—Glued laminated timber—Strength classes and determination of characteristic values.” EN 1194, Brussels.
Franke, B., and Quenneville, P. (2011). “Numerical modeling of the failure behaviour of dowel connections in wood.” J. Eng. Mech., 186–195.
Gattesco, N., and Toffolo, I. (2004). “Experimental study on multiple-bolt steel-to-timber tension joints.” Mater. Struct., 37(2), 129–138.
Guan, Z. W., and Rodd, P. D. (2001a). “Hollow steel dowels—A new application for semi-rigid timber connections.” Eng. Struct., 23(1), 110–119.
Guan, Z. W., and Rodd, P. D. (2001b). “DVW—Local reinforcement for timber joints.” J. Struct. Eng., 894–900.
Guan, Z. W., and Zhu, E. C. (2009). “Finite element modelling of anisotropic elasto-plastic timber composite beams with openings.” Eng. Struct., 31(2), 394–403.
Guitard, D. (1987). Mécanique du matériau bois et composites, Cepadues édition, Toulouse, France, 238 (in French).
Hill, R. (1948). “A theory of the yielding and plastic flow of anisotropic metals.” Proc. R. Soc. London A, 193(1033), 281–297.
Kasal, B., and Leichti, R. J. (2005). “State of the art in multiaxial phenomenological failure criteria for wood members.” Prog. Struct. Eng. Mater., 7(1), 3–13.
Kasal, B., Pospíšil, S., Jirovsky, I., Heiduschke, A., Drdacky, M., and Haller, P. (2004). “Seismic performance of laminated timber frames with fiber reinforced connections.” Earthquake Eng. Struct. Dyn., 33(5), 633–646.
Kharouf, N., McClure, G., and Smith, I. (2003). “Elasto-plastic modelling of wood bolted connections.” Comput. Struct., 81(8–11), 747–754.
Kharouf, N., McClure, G., and Smith, I. (2005). “Postelastic behavior of single- and double-bolt timber connections.” J. Struct. Eng., 188–196.
Ly, D. P. L. (2006). “Développement de modèles analytiques pour la prédiction du comportement élastique des assemblages mécaniques à broches dans la construction en bois.” Ph.D. thesis, Université de Liège, Liège, Belgium (in French).
Moses, D. M., and Prion, H. G. L. (2003). “A three-dimensional model for bolted connections in wood.” Can. J. Civil. Eng., 30(3), 555–567.
MSC.Marc [Computer software]. MSC Software Corporation, Newport Beach, CA.
O’Loinsigh, C., Oudjene, M., Shotton, E., Pizzi, A., and Fanning, P. (2012). “Mechanical behaviour and 3D stress analysis of multi-layered wooden beams made with welded-through wood dowels.” Compos. Struct., 94(2), 313–321.
Oudjene, M., and Khelifa, M. (2009). “Elasto-plastic constitutive law for wood behaviour under compressive loadings.” Constr. Build. Mater., 23(11), 3359–3366.
Patton-Mallory, M., Cramer, S. M., Smith, F. W., and Pellicane, P. J. (1997a). “Nonlinear material models for analysis of bolted wood connections.” J. Struct. Eng., 1063–1070.
Patton-Mallory, M., Pellicane, P. J., and Smith, F. W. (1997b). “Modeling bolted connections in wood: Review.” J. Struct. Eng., 1054–1062.
Patton-Mallory, M., Pellicane, P. J., and Smith, F. W. (1998a). “Qualitative assessment of failure in bolted connections: Maximum stress criterion.” J. Test. Eval., 26(5), 489–496.
Patton-Mallory, M., Pellicane, P. J., and Smith, F. W. (1998b). “Qualitative assessment of failure in bolted connections: Tsai-Wu stress criterion.” J. Test. Eval., 26(5), 497–505.
Racher, P., Laplanche, K., Dhima, D., and Bouchaïr, A. (2010). “Thermo-mechanical analysis of the fire performance of dowelled timber connection.” Eng. Struct., 32(4), 1148–1157.
Reiterer, A., and Stanzl-Tschegg, S. E. (2001). “Compressive behaviour of softwood under uniaxial loading at different orientations to the grain.” Mech. Mater., 33(12), 705–715.
Sawata, K., and Yasumura, M. (2003). “Estimation of yield and ultimate strengths of bolted timber joints by nonlinear analysis and yield theory.” J. Wood Sci., 49(5), 383–391.
Sjödin, J., Serrano, E., and Enquist, B. (2008). “An experimental and numerical study of the effect of friction in single dowel joints.” Holz als Roh- und Werkstoff, 66(5), 363–372.
Tannert, T., Lam, F., and Vallée, T. (2010). “Strength prediction for rounded dovetail connections considering size effects.” J. Eng. Mech., 358–366.
Xu, B. H., Bouchaïr, A., and Racher, P. (2012). “Analytical study and finite element modeling of timber connections with glued-in rods in bending.” Constr. Build. Mater., 34, 337–345.
Xu, B. H., Bouchaïr, A., Taazount, M., and Vega, E. J. (2009). “Numerical and experimental analyses of multiple-dowel steel-to-timber joints in tension perpendicular to grain.” Eng. Struct., 31(10), 2357–2367.
Yasumura, M., Murota, T., and Sakai, H. (1987). “Ultimate properties of bolted joints in glued-laminated timber.” Proc., CIB-W18 Conf.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Jan 10, 2013
Accepted: Jul 18, 2013
Published online: Jul 24, 2013
Published in print: Jun 1, 2014
Discussion open until: Aug 4, 2014
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.