Experimental Study on the Possibility of Using Steel Fiber–Reinforced Concrete to Reduce Conventional Rebars in Beam-Column Joints
Publication: Journal of Materials in Civil Engineering
Volume 24, Issue 12
Abstract
In rigid-framed railway bridges, because of excessive amounts of rebar in beams and columns, overcongestion at the beam-column joints of rigid-framed railway bridges was investigated in this paper. The experiments were conducted on eight one-sixth scaled specimens that include four T-joint and four knee-joint specimens. In the control specimens, the amount of steel rebars and their arrangements and detailings resembled the as-built configuration of the rigid-framed railway bridge in Japan. In the other specimens, the amount of steel rebars was reduced and steel fibers were varied as 0, 1.0, and 1.5% by volume. The experimental results of the specimens were compared in terms of crack patterns, load-displacement relationships, ductility, energy dissipation capacity, and stiffness degradation and found that the performance of the control specimens and specimens with 1.5% of steel fibers and reduced steel rebars was comparable.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors are grateful to the Center for Urban Earthquake Engineering (CUEE), Tokyo Institute of Technology, for partly supporting the research.
References
American Concrete Institute (ACI) Committee 544. (1996). “State-of-the-art report on fiber reinforced concrete.”, Farmington Hills, Detroit, MI.
American Concrete Institute (ACI) Committee 544. (1999). “Design consideration for steel fiber reinforced concrete.”, Farmington Hills, Detroit, MI.
Bayasi, Z., and Gebman, M. (2002). “Reduction of lateral reinforcement in seismic beam-column connection via application of steel fibers.” ACI Struct. J., 99(6), 772–780.
Bedirhanoglu, I., Ilki, A., Pujol, S., and Kumbasar, N. (2010). “Behavior of deficient joints with plain bars and low-strength concrete.” ACI Struct. J., 107(3), 300–310.
Bischoff, P. H. (2003). “Tension stiffening and cracking of steel fiber-reinforced concrete.” J. Mater. Civil Eng., 15(2), 174–182.
Caltrans. (2010). “Seismic design criteria—Version 1.6.” Chapter 8, California Dept. of Transportation, Sacramento, CA.
Construction Research Institute. (2011). “Monthly construction cost.” Tokyo, Japan (in Japanese).
Duggal, S. K. (2007). Earthquake resistant design of structures, 1st Ed., Oxford Univ. Press, New York.
Filiatrault, A., Ladicani, K., and Massicotte, B. (1994). “Seismic performance of code-designed fiber-reinforced concrete joints.” ACI Struct. J., 91(5), 564–571.
Filiatrault, A., Pineau, S., and Houde, J. (1995). “Seismic behavior of steel-fiber reinforced concrete interior beam-column joints.” ACI Struct. J., 92(5), 543–552.
Gao, J., Sun, W., and Morino, M. (1997). “Mechanical properties of steel fiber-reinforced, high-strength, lightweight concrete.” Cem. Conc. Comps., 19(4), 307–313.
Gefken, P. R., and Ramey, M. R. (1989). “Increased joint hoop spacing in type 2 seismic joints using fiber reinforced concrete.” ACI Struct. J., 86(2), 168–172.
Haach, V. G., El Debs, A. L., and El Debs, M. K. (2008). “Evaluation of the influence of the column axial load on the behavior of monotonically loaded R/C exterior beam-column joints through numerical simulations.” Eng. Struct., 30(4), 965–975.
Hamad, B. S., Haider, E. Y. A., and Harajli, M. H. (2011). “Effect of steel fibers on bond strength of hooked bars in normal-strength concrete.” ACI Struct. J., 108(1), 42–50.
Henager, C. H. (1977). “Steel fibrous, ductile concrete joint for seismic-resistant structures.”, American Concrete Institute, Farmington Hills, MI, 371–386.
Ishibashi, T., and Okamura, H. (1997). “Study on the design earthquake resistance and degree of earthquake damage of reinforced concrete viaducts.” Cem. Conc. Compos., 19(3), 193–201.
Ishibashi, T., and Tsukishima, D. (2009). “Seismic damage of and seismic rehabilitation techniques for railway reinforced concrete structures.” J. Adv. Conc. Technol., 7(3), 287–296.
Iwaki, I. (2011). “Preliminary report on survey of the Great East Japan Earthquake by combined team of concrete committee and committee on structural engineering.” 〈http://committees.jsce.or.jp/report/system/files/3_1_1_0.pdf〉 (Mar. 30, 2011) (in Japanese).
Japan Society of Civil Engineers (JSCE). (2002a). “Standard specifications for concrete structures (materials and construction).” Tokyo, Japan.
Japan Society of Civil Engineers (JSCE). (2002b). “Standard specifications for concrete structures (structural performance verification).” Tokyo, Japan.
Jiuru, T., Chaobin, H., Kaijian, Y., and Yongcheng, Y. (1992). “Seismic behavior and shear strength of framed joint using steel-fiber reinforced concrete.” J. Struct. Eng., 118(2), 341–358.
Joint ACI-ASCE Committee 352. (2002). “Recommendations for design of beam-column connections in monolithic reinforced concrete structures.”, Farmington Hills, Detroit, MI.
Kim, B., Boyd, A. J., and Lee, J. Y. (2011). “Durability performance of fiber-reinforced concrete in severe environments.” J. Comps. Mater., 45(23), 2379–2389,.
Matsumoto, N., Kitago, Y., and Sato, T. (2000). “Restoration, seismic strengthening and seismic design for railway viaducts after Hyogoken-Nanbu earthquake.” Cem. Conc. Compos., 22(1), 47–57.
Nishimura, A. (2004). “Damage analysis and seismic design of railway structures for Hyogoken-Nanbu (Kobe) earthquake.” J. Jpn. Assoc. Earthq. Eng., 4(3), 184–194.
Oh, B. H. (1992). “Flexural analysis of reinforced concrete beams containing steel fibers.” J. Struct. Eng., 118(10), 2821–2836.
Railway Technical Research Institute. (2004). “Design standards for railway structures and commentary (concrete structures).” Tokyo, Japan.
Railway Technical Research Institute. (2005). Design standards for railway structures and commentary (concrete structures)—Verification examples—RC rigid-framed elevated bridges, No. 421. Tokyo, Japan.
Sato, T., Tanimura, Y., Sogabe, M., and Tottori, S. (2005). “Outline of design standard for concrete railway structures.” Q. Railw. Tech. Res. Inst., 46(1), 59–65.
Shakya, K., Matsumoto, K., and Niwa, J. (2011). “Experimental response of steel fiber reinforced concrete knee joints of rigid-framed railway bridges under cyclic loading.” Proc., 8th Int. Conf. on Urban Earthquake Engineering, Center for Urban Earthquake Engineering, Tokyo Institute of Technology, Tokyo, Japan, 743–748.
Shannag, M. J., Abu-Dyya, N., and Abu-Farsakh, G. (2005). “Lateral load response of high performance fiber reinforced concrete beam-column joints.” Constr. Build. Mater., 19(7), 500–508.
Shannag, M. J., Abu-Farsakh, G., and Abu-Dyya, N. (2007). “Modeling the cyclic response of fiber reinforced concrete joints.” Eng. Struct., 29(11), 2960–2967.
Soroushian, P., Mirza, F., and Alhozaimy, A. (1994). “Bonding of confined steel fiber reinforced concrete to deformed bars.” ACI Mater. J., 91(2), 141–149.
Tadokoro, T., Tanimura, Y., and Murono, Y. (2008). “Evaluation method of the limit state of collapse for viaduct columns subjected to repetitive seismicity.” Q. Railw. Tech. Res. Inst., 49(4), 215–221.
Tejchman, J., and Kozicki, J. (2010). Experimental and theoretical investigations of steel-fibrous concrete, Springer Series in Geomechanics and Geoengineering, Springer, New York.
Information & Authors
Information
Published In
Copyright
© 2012 American Society of Civil Engineers.
History
Received: Aug 5, 2011
Accepted: Apr 11, 2012
Published online: Apr 13, 2012
Published in print: Dec 1, 2012
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.