Simulation of Chloride Migration in Compression-Induced Damage in Concrete
Publication: Journal of Materials in Civil Engineering
Volume 24, Issue 7
Abstract
The ingress of chloride ions in a harsh chloride environment leads to the corrosion of reinforcing steel bars and reduction in the service life of concrete structures. Prediction of the service life of chloride-exposed concrete structures is strongly dependent on chloride diffusion coefficient, which in turn is influenced by several factors including materials and environmental parameters, binding of chloride ions to the solid phase of concrete, and the stresses caused by external load acting on the structure. The diffusion of chloride in concrete is increased significantly by damage associated with load-induced stress, which, if not taken into account, can lead to erroneous prediction of the service life. This paper investigates the impact of compressive stress-induced damage on chloride transport in concrete. An experimental investigation involving non-steady-state migration test as per NT BUILD 492 was carried out on unloaded concrete specimens damaged under axial compressive load. Numerical simulation of the rapid chloride-migration test using multiphysics finite element software is presented in which a phenomenological damage model and a chloride-binding isotherm coupled with Nernst-Planck equation is used to evaluate chloride migration in the damaged concrete specimens.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This work has been completed under the KFUPM funded research project FT090004 “Service Life Assessment of Stressed Concrete Members under Chloride Attack”. The authors acknowledge the support of King Fahd University of Petroleum & Minerals, the Department of Civil Engineering, and the Center for Engineering Research at Research Institute.
References
Andrade, C. (1993). “Calculation of chloride diffusion coefficients in concrete from ionic migration measurements.” Cem. Concr. Res.CCNRAI, 23(3), 724–742.
Antoni, H., and Saekin, N. (2003). “Influence of stress on chloride penetration into FRC.” Proc. Jpn. Concr. Inst., 25, 779–784.
Breysse, D., and Gerard, B. (1997). “Transport of fluids in cracked media, Penetration and permeability of concrete: Barriers to organic and contaminating liquids.” RILEM Rep. 16, E&FN Spon, London, 123–153.
Chatzigeorgiou, G., Picandet, V., Khelidj, A., and Pijaudier-Cabot, G. (2005). “Coupling between progressive damage and permeability of concrete: Analysis with a discrete model.” Int. J. Numer. Anal. Methods Geomech.IJNGDZ, 29(10), 1005–1018.
COMSOL [Computer software]. Burlington, MA, COMSOL.
Frederiksen, J., Nilsson, L., Sandberg, P., Pousen, E., Tang, L., and Andersen, A. (1997). “System for estimation of chloride ingress into concrete. Theoretical background.” HETEK Rep. No. 83, The Danish Road Directorate, Herlev, Denmark.
Kachanov, L. M. (1958). “Time of the rupture process under creep conditions.” Isv. Akad. Nauk. SSR. Otd. Tekh. Nauk., 8, 26–31.
Khan, A. R., Al-Gadhib, A. H., and Baluch, M. H. (2007). “Elasto-damage constitutive model for high strength concrete subjected to multiaxial loading.” Int. J. Damage Mech.IDMEEH, 16(3), 361–398.
Marsavina, L., Audenaer, K., De Schutter, G., and Marsavina, D. (2009). “Experimental and numerical determination of chloride penetration in cracked concrete.” Constr. Bldg. Mater., 23(1), 264–274.
Mazars, J., and Pijaudier-Cabot, G. (1989). “Continuum damage theory: Application to concrete.” J. Eng. Mech.JENMDT, 115(2), 345–365.
Mohammed, T. U., and Hamada, H. (2003). “Relationship between free chloride and total chloride contents in concrete.” Cem. Concr. Res.CCNRAI, 33(9), 1487–1490.
Narsilio, G. A., Pivonka, P., and Smith, D. W. (2007). “Comparative study of methods used to estimate ionic diffusion coefficients using migration tests.” Cem. Concr. Res.CCNRAI, 37(8), 1152–1163.
NT BUILD 492. (1999). Concrete, mortar and cement-based repair materials: Chloride migration coefficient from non-steady-state migration experiments, NORDTEST, Espoo, Finland.
Persson, B. (2004). “Chloride migration coefficient of self-compacting concrete.” Mater. Struct.MASTED, 37(266), 82–91.
Popovics, S. (1973). “A numerical approach to the complete stress-strain curve of concrete.” Cem. Concr. Res.CCNRAI, 3(5), 583–599.
Saetta, A., Scotta, R., and Vitaliani, R. (1998). “Mechanical behavior of concrete under physical-chemical attacks.” J. Eng. Mech.JENMDT, 124(10), 1100–1109.
Sahmaran, M. (2007). “Effect of flexure induced transverse crack and self-healing on chloride diffusivity of reinforced mortar.” J. Mater. Sci.JMTSAS, 42(22), 9131–9136.
Sakoi, Y., and Horiguchi, T. (2006). “Loading effects on chloride penetration of fiber reinforced concrete.” Proc. 2nd Int. Fédération Internationale du Béton Congress, Naples, Italy.
Samson, E., and Marchand, J. (2007). “Modeling the transport of ions in unsaturated cement-based materials.” Compos. Struct.COMSE2, 85, 1740–1756.
Shazali, M. A., Rahman, M. K., Al-Gadhib, A. H., and Baluch, M. H. (2012). “Transport modeling of chlorides with binding in concrete.” Arabian J. Sci. Eng., 37(2), 469–479.
Taher, S., Baluch, M. H., and Al-Gadhib, A. H. (1994). “Towards cononical elastoplatic damage model.” Eng. Fract. Mech.EFMEAH, 48(2), 151–166.
Tang, L., and Nilsson, L. O. (1992). “Rapid determination of the chloride diffusivity in concrete by applying an electrical field.” Amer. Concr. Inst. Mater. J.AMAJEF, 49(1), 49–53.
Tang, L., and Nilsson, L. O. (1995). “Chloride binding isotherms- an approach by applying the modified BET equation.” Proc. RILEM Int. Workshop on Chloride Penetration into Concrete, St. Remy-le-Chvreuse, France, 15–18.
Voyiadjis, G. Z., Taqieddin, Z. N., and Kattan, P. I. (2009). “Theoretical formulation of a coupled elastic-plastic anisotropic damage model for concrete using the strain energy equivalence concept.” Int. J. Damage Mech.IDMEEH, 18(7), 603–638.
Wang, L., Soda, M., and Ueda, T. (2008). “Simulation of chloride diffusivity for cracked concrete based on RBSM and truss network model.” J. Adv. Concr. Technol.JACTBX, 6(1), 143–166.
Wischers, G. (1978). “Application of effects of compressive loads on concrete.” Betontech. Ber Nos. 2 and 3, Duesseldorf.
Information & Authors
Information
Published In
Copyright
© 2012. American Society of Civil Engineers.
History
Received: Jan 20, 2011
Accepted: Dec 19, 2011
Published online: Jun 15, 2012
Published in print: Jul 1, 2012
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.