Recovery from Sulfate Attack in Concrete via Electrokinetic Nanoparticle Treatment
Publication: Journal of Materials in Civil Engineering
Volume 23, Issue 7
Abstract
Microstructural damage induced by sulfate attack in concrete is a cause of primary concern in building foundations and other structures. Most research focuses on prevention. In contrast, the concept of damage recovery has not received significant attention. Studies were conducted using alumina-coated-silica nanoparticles to facilitate an electrochemical recovery of strength. Treatments were applied to extract sulfates while the nanoparticles were being injected. Initial sodium sulfate exposure on cylindrical concrete specimens was conducted for a period of 30 days. This exposure induced body cracking and microstructural damage. The specimens were subjected to electrokinetic treatment using a constant current density of for 7 days. Raman spectroscopy and Fourier transform infrared spectroscopy (FTIR) analysis revealed significant sulfate content in the sulfate-exposed specimens that was not detected in the treated cases. Raman spectroscopy also indicated a higher C-S-H among the treated specimens, and MIP analysis indicated that the treated specimens exhibited a 40% reduction in threshold pore size. The treated specimens also exhibited a 33% increase in compressive strength while the volume porosity decreased by one-third. These findings indicated that the electrokinetic recovery treatment removed sulfates, reduced the volume porosity, and restored a significant amount of compressive strength.
Get full access to this article
View all available purchase options and get full access to this article.
References
American Concrete Institute (ACI). (1991). “Standard practice for selecting proportions for normal, heavy weight and mass concrete.” ACI 211.1, Farmington Hills, MI.
Aligizaki, K. (2005). Pore structure of cement based materials: Testing interpretation and requirements, Taylor and Francis, London, UK.
ASTM. (2001a). “Standard practice for making and curing concrete test specimens in the laboratory.” C192, West Conshohocken, PA.
ASTM. (2001b). “Standard test method for length change of hydraulic-cement mortars exposed to sulfate solution.” C1012-95a, West Conshohocken, PA.
ASTM. (2001c). “Standard test method for making, accelerated curing, and testing concrete compression test specimens.” C684, West Conshohocken, PA.
Bing, T., and Cohen, M. (2000). “Does gypsum formation during sulfate attack on concrete lead to sulfate attack.” Cem. Concr. Res., 30(1), 117–123.
Boyd, A., and Mindess, S. (2004). “The use of tension testing to investigate the effect of w/c ratio and cement type on the resistance of concrete to sulfate attack.” Cem. Concr. Res., 34(3), 373–377.
Brough, A., and Atkinson, A. (2001). “Micro-Raman spectroscopy of thaumasite.” Cem. Concr. Res., 31(3), 421–424.
Cardenas, H., and Kupwade-Patil, K. (2007). “Corrosion remediation using chloride extraction concurrent with electrokinetic pozzolan deposition in concrete.” 6th Symp. on Electrokinetic Remediation, Dept. of Chemical Engineering, Univ. of Vigo, Vigo, Spain, 117.
Cardenas, H., and Struble, L. (2006). “Electrokinetic nanoparticle treatment of hardened cement paste for reduction of permeability.” J. Mater. Civ. Eng., 18(4), 554–560.
Cardenas, H., and Struble, L. (2008). “Modeling electrokinetic nanoparticle penetration for permeability reduction of hardened cement paste.” J. Mater. Civ. Eng., 20(11), 683–691.
Carrasco, L., Rius, J., and Miravitlles, C. (2008). “Supercritical carbonation of calcium aluminate cement.” Cem. Concr. Res., 38(8-9), 1033–1037.
Cohen, M., and Bentur, A. (1988). “Durability of portland cement—Silica fume pastes in magnesium sulfate and sodium sulfate solutions.” ACI Mater. J., 85(3), 148–157.
Cohen, M., and Mather, B. (1991). “Sulfate attack on concrete: Research needs.” ACI Mater. J., 88(1), 62–69.
Collepardi, M. (2001). “Ettringite formation and sulfate attack on concrete.” ACI Special Publication 200, 21–38.
Fajardo, G., Escadeillas, G., and Arliguie, G. (2006). “Electrochemical chloride extraction (ECE) from steel-reinforced concrete specimens contaminated by “artificial” sea-water.” Corros. Sci., 48(1), 110–125.
Ghafoori, N., and Mathis, R. (1997). “Sulfate resistance of concrete pavers.” J. Mater. Civ. Eng., 9(1), 35–40.
Gordon, K., Kupwade-Patil, K., Lee, L., Cardenas, H., and Moral, O. (2008). “Long term durability of reinforced concrete rehabilitated via electrokinetic nanoparticle treatment.” Proc., Excellence in concrete construction through innovation, Taylor and Francis, London, 373–379.
Kirkpatrick, J., Yarger, K., McMillan, P., Yu, P., and Cong, X. (1997). “Raman Spectroscopy of C-S-H, Tobermorite and Jennite.” Adv. Cem. Based Mater., 5, 93–99.
Kupwade-Patil, K. (2007). “A new corrosion mitigation strategy using nanoscale pozzolan deposition.” Master’s thesis, Louisiana Tech Univ., Ruston, LA.
Kupwade-Patil, K., and Cardenas, H. (2008). “Corrosion mitigation in concrete using electrokinetic injection of reactive composite nanoparticles.” Proc., 53rd Int. Symp., Society for the Advancement of Material and Process Engineering, Long Beach, CA.
Kupwade-Patil, K., Gordon, K., Xu, K., Moral, O., Cardenas, H., and Lee, L. (2008). “Corrosion mitigation in concrete using electrokinetic nanoparticle treatment.” Proc., Excellence in concrete construction through innovation, Taylor and Francis, London, 365–371.
Marcotte, T., Hansson, C., and Hope, B. (1999). “The effect of the electrochemical chloride extraction treatment on steel-reinforced mortar, Part I: Electrochemical measurements.” Cem. Concr. Res., 29(10), 1555–1560.
Mehta, P. K. (1983). “Mechanism of sulfate attack on portland cement concrete—Another look.” Cem. Concr. Res., 13, 401–406.
Mindess, S. (2001). “The strength and fracture of concrete: The role of the calcium hydroxide.” Material science of concrete: Calcium hydroxide in concrete, J. Skalny, J. Gebaver and I. Odler, eds., The American Ceramic Society, Westerville, OH, 143–154.
Mindess, S., Young, F., and Darwin, D. (2002). Concrete, 2nd Ed., Prentice Hall, Upper Saddle River, NJ.
Monterio, P., and Kurtis, K. (2003). “Time to failure for concrete exposed to severe sulfate attack.” Cem. Concr. Res., 33(7), 987–993.
Morrison, R., and Boyd, R. (1992). Organic Chemistry, Prentice Hall, Upper Saddle River, NJ.
Naik, N., Jupe, A., Stock, S., Wilkinson, A., Lee, P., and Kurtis, K. (2006). “Sulfate attack monitored by microCT and EDXRD: Influence of cement type, water-to-cement ratio, and aggregate.” Cem. Concr. Res., 36(1), 144–159.
Neville, A. (1996). Properties of concrete, Wiley, New York.
Neville, A. (2004). “The confused world of sulfate attack.” Cem. Concr. Res., 34(8), 1275–1296.
Nielsen, J. (1966). “Investigation of resistance of cement paste to sulfate attack.” Highway Res. Rec., 113, 114–117.
Odler, I. (2000). Special inorganic cements, E and FN Spon, London.
Orellan, J., Ecsadeillas, G., and Arligue, G. (2004). “Electrochemical chloride extraction: Efficiency and side effects.” Cem. Concr. Res., 34(2), 227–234.
Pajares, I., Ramirez, S., and Varela, M. (2003). “Evolution of ettringite in presence of carbonate, and silicate ions.” Cem. Concr. Compos., 25(8), 861–865.
Potgieter-Vermaak, S., Potgieter, J., and Van Grieken, R. (2006). “The application of raman spectrometry to investigate and characterize cement, Part I: A review.” Cem. Concr. Res., 36(4), 656–662.
Ramachandran, V., and Beaudoin, J. (2001). Handbook of analytical techniques in concrete science and technology, William Andrew Publishing, New York.
Rasheeduzzafar, O., Al-Amoudi, O., Abduljauwad, S., and Maslehuddin, M. (1994). “Magnesium-sodium sulfate attack in plain and blended cements.” J. Mater. Civ. Eng., 6(2), 201–222.
Sahmaran, M., Erdem, T., and Yaman, I. (2007). “Sulfate resistance of plain and blended cements exposed to wetting-drying and heating-cooling environments.” Constr. Build. Mater., 21(8), 1771–1778.
Shazali, M., Baluch, M., and Al-Gadhib, H. (2006). “Predicting residual strength in unsaturated concrete exposed to sulfate attack.” J. Mater. Civ. Eng., 18(3), 343–354.
Skalny, J., Marchand, J., and Odler, I. (2001). Sulfate attack on concrete, Taylor and Francis, London.
Taylor, H. F. W. (1997). Cement chemistry, 2nd Ed., Thomas Telford, London.
Tikalsky, P., and Carrasquillo, R. (1992). “Influence of fly ash on the sulfate resistance of concrete.” ACI Mater. J., 89(1), 69–75.
Winslow, D. (1989). “Some experimental possibilities with mercury intrusion porosimetry.” Pore structure and permeability of cementitious materials, Proc Vol. 137, Materials Research Society, Warrendale, PA, 93–103.
Yu, P., Kirkpatrick, J., Poe, B., McMillan, P., and Cong, X. (1999). “Structure of calcium silicate hydrate (C-S-H) near, mid, and far-infrared spectroscopy.” J. Am. Ceram. Soc., 82(3), 742–748.
Information & Authors
Information
Published In
Copyright
© 2011 American Society of Civil Engineers.
History
Received: Sep 14, 2010
Accepted: Dec 20, 2010
Published online: Dec 22, 2010
Published in print: Jul 1, 2011
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.