Compressive Strength of Self-Compacting Concrete during High-Temperature Exposure
Publication: Journal of Materials in Civil Engineering
Volume 22, Issue 10
Abstract
Self-compacting concrete (SCC) is being used in high-rise buildings and industrial structures which may be subjected to high temperatures during operation or in case of an accidental fire. The proper understanding of the effects of elevated temperatures on the properties of SCC is necessary. This paper reports the results of laboratory investigations carried out to study the effects of high temperatures ranging from room temperature to on the compressive strength of different water-cement ratio SCC and high-strength concrete. It is found that the hot compressive strength of SCC decreases with increasing temperature. Compared with normal-strength SCC, high-strength SCC possesses a larger compressive strength exposed to high temperature. Another result of tests is that addition of polypropylene fibers decreased the strength and probability of explosive spalling.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The paper includes partial study in Tongji University and Magnel Laboratory for Concrete Research, Ghent University. The financial support from the National Key Technology R&D Program (Grant No. UNSPECIFIED2006BAJ27B02-02 PI, Yuan Yong) and Scientific Research Foundation for the Returned Overseas Chinese Scholars is gratefully acknowledged.
References
Annerel, E., Taerwe, L., and Vandevelde, P. (2007). “Assessment of temperature increase and residual strength of SCC after fire exposure.” 5th Int. RILEM Symp. on SCC, RILEM Publications S.A.R.L., Ghent, Belgium, 715–720.
Boström, L. (2003). “Self-compacting concrete exposed to fire.” Int. RILEM Symp. on Self-Compacting Concrete, Proc. PRO, Vol. 33, RILEM Publications S.A.R.L., Reykjavik, 863–869.
Castillo, C. (1990). “Effect of transient high temperature on high-strength concrete.” ACI Mater. J., 87(1), 47–53.
EFNARC. (2005). The European guidelines for self-compacting concrete specification: Production and use, ⟨http://www.efnarc.org/publications.html⟩.
Fares, H., Noumowe, A., and Remond, S. (2009). “Self-consolidating concrete subjected to high temperature: Mechanical and physicochemical properties.” Cem. Concr. Res., 39, 1230–1238.
GB/T. (2002). “Standard of test method of mechanical properties on ordinary concrete.” GB/T 50081 (in Chinese).
Han, L. H., Zhao, X. L., Yang, Y. F., and Feng, J. B. (2003). “Experimental study and calculation of fire resistance of concrete-filled hollow steel columns.” J. Struct. Eng., 129(3), 346–356.
Kalifa, P., Chéné, G., and Gallé, C. (2001). “High-temperature behaviour of HPC with polypropylene fibres: From spalling to microstructure.” Cem. Concr. Res., 31, 1487–1499.
Kodur, V. K. R., and Lie, T. T. (1996). “Fire resistance of circular steel columns filled with fiber-reinforced concrete.” J. Struct. Eng., 122(7), 776–782.
Liu, X. (2005). “Microstructural investigation of self-compacting concrete and high-performance concrete during hydration and after exposure to high temperatures.” Ph.D. thesis, Ghent Univ., Ghent, Belgium.
Liu, X., Ye, G., De Schutter, G., Yuan, Y., and Taerwe, L. (2008). “On the mechanism of polypropylene fibres in preventing fire spalling in self-compacting and high-performance cement paste.” Cem. Concr. Res., 38(4), 487–499.
Lu, H., Zhao, X. L., and Han, L. H. (2009). “Fire behaviour of high strength self-consolidating concrete filled steel tubular stub columns.” J. Constr. Steel Res., 65(10–11), 1995–2010.
Malhotra, H. L. (1956). “The effect of temperature on the compressive strength of concrete.” Mag. Concrete Res., 23, 85–94.
Noumowé, A., Carré, H., Daoud, A., and Toutanji, H. (2006). “High-strength self-compacting concrete exposed to fire test.” J. Mater. Civ. Eng., 18(6), 754–758.
Persson, B. (2004). “Fire resistance of self-compacting concrete, SCC.” Mater. Struct., 7(10), 575–584.
Phan, L. T. (1996). “Fire performance of high-strength concrete: A report of the state-of-the-art.” NISTIR 5934, National Institute of Standards and Technology, Gaithersburg, Md.
Phan, L. T., and Carino, N. J. (1998). “Review of mechanical properties of HSC at elevated temperature.” J. Mater. Civ. Eng., 10, 58–64.
Phan, L. T., and Peacock, R. D. (1999). “Experimental plan for testing the mechanical properties of high-strength concrete at elevated temperatures.” NISTIR 6210, Gaithersburg, Md.
Poon, C. S., Shui, Z. H., and Lam, L. (2004). “Compressive behavior of fiber reinforced high-performance concrete subjected to elevated temperatures.” Cem. Concr. Res., 34, 2215–2222.
Serdar, A., and Yazici, H. (2007). “High temperature resistance of normal strength and autoclaved high strength mortars incorporated polypropylene and steel fibres.” Constr. Build. Mater., 22, 504–512.
Sideris, K. K. (2007). “Mechanical characteristics of self-consolidating concretes exposed to elevated temperatures.” J. Mater. Civ. Eng., 19(8), 648–654.
Srinivasa Rao, K., Potha Raju, M., and Raju, P. S. N. (2006). “Effect of elevated temperature on compressive strength of HSC made with OPC and PPC.” Indian Concr. J., 80, 43–48.
Stegmaier, M., and Reinhardt, H. -W. (2004). “Fire behaviour of plain self-compacting concrete (SCC).” Otto-Graf J., 15, 33–42.
Suhaendi, S. L., and Horiguchi, T. (2006). “Takashi effect of short fibers on residual permeability and mechanical properties of hybrid fibre reinforced high strength concrete after heat exposition.” Cem. Concr. Res., 36, 1672–1678.
Tao, J. (2009). “Transient strain of self-compacting concrete at high temperature.” Journal of Building Materials, 12(1), 47–51.
Vanwalleghem, H., Blontrock, H., and Taerwe, L. (2003). “Spalling tests on self-compacting concrete.” Int. RILEM Symp. on Self-Compacting Concrete, Proc. PRO, Vol. 33, RILEM Publications S.A.R.L., Reykjavik, 855–869.
Zhao, X. L., and Han, L. H. (2006). “Double skin composite construction.” Prog. Struct. Eng. Mater., 8(3), 93–102.
Information & Authors
Information
Published In
Copyright
© 2010 ASCE.
History
Received: Sep 6, 2009
Accepted: Mar 12, 2010
Published online: Mar 16, 2010
Published in print: Oct 2010
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.