Effect of Supplementary Cementitious Materials on the Performance of Concrete Pavement
Publication: Journal of Materials in Civil Engineering
Volume 26, Issue 4
Abstract
Supplementary cementitious materials (SCMs) have been used in portland cement concrete pavements (PCCP) to increase their resistance to deterioration mechanisms, such as alkali-silica reaction (ASR), freeze and thaw, and permeability. In addition, SCMs are mostly by-products that can effectively reduce material cost and improve concrete sustainability. This paper presents the results of an experimental investigation carried out to evaluate the effect of Class C fly ash, Class F fly ash, and ground granulated blast furnace slag (GGBFS) on the performance of PCCP. Laboratory testing of multiple mixes with different combinations and percentages of SCMs is presented. This testing includes slump, unit weight, air content, time of setting, compressive strength, flexural strength, alkali-silica reactivity, freeze/thaw, length change, chloride ion penetration, and wet/dry test specified by Nebraska Department of Roads (NDOR). Field applications of four candidate mixes at two separate locations are also presented. Test results from laboratory and field investigations indicated that using a combination of Class C fly ash (15–20%) and Class F fly ash (20–25%), or all three SCMs in the range of 15–20% each, improves concrete durability and overall performance.
Get full access to this article
View all available purchase options and get full access to this article.
References
AASHTO. (2010a). “Standard method of test for flexural strength of concrete (using simple beam with third-point loading).” AASHTO T-97, Washington, DC.
AASHTO. (2010b). “Standard method of test for compressive strength of cylindrical concrete specimens.” AASHTO T-22, Washington, DC.
ASTM. (2007). “Standard test method for determining the potential alkali-silica reactivity of combinations of cementitious materials and aggregate (Accelerated Mortar Bar Method).” ASTM C1567, West Conshohocken, PA.
ASTM. (2008a). “Standard test method for length change of hardened hydraulic-cement, mortar, and concrete.” ASTM C157, West Conshohocken, PA.
ASTM. (2008b). “Standard test method for time of setting of concrete mixtures by penetration resistance.” ASTM C403, West Conshohocken, PA.
ASTM. (2008c). “Standard test method for resistance of concrete to rapid freezing and thawing.” ASTM C666, West Conshohocken, PA.
ASTM. (2008d). “Standard test method for electrical indication of concrete’s ability to resist chloride ion penetration.” ASTM C1202, West Conshohocken, PA.
ASTM. (2010a). “Standard test method for air content of freshly mixed concrete by the pressure method.” ASTM C231, West Conshohocken, PA.
ASTM. (2010b). “Standard test method for creep of concrete in compression.” ASTM C512, West Conshohocken, PA.
ASTM. (2012). “Standard test method for slump of hydraulic-cement concrete.” ASTM C143, West Conshohocken, PA.
ASTM. (2013). “Standard test method for density (unit weight), yield, and air content (gravimetric) of concrete.” ASTM C138, West Conshohocken, PA.
Hanna, K. E., Morcous, G., and Tadros, M. K. (2009a). “Class C fly ash in pavements project: SPR (501).” Final Rep., Univ. of Nebraska–Lincoln.
Hanna, K. E., Morcous, G., and Tadros, M. K. (2009b). “Effectiveness of Class C fly ash on mitigating alkali-silica reaction in concrete pavement.” Int. J. Constr. Educ. Res., 5(3), 167–181.
Malhotra, V. M., and Mehta, P. K. (2002). “High-performance, high-volume fly ash concrete: Materials, mixture proportioning, properties, construction practice, and case studies.” Supplementary Cementitious Materials for Sustainable Development, Ottawa.
Malvar, L. J. (2001). “TR-2195-SHR alkali-silica reaction mitigation state-of-the-art.” Naval Facilities Engineering Service Center, Port Hueneme, CA.
Mather, B. (1989). “How to make concrete that will be immune to the effects of freezing and thawing.” Proc., ACI Symp. on Performance of Concrete in Aggressive Environment, American Concrete Institute (ACI), Farmington Hills, MI.
Naik, T. R. (1997). “What you should know for achieving durable concrete construction.” Proc., Cement and Concrete Institute of Mexico Symp., World of Concrete, Guadalajara, Mexico, Concrete and Cement Institute of Mexico, Anzures, México.
Information & Authors
Information
Published In
Copyright
© 2013 American Society of Civil Engineers.
History
Received: May 20, 2011
Accepted: May 23, 2013
Published online: May 25, 2013
Discussion open until: Oct 25, 2013
Published in print: Apr 1, 2014
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.