Technical Papers
Jan 12, 2013

Field Considerations for Calcium Chloride Modification of Soil-Cement

Publication: Journal of Materials in Civil Engineering
Volume 26, Issue 1

Abstract

Calcium chloride (CaCl2) has been used to accelerate strength gain in soil-cement mixtures. While its use in concrete is well established, there are few reports on dosage and temperature controls in soil-cement applications. This article provides laboratory and field data regarding the unconfined compression (UC) strength of soil-cement as a function of temperature, time, and dosage. The results indicate CaCl2 can increase the UC strength of soil-cement mixtures at curing temperatures of 2°C and 21°C while decreasing it dramatically if the initial temperature exceeds 50°C. At a 2°C curing temperature, a dosage of 1% CaCl2 (by weight of cement) increased the average 28-day UC strength from 1,618 to 1,869 kPa (+15.5%) while at 21°C the strength gain was significant at a dosage of 5% CaCl2, increasing the average 28-day UC strength from 1,916 to 2,338 kPa (+22.0%). In general, there is an optimum dosage that varies with temperature and soil type. In terms of field application, it is possible to use conventional construction equipment to wet dose CaCl2 without raising the moisture content by more than 1.5%, a key consideration when in situ conditions are wet relative to target moisture conditions. For the soils tested, the optimum dosages are expected to be closer to that which is specified for cold-weather concreting (e.g., <2% by weight of cement), rather than much higher values reported in the literature.

Get full access to this article

View all available purchase options and get full access to this article.

Acknowledgments

This work was sponsored by the North Carolina Department of Transportation (NCDOT); however, the contents do not necessarily reflect the official views or policies of NCDOT. This report does not constitute a standard, specification, or regulation.
The authors are grateful for the DCP data provided by Tom Hearne of the Geotechnical Engineering Unit of NCDOT, as well as assistance provided by Dr. Vincent Ogunro, Arezou Eslaminejad, Neill Belk, Trey Walker, Brian Weyer, Robert Botzenmayer, Holly Christenbury, Rebekah Vestal, and Patrick Cooksey.

References

American Concrete Institute (ACI). (1990). State-of-the-art report on soil-cement, American Concrete Institute, Committee 230, Farmington Hills, MI.
Andersland, O. B., and Ladanyi, B. (2004). Frozen Ground Engineering, 2nd Ed., Wiley, New York, 363.
ASTM. (2007). “Standard test methods for compressive strength of molded soil-cement cylinders.”, West Conshohocken, PA.
Arman, A., and Saifan, F. (1967). “The effect of delayed compaction on soil-cement.” Highw. Res. Rec., 198, 30–38.
Catton, M. D., and Felt, E. J. (1943). “Effect of soil and calcium chloride admixtures on soil-cement mixtures.” Proc., of the Annual Meeting, Highway Research Board, Washington, DC, 497–529.
Daniels, J. L., and Janardhanam, R. (2005). “Subgrade stabilization alternatives.” Technical Assistance Rep. to North Carolina Dept. of Transportation, Raleigh, NC.
Daniels, J. L., and Janardhanam, R. (2007). “Cold-weather subgrade stabilization.” Soil improvement, Geotechnical Special Publication No. 172, ASCE, Reston, VA, 1–10.
Daniels, J. L., Janardhanam, R., Starnes, J., DeBlasis, N., and Miles, K. (2009). “Cold-weather concreting technology for ground modification.” Contemporary topics in ground modification, problem soils, and geo-support, Geotechnical Special Publication No. 187, ASCE, Reston, VA, 273–280.
Daniels, J. L., Lei, S., Bian, Z., and Bowers, B. F. (2010). “Air-soil relationships for lime and cement stabilized subgrades.” Paving materials and pavement analysis, Geotechnical Special Publication No. 203, ASCE, Reston, VA, 341–346.
Felt, E. J., and Abrams, M. S. (1957). “Strength and elastic properties of compacted soil-cement mixtures.” American Society for Testing and Materials, Philadelphia, 152–178.
Hausmann, M. R. (1990). Engineering principles of ground modification, McGraw-Hill, New York.
Hicks, L. D. (1939). “Sampling, soil classification and cement requirement.” Proc., 19th Annual Meeting, Highway Research Board, Washington, DC.
Lei, S., Daniels, J. L., Bian, Z., and Wainaina, N. (2011). “Improved soil temperature modeling.” Environ. Earth Sci., 62(6), 1123–1130.
Lightsey, G. R., Arman, A., and Callihan, C. D. (1970). “Changes in the characteristics of cement-stabilized soils by addition of excess compaction moisture.” Highw. Res. Rec., 1970(315), 36–45.
Mitchell, J. K. (1976). “The properties of cement stabilized soils.” Proc., of Residential Workshop on Materials and Methods for Low Cost Road, Rail and Reclamation Works, Dept. of Civil Engineering Materials, School of Engineering, Univ. of New South Wales, Paddington, NSW, Australia.
Ness, T. R. (1966). “Addition of calcium chloride increases strength of soil-cement base.” Public Works, Hanley Wood, Washington, DC, 106–108.
North Carolina Dept. of Transportation (NCDOT). (2005). “Quality assurance testing of lime-treated soils utilizing the dynamic cone penetrometer.” Test Method #1-2005, Raleigh, NC.
North Carolina Dept. of Transportation (NCDOT). (2006). Standard specifications for roads and structures, Raleigh, NC.
Occidental Chemical Corporation. (2006). Calcium Chloride in Portland Cement Concrete. Application Information, Dallas, TX.
Portland Cement Association (PCA). (2005). “Soil-cement technology for pavements: Different products for different applications.” Skokie, IL.
Ramachandran, V. S. (1984). Concrete admixtures handbook: Properties, science, and technology, Noyes Publications, Park Ridge, NJ.
Rollings, R. S., Rollings, M. P., and Martel, J. (2002). Chemical stabilization technology for cold weather, U. S. Army Cold Regions Research and Engineering Laboratory, Hanover, NH.
Shen, C.-K., and Mitchell, J. K. (1966). “Behavior of soil-cement in repeated compression and flexure.” Highw. Res. Rec., 1966(128), 68–100.
Thompson, M. R. (1970). “Soil stabilization for pavement systems—state of the art.” Technical Rep. Prepared for Construction Engineering Research Laboratory, Champaign, IL.
Uppot, J. O., Mishra, S. K., and Kalidindi, A. (2008). “Calcium chloride activated road construction with soil-cement.” Proc. of the 8th Int. Workshop on Transportation Planning and Implementation Methodologies for Developing Countries (TPMDC), Transportation Systems Engineering, Civil Engineering Dept., IIT Bombay, Mumbai, India.
West, G. (1959). “Laboratory investigation into the effects of elapsed time after mixing on the compaction and strength of soil-cement.” Geotechnique, 9(1), 22–28.

Information & Authors

Information

Published In

Go to Journal of Materials in Civil Engineering
Journal of Materials in Civil Engineering
Volume 26Issue 1January 2014
Pages: 65 - 70

History

Received: Jun 25, 2012
Accepted: Jan 10, 2013
Published online: Jan 12, 2013
Discussion open until: Jun 12, 2013
Published in print: Jan 1, 2014

Permissions

Request permissions for this article.

Authors

Affiliations

Benjamin F. Bowers [email protected]
S.M.ASCE
Graduate Student, Dept. of Civil and Environmental Engineering, Univ. of Tennessee-Knoxville, Knoxville, TN 37902. E-mail: [email protected]
John L. Daniels [email protected]
P.E.
M.ASCE
Interim Chair, Dept. of Civil and Environmental Engineering, UNC Charlotte, Energy Production and Infrastructure Center, Building #72, Room 3250, 9201 Univ. City Blvd., Charlotte, NC 28223 (corresponding author). E-mail: [email protected]
J. Brian Anderson [email protected]
P.E.
M.ASCE
Associate Professor, Dept. of Civil Engineering, Auburn Univ., Auburn, AL 36849. E-mail: [email protected]

Metrics & Citations

Metrics

Citations

Download citation

If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.

Cited by

View Options

Get Access

Access content

Please select your options to get access

Log in/Register Log in via your institution (Shibboleth)
ASCE Members: Please log in to see member pricing

Purchase

Save for later Information on ASCE Library Cards
ASCE Library Cards let you download journal articles, proceedings papers, and available book chapters across the entire ASCE Library platform. ASCE Library Cards remain active for 24 months or until all downloads are used. Note: This content will be debited as one download at time of checkout.

Terms of Use: ASCE Library Cards are for individual, personal use only. Reselling, republishing, or forwarding the materials to libraries or reading rooms is prohibited.
ASCE Library Card (5 downloads)
$105.00
Add to cart
ASCE Library Card (20 downloads)
$280.00
Add to cart
Buy Single Article
$35.00
Add to cart

Get Access

Access content

Please select your options to get access

Log in/Register Log in via your institution (Shibboleth)
ASCE Members: Please log in to see member pricing

Purchase

Save for later Information on ASCE Library Cards
ASCE Library Cards let you download journal articles, proceedings papers, and available book chapters across the entire ASCE Library platform. ASCE Library Cards remain active for 24 months or until all downloads are used. Note: This content will be debited as one download at time of checkout.

Terms of Use: ASCE Library Cards are for individual, personal use only. Reselling, republishing, or forwarding the materials to libraries or reading rooms is prohibited.
ASCE Library Card (5 downloads)
$105.00
Add to cart
ASCE Library Card (20 downloads)
$280.00
Add to cart
Buy Single Article
$35.00
Add to cart

Media

Figures

Other

Tables

Share

Share

Copy the content Link

Share with email

Email a colleague

Share