Laboratory Evaluation on Recycling Waste Phosphorus Slag as the Mineral Filler in Hot-Mix Asphalt
Publication: Journal of Materials in Civil Engineering
Volume 25, Issue 7
Abstract
Laboratory tests were conducted to evaluate the feasibility of recycling phosphorus slag into hot-mix asphalt (HMA) as mineral fillers. The elemental composition of phosphorus slag was analyzed by energy dispersive spectroscopy (EDS). The pH value, gradation, hydrophilic index, heat stability, and other properties related to mineral filler in asphalt mixture were also tested. The viscoelastic property of asphalt mastics containing phosphorus slag filler was tested by dynamic shear rheometer (DSR). Ground phosphorus slag was added into two HMAs including traditional dense grade mixture and gap-graded stone mastic asphalt (SMA). Moisture susceptibility and rutting potential tests were conducted to investigate the effects of phosphorus slag filler on the mixtures. Tests showed the pH of the slag was alkaline. It was also hydrophobic and stable at high temperature. Thus, it can be potentially used as an antistripping additive in asphalt mixture. The viscoelasticity test showed that phosphorus slag filler improved the stiffness of asphalt in the similar way as the traditional agriculture (Ag) lime mineral additive. The mixture performance tests indicated that phosphorus slag filler significantly increases the resistance of HMAs to rutting and moisture damage.
Get full access to this article
View all available purchase options and get full access to this article.
References
Ali, N., Chan, J. S., Simms, S., Bushman, R., and Bergman, A. T. (1996). “Mechanistic evaluation of fly ash asphalt concrete mixtures.” J. Mater. Civ. Eng., 8(1), 19–25.
Arnold, T. S., Youtcheff, J., and Needham, S. P. (2012). “Use of phosphoric acid as modifier for hot-mix asphalt.” Transportation Research E-Circular, Transportation Research Board, Washington, DC, 40–51.
ASTM. (1999). “Standard test method for effect of moisture on asphalt concrete paving mixtures.” D4867, West Conshohocken, PA.
ASTM. (2007). “Standard test method for indirect tensile (IDT) strength of bituminous mixtures.” D6931-07, ASTM International, West Conshohocken, PA.
Baderna, D., et al. (2011). “A combined approach to investigate the toxicity of an industrial landfill’s leachate: Chemical analyses, risk assessment and in vitro assays.” Environ. Res., 111(4), 603–613.
Collins, R. J., and Ciesielski, S. K. (1994). “Recycling and use of waste materials and byproducts in highway construction.”, Transportation Research Board, Washington, DC.
Feasby, D. G. (1975). “Mineral wastes as railroad ballast.”, Canada Centre for Mineral and Energy Technology, National Mineral Research Program, Mineral Sciences Laboratories, Ottawa.
Federal Highway Administration (FHWA). (2012a). “The use and performance of asphalt binder modified with polyphosphoric acid (PPA).”, Washington, DC.
Federal Highway Administration (FHWA). (2012b). “User guidelines for waste and byproduct materials in pavement construction.”, Washington, DC.
Hotaling, W. W. (1982). Extending aggregate resources, ASTM, West Conshohocken, PA.
Huang, B., Dong, Q., and Burdette, E. G. (2009). “Laboratory evaluation of incorporating waste ceramic materials into Portland cement and asphaltic concrete.” Constr. Build. Mater., 23(12), 3451–3456.
Huang, B., Li, G., Pang, S., and Eggers, J. (2004). “Investigation into waste tire rubber filled concrete.” J. Mater. Civ. Eng., 16(3), 187–194.
Huang, B., Shu, X., and Chen, X. (2007). “Effects of mineral fillers on some properties of HMA mixtures.” Int. J. Pavement Eng., 8(1), 1–9.
Huang, B., Shu, X., Dong, Q., and Shen, J. (2010). “Laboratory evaluation of moisture susceptibility of hot-mix asphalt containing cementitious fillers.” J. Mater. Civ. Eng., 22(7), 667–673.
Huang, B., Shu, X., and Li, G. (2005). “Laboratory investigation of portland cement concrete containing recycled asphalt pavements.” Cem. Concr. Res., 35(10), 2008–2013.
Huang, B., Shu, X., and Vukosavljevic, D. (2011). “Laboratory investigation of cracking resistance of hot-mix asphalt containing screened reclaimed asphalt pavement.’ J. Mater. Civ. Eng., 23(11), 1535–1543.
Kalantar, Z. N., Karim, M. R., and Mahrez, A. (2012). “A review of using waste and virgin polymer in pavement.” Constr. Build. Mater., 33, 55–62.
Ministry of Transport of P.R. China (MTPRC). (2000). “Standard test methods of bitumen and bituminous mixtures for highway engineering (JTJ052–2000).” T0729-1993, China Communications Press, Beijing.
Ministry of Transport of P.R. China (MTPRC). (2004). “Technical specification for construction of highway asphalt pavements (JTG F40–2004).” China Communications Press, Beijing.
Ministry of Transport of P.R. China (MTPRC). (2005). “Test methods of aggregate for highway engineering (JTG E42–2005).” China Communications Press, Beijing.
Moghaddam, T. B., Karim, M. R., and Syammaun, T. (2012). “Dynamic properties of stone mastic asphalt mixtures containing waste plastic bottles.” Constr. Build. Mater., 34, 236–242.
Orange, G., Dupuis, D., Martin, J. V., Farcas, F., Such, C., and Marcant, B. (2004a). “Chemical modification of bitumen through polyphosphoric acid: Properties-microstructure relationship.” Proc., 3rd Eurasphalt Eurobitume Congress in Vienna, Foundation Eurasphalt, Breukelen, Netherlands, 733–745.
Orange, G., Martin, J. V., Menapace, A., Hemsley, M., and Baumgardner, G. L. (2004b). “Rutting and moisture resistance of asphalt mixtures containing polymer and polyphosphoric acid modified bitumen.” Road Mater. Pavement Des., 5(3), 323–354.
Shu, X., and Huang, B. (2008). “Micromechanics-based dynamic modulus prediction of polymeric asphalt concrete mixtures.” Compos. Part B, 39(4), 704–713.
Tao, J. (2008). “Present status and development prospect of yellow phosphorus industry in China.” Inorg. Chem. Ind., 40(6), 1–5.
Uzun, I., and Terzi, S. (2012). “Evaluation of andesite waste as mineral filler in asphaltic concrete mixture.” Constr. Build. Mater., 31, 284–288.
Wang, X., Sun, S., Dai, W., Wang, X., and Tu, N. (2003). “Comparison of treatment processes for phosphorus waste water.” Tech. Equip. Environ. Pollut. Control, 4(10), 57–60.
Wu, S., Zhu, J., Zhong, J., and Wang, D. (2011). “Experimental investigation on related properties of asphalt mastic containing recycled red brick powder.” Constr. Build. Mater., 25(6), 2883–2887.
Information & Authors
Information
Published In
Copyright
© 2013 American Society of Civil Engineers.
History
Received: Nov 12, 2012
Accepted: Dec 27, 2012
Published online: Dec 29, 2012
Published in print: Jul 1, 2013
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.