Performance Prediction for Innovative Crushable Material Used in Aircraft Arrestor Beds
Publication: Journal of Materials in Civil Engineering
Volume 24, Issue 6
Abstract
Surveys on innovative materials for aircraft arrestor beds are of great interest in airport safety research. In the event of a runway overrun, the arrestor bed has to provide for the complete stop of the aircraft. In doing so, the bed essentially collapses under the effect of the vertical load of the nose and main gears. Along the contact areas between the wheels and bed, the horizontal drag forces generated depend on the dissipative properties of the material used in the bed. The use of innovative materials in arrestor beds could lead to a significant improvement in the performance of same. In the paper, the authors propose a cellular mortar with expanded polystyrene spheres and the use of static and dynamic tests to determine its characterization. The aim is to optimize its composition in terms of mechanical properties, to evaluate its durability under the effects of environmental actions, and to estimate the stopping distances for selected aircrafts. The code arrestor provided by the Federal Aviation Administration (FAA) was used as a reference for distance calculations.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
Tests on materials were performed in the Safety and Reliability Laboratory and in the Transportation Infrastructures Laboratory of the First School of Engineering (Vercelli campus) of the Politecnico di Torino. Francesco Froio is gratefully acknowledged for his contribution.
References
ASTM. (2000). “Standard test method for effect of water on compressive strength of compacted bituminous mixtures.” D 1075-96 (Reapproved 2000), West Conshohocken, PA.
ASTM. (2003). “Standard test method for resistance of concrete to rapid freezing and thawing.” C 666/C 666M-03, West Conshohocken, PA.
ASTM. (2004). “Standard test method for scaling resistance of concrete surfaces exposed to deicing chemicals.” C 672/C 672M-03, West Conshohocken, PA.
Barsotti, M. A., Puryear, J. M. H., and Stevens, D. J. (2009). “Developing improved civil aircraft arresting systems.” ACRP Rep. 29, TRB, National Research Council, Washington, DC.
Belingardi, G., Avalle, M., and Peroni, L. (2009). “Comparison of the energy absorption capability of crash boxes assembled by spot-weld and continuous joining techniques.” Int. J. Impact Engineering, 36(3), 498–511.
Cook, B., Teubert, C. A., and Hayhoe, G. (1995). “Soft ground arrestor design program.” DOT/FAA/CT-95/, Federal Aviation Administration, U.S. Dept. of Transportation, Springfield, VA.
Engineered Arresting Systems Corporation (ESCO). (2011). “Engineered materials arresting systems.” 〈http://www.esco.zodiacaerospace.com/〉 (Apr. 3, 2012).
European Committee for Standardization (CEN). (2005). “Methods of testing cement—Part 1: Determination of strength.” EN 196-1, European Committee for Standardization, Brussels, Belgium.
Federal Aviation Administration (FAA). (1989). “Airport design.” Publication Advisory Circular AC 150/5300-13, Federal Aviation Administration, U.S. Dept. of Transportation, Washington, DC.
Federal Aviation Administration (FAA). (2005). “Engineered materials arresting systems (EMAS) for aircraft overruns.” Publication Advisory Circular AC-150/5220-22A, Federal Aviation Administration, U.S. Dept. of Transportation, Washington, DC.
Heymsfield, E. (2010). “Performance prediction of the strong company’s soft ground arrestor system using a numerical analysis.” Final Rep., Dept. of Civil Engineering, Univ. of Arkansas, Mack-Blackwell Rural Transportation Center, Fayetteville, AR.
Heymsfield, E., and Halsey, T. L. (2008). “Sensitivity analysis of engineered material arrestor systems to aircraft and arrestor material characteristics.” Transportation Research Record 2052, Transportation Research Board, Washington, DC, 110–117.
International Civil Aviation Organization (ICAO). (2004). “Aerodromes.” Publication Annex 14 to the Convention on Int. Civil Aviation Organization, Vol. I, Montreal.
Office of Sen. F. R. Lautenberg. (2006). “An accident waiting to happen: Over half of America’s airports have runways that fail to meet FAA standards.” 〈http://www.aviationfirejournal.com/aviation/library/10_31_06_FRL_Final_Report_on_Runway_safety.pdf〉 (Jul. 20, 2010).
Santagata, E., Bassani, M., and Sacchi, E. (2010). “Performance of new materials for aircraft arrestor beds.” Transportation Research Record 2177, Transportation Research Board, Washington, DC, 124–131.
White, J. C., and Agrawal, S. K. (1993). “Soft ground arresting system for airports.” DOT/FAA/CT-93/80, Federal Aviation Administration, U.S. Dept. of Transportation, Washington DC.
Wong, J. Y. (1980). “Data processing methodology in the characterization of the mechanical properties of terrain.” J. Terramechanics, 17(1), 13–41.
Information & Authors
Information
Published In
Copyright
© 2012. American Society of Civil Engineers.
History
Received: Jun 5, 2011
Accepted: Nov 10, 2011
Published online: Nov 12, 2011
Published in print: Jun 1, 2012
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.