Triaxial Compressive Strength of Concrete Subjected to High Temperatures
Publication: Journal of Materials in Civil Engineering
Volume 26, Issue 4
Abstract
An experimental study was undertaken to develop an extension of Mohr-Coulomb and Newman models to predict the failure of concrete subjected to elevated temperatures. Concrete specimens of dimensions were prepared and subjected to various temperature levels of 300, 500, and 700°C. The tests were carried out in triaxial cell using various confining stress levels. The applied confining pressures varied between 1.4 and 24 MPa, corresponding to 3 and 54% of the uniaxial compressive strength. Test results indicated that the increase in temperature and/or confining pressure lead to a significant change in the mechanical properties of concrete. Furthermore, the Mohr-Coloumb and Newman models did not provide good fitting of the experimental data obtained on concrete subjected to high temperature of up to 700°C. A dehydrate index is introduced and used to define new variables in the existing models. The modified models are shown to adequately predict the residual strength of concrete that has been subjected to high temperatures.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors wish to thank Georges Lalonde from the Université de Sherbrooke for his support in carrying the experimental program.
References
American Concrete Institute. (1989). “Guide for determining fire endurance of concrete elements.”, Farmington Hills, MI.
Ansari, F., and Li, Q. (1998). “High-strength concrete subjected to triaxial compression.” ACI Mater. J., 95(6), 747–755.
ASTM. (2012). “Standard specification for portland cement.”, West Conshohocken, PA.
Bazant, Z., and Kaplan, M. (1996). Concrete at high temperature: Material properties and mathematical models, Longman Group Ltd., London.
Canadian Standards Association (CSA). (2009). “Concrete materials and methods of concrete construction.”, Rexdale, ON.
Candappa, D., Sanjayan, J., and Setunge, S. (2001). “Complete triaxial stress strain curves of high-strength concrete.” J. Mater. Civ. Eng., 209–215.
Chan, S., Peng, G., and Chan, J. (1996). “Comparaison between high strength concrete and normal strength concrete subjected to high temperature.” Mater. Struct., 29(10), 616–619.
Chen, W.-F. (2007). Plasticity in reinforced concrete, J. Ross Publishing, Fort Lauderdale, FL.
Comité Euro International Du Béton (CEB). (1991). “Fire design of concrete structures.” CEB/FIP Model Code 90, Lausanne, Switzerland.
Comité Européen de Normalisation (CEN). (1993). Eurocode 2: Design of concrete structures: Part 1–2: Structural fire design, Brussels, Belgium.
Comité Européen de Normalisation (CEN). (1994). Eurocode 4: Design of composite steel and concrete structures: Part 1–2: General rules—Structural fire design, Brussels, Belgium.
Divet, L. (2005). Présentation des techniques de diagnostic de l’état d’un béton soumis à un incendie, Laboratoire Central des Ponts et Chaussées, Paris (in French).
Kotsovos, M., and Newman, J. (1978). “Generalized stress-strain relations for concrete.” J. Eng. Mech., 104(4), 845–856.
Lan, S., and Guo, Z. (1997). “Experimental investigation of multiaxial compressive strength of concrete under different stress paths.” ACI Mater. J., 94(5), 427–434.
Lee, J., Xi, Y., and Willam, K. (2008). “Properties of concrete after high-temperature heating and cooling.” ACI Mater. J., 105(4), 334–341.
Li, Q., and Ansari, F. (2000). “High-strength concrete in triaxial compression by different sizes of specimens.” ACI Mater. J., 97(6), 684–689.
Luo, X., Sun, W., and Chan, Y. (2000). “Residual compressive strength and microstructure of high performance concrete after exposure to high temperature.” Mater. Struct., 33(5), 294–298.
Newman, J. B. (1979). “Concrete under complex stress.” Developments in concrete technology, F. Lydon, ed., Vol. 1, Applied Science, London, 151–219.
Petkovski, M. (2010). “Effects of stress during heating on strength and stiffness of concrete at elevated temperature.” Cem. Concr. Res., 40(12), 1744–1755.
Phan, L., and Carino, N. (2000). “Fire performance of high strength concrete: Research needs.” Pric., ASCE/SEI Structures Congress, Applied Technology in Structural Engineering, ASCE, Reston, VA.
Phan, L., Lawson, J., and Davis, F. (2001). “Effects of elevated temperature exposure on heating characteristics, spalling, and residual properties of high performance concrete.” Mater. Struct., 34(2), 83–91.
Pihlajavaara, S. (1972). “An analysis of the factors exerting effect on strength and other properties of concrete at high temperature.” Special publication SP-34, American Concrete Institute, Farmington Hills, MI.
Schneider, U. (1988). “Concrete at high temperature—A general review.” Fire Saf. J., 13(1), 55–68.
Smith, S., Willam, K., Gerstle, K., and Sture, S. (1989). “Concrete over the top–Or, is there life after the peak?” ACI Mater. J., 86(5), 491–497.
Ulm, F.-J., and Coussy, O. (1995). “Modeling of thermo-chemo-mechanical couplings of concrete at early age.” J. Eng. Mech., 785–794.
Ulm, F.-J., and Coussy, O. (1996). “Strength growth as chemo-plastic hardening in early age concrete.” J. Eng. Mech., 1123–1132.
Ulm, F.-J., Coussy, O., and Bazant, Z. (1999). “The ‘Chunnel’ fire. I: Chemoplastic softening in rapidly heated concrete.” J. Eng. Mech., 272–282.
Van Mier, J. (1986). “Fracture of concrete under complex stresses.” Heron, 31(3), 1–89.
Van Mier, J., and Vonk, R. (1991). “Fracture of concrete under multiaxial stress—Recent developments.” Mater. Struct., 24(1), 61–65.
Wang, C.-Z., Guo, Z.-H., and Zhang, X.-Q. (1987). “Experimental investigation of biaxial and triaxial compressive concrete strength.” ACI Mater. J., 84(2), 92–100.
Xie, J., Elwi, A. E., and MacGregor, J. G. (1995). “Mechanical properties of three high-strength concretes containing silica fuma.” ACI Mater. J., 92(2), 135–145.
Information & Authors
Information
Published In
Copyright
© 2013 American Society of Civil Engineers.
History
Received: Nov 15, 2012
Accepted: Jun 6, 2013
Published online: Jun 8, 2013
Discussion open until: Nov 8, 2013
Published in print: Apr 1, 2014
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.