Numerical Modeling of Flow Field in Three Types of Vortex Settling Basins
Publication: Journal of Irrigation and Drainage Engineering
Volume 147, Issue 12
Abstract
Vortex settling basins (VSBs) are efficient and economical structures that use free-surface vortex strength to remove sediment particles from flow. In this study, computational fluid dynamics was employed to predict and evaluate the effects of basin geometry on performance and flow field structure. The flow field was calculated using Reynolds-averaged Navier–Stokes modeling and large eddy simulation. Verification of the numerical simulations was carried out based on experimental data obtained using a typical VSB model. The Smagorinsky model results for abstraction ratio, velocity component, and free-surface flow were superior to those of the other turbulence models. The distinctive features of two previously proposed designs for vortex settling basins were investigated, and a new geometry to enhance these features is presented. The results indicated that the new geometry provided better performance in generating a symmetric central vortex, lengthening the particle settling path and decreasing the abstraction ratio.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, or code that support the findings of this study are available from the corresponding author upon reasonable request.
References
Athar, M., U. C. Kothyari, and R. G. Garde. 2002. “Sediment removal efficiency of vortex chamber type sediment extractor.” J. Hydraul. Eng. Proc. Am. Soc. Civ. Eng. 128 (2): 1051–1059. https://doi.org/10.1061/(ASCE)0733-9429(2002)128:12(1051).
Athar, M., U. C. Kothyari, and R. G. Garde. 2003. “Distribution of sediment concentration in the vortex chamber type sediment extractor.” J. Hydraul. Res. 41 (4): 427–438. https://doi.org/10.1080/00221680309499987.
Brennan, M. 2006. “CFD simulations of hydrocyclones with an air core: Comparison between large eddy simulations and a second moment closure.” Chem. Eng. Res. Des. 84 (6): 495–505. https://doi.org/10.1205/cherd.05111.
Chapelierb, J., B. Wasisthoa, and C. Scalob. 2018. “A coherent vorticity preserving eddy viscosity correction for large eddy simulation.” J. Comput. Phys. 359: 164–182. https://doi.org/10.1016/j.jcp.2018.01.012.
Chen, Y., C. Wu, B. Wang, and M. Du. 2012. “Three-dimensional numerical simulation of vertical vortex at hydraulic intake.” J. Procedia Eng. 28 (Jan): 55–60. https://doi.org/10.1016/j.proeng.2012.01.682.
Delgadillo, J. A., and R. K. Rajamani. 2005. “A comparative study of three turbulence closure models for the hydrocyclone problem.” Int. J. Miner. Process. 77 (4): 217–230. https://doi.org/10.1016/j.minpro.2005.06.007.
Duinmeijer, A., G. Oldenziel, and F. Clemens. 2019. “Experimental study on the 3d-flow field of a free-surface vortex using stereo PIV.” J. Hydraul. Res. 58 (818): 1–15. https://doi.org/10.1080/00221686.2018.1555558.
Durango-Cogollo, M., J. Garcia-Bravo, B. Newell, and A. Gonzalez-Mancera. 2020. “CFD modeling of hydrocyclones—A study of efficiency of hydrodynamic reservoirs.” J. Fluids 5 (118): 1–19. https://doi.org/10.3390/fluids5030118.
Germano, M., U. Piomelli, P. Moin, and W. Cabot. 1991. “A dynamic subgrid-scale eddy viscosity model.” Phys. Fluids 3 (7): 1760–1765. https://doi.org/10.1063/1.857955.
Goring, D. G., and V. I. Nikora. 2002. “Despiking acoustic doppler velocimeter data.” J. Hydraul. Eng. 128 (1): 117–126. https://doi.org/10.1061/(ASCE)0733-9429(2002)128:1(117).
Gueyffier, D., J. Li, A. Nadim, R. Scardovelli, and S. Zaleski. 1999. “Volume-of-fluid interface tracking with smoothed surface stress methods for three-dimensional flows.” J. Comput. Phys. 152 (2): 423–456. https://doi.org/10.1006/jcph.1998.6168.
He, P., M. Salcudean, I. S. Gartshore, and P. Nowak. 1996. “Mulitgrid calculation of fluid flows in complex 3d geometries using curviliear grids.” J. Comput. Fluids 25 (4): 395–419. https://doi.org/10.1016/0045-7930(96)00002-3.
Henderson, F. M. 1966. Open channel flow. New York: MacMi1lan.
Huang, T. H., C. D. Jan, and Y. C. Hsu. 2017. “Numerical simulations of water surface profiles and vortex structure in a vortex settling basin by using flow-3d.” J. Mar. Sci. Technol. 25 (5): 531–542. https://doi.org/10.6119/JMST-017-0509-1.
Karimi, M., G. Akdogan, A. Dehghani, and S. Bradshaw. 2011. “Selection of suitable turbulence models for numerical modelling of hydrocyclones.” J. Chem. Prod. Process Model. 6 (1): 1–28. https://doi.org/10.2202/1934-2659.1622.
Keshavarzi, A., and A. Gheisi. 2006. “Trap efficiency of vortex settling basin for exclusion of fine suspended particles in irrigation canals.” J. Irrig. and Drain. 55 (4): 419–434. https://doi.org/10.1002/ird.263.
Kiringu, K., and G. Basson. 2019. “Removal of fine non-cohesive sediment by swirl/vortex settling basin at small river abstraction works.” In Proc., 19th Int. Conf. on Transport and Sedimentation of Solid Particles, 311–318. Cape Town, South Africa: Cape Peninsula Univ. of Technology. http://ts.upwr.edu.pl/.
Kiringu, K., and G. Basson. 2021. “Factors influencing the removal of fine non-cohesive sediment by vortex settling basin at small river abstraction works.” Int. J. Sediment Res. 36 (4): 501–511. https://doi.org/10.1016/j.ijsrc.2020.12.004.
Launder, B. E., and D. B. Spalding. 1972. Lectures in mathematical models of turbulence, 157–162. London: Academic Press.
Li, L., P. Wang, Y. Ma, and Y. Wu. 2020. “Reducing sediment deposition on deflector in vortex settling basins.” J. Irrig. Drain. Eng. 146 (10): 06020009. https://doi.org/10.1061/(ASCE)IR.1943-4774.0001508.
Li, Y., and Q. Guo. 2012. “Angular velocity formula for turbulent vortex chamber flows.” J. Hydraul. Eng. 138 (5): 467–470. https://doi.org/10.1061/(ASCE)HY.1943-7900.0000547.
McDonough, J. M. 2007. Introductory lectures on turbulence physics, mathematics, and modeling. Lexington, KY: Univ. of Kentucky.
Menter, F. R., M. Kuntz, and R. Langtry. 2003. “Ten years of industrial experience with the SST turbulence model.” In Heat and mass transfer, 625–632. New York: Begell House.
Mulligan, S., J. Casserly, and R. Sherlock. 2016. “Effects of geometry on strong free-surface vortices in subcritical approach flows.” J. Hydraul. Eng. 142 (11): 04016051. https://doi.org/10.1061/(ASCE)HY.1943-7900.0001194.
Mulligan, S., J. Casserly, R. Sherlock, B. Dewals, S. Erpicum, P. Archambeau, and M. Pirotton. 2014. “Hydrodynamic investigation of free-surface turbulent vortex flows with strong circulation in a vortex chamber.” In Proc., 5th IAHR Int. Junior Researcher and Engineer Workshop on Hydraulic structures, 28–30. Beijing: Hydraulic Structures Committee of IAHR.
Mulligan, S., G. De Casre, J. Casserly, and R. Sherlock. 2018. “Understanding turbulent free surface vortex flows using a Taylor-Couette flow analogy.” J. Nat. Sci. Rep. 824: 1–14.
Patankar, S. V. 1980. Numerical Heat Transfer and Fluid Flow. New York: McGraw Hill.
Paul, T., S. Sayal, V. S. Sakhanja, and G. Dhillon. 1991. “Vortex settling chamber design considerations.” J. Hydraul. Eng. 117 (2): 172–189. https://doi.org/10.1061/(ASCE)0733-9429(1991)117:2(172).
Paul, T. C. 1988. Designing circulation chamber sediment extracter. Wallingford, UK: Hydraulic Research.
Piomelli, U., and J. R. Chasnov. 1996. Large eddy simulation: Theory and applications turbulence and transition modelling, 269–336. New York: Springer.
Premnath, K. N., M. J. Pattison, and S. Banerjee. 2009. “Dynamic sub-grid scale modeling of turbulent flows using lattice-Boltzmann method.” J. Comput. Phys. 388 (13): 2640–2685. https://doi.org/10.1016/j.physa.2009.02.041.
Rehman, A., M. Athar, and T. Mansoor. 2017. “Mechanism of vortex motion.” ISH J. Hydraul. Eng. 23 (2): 135–143. https://doi.org/10.1080/09715010.2016.1252700.
Rodi, W., G. Constantinescu, and T. Stoesser. 2013. Large-eddy simulation in hydraulics. 1st ed. Leiden, Netherlands: CRC Press.
Saidi, M., R. Maddahian, and B. Farhanieh. 2011. “Deoiling hydrocyclones flow field-a comparison between k-epsilon and les.” Int. J. Mech. Mechatron. Eng. 5 (11): 2292–2295. https://doi.org/10.5281/zenodo.1070075.
Skerlavaj, A., L. Skerget, J. Ravnik, and A. Lipej. 2011. “Choice of a turbulence model for pump intakes.” Proc. Inst. Mech. Eng., Part A: J. Power Energy 225 (6): 764–778. https://doi.org/10.1177/0957650911403870.
S. R. Nikou, N. 2018. “Large eddy simulation in vortex settling basins.” Ph.D. thesis, Ferdowsi Univ. of Mashhad, Dept. of Water Science and Engineering.
S. R. Nikou, N., A. N. Ziaei, H. Ansary, and J. M. McDonough. 2021. “Flow field investigation in a vortex settling basin using acoustic doppler velocimetry and large eddy simulation.” J. Water Environ. 35: 865–883. https://doi.org/10.1111/wej.12675.
Suerich-Gulick, F., S. J. Gaskin, M. Villeneuve, and E. Parkinson. 2014. “Free surface intake vortices: Theoretical model and measurements.” J. Hydraul. Res. 52 (4): 502–512. https://doi.org/10.1080/00221686.2014.896425.
Sun, H., and Y. Liu. 2015. “Theoretical and experimental study on the vortex at hydraulic intakes.” J. Hydraul. Res. 53 (6): 787–796. https://doi.org/10.1080/00221686.2015.1076533.
Tokyay, T., and S. Constantinescu. 2005. “Coherent structures in pump intake flows: A large eddy simulation study.” In Proc., 31st Int. Association Hydraulic Research Congress, 231–232. Seoul, Korea: Association Hydraulic Research Congress. http://www.koreascience.or.kr/article/CFKO200507523367717.pub.
Utikar, R., N. Darmawan, M. Tadel, Q. Li, G. Evans, M. Glenny, and V. Pareek. 2010. “Hydrodynamic simulation of cyclone separators.” In Computational fluid dynamics book, edited by H. W. Oh. Rijeka, Croatia: InTech Publisher. https://doi.org/10.5772/7106.
Vakamalla, T. R., and N. Mangadoddy. 2016. “Numerical simulation of industrial hydrocyclones performance: Role of turbulence modelling.” J. Sep. Purif. Technol. 176 (Apr): 23–39. https://doi.org/10.1016/j.seppur.2016.11.049.
Wahl, T. L. 2003. “Discussion of “despiking acoustic doppler velocimeter data by Derek G. Goring and Vladimir I. Nikora.” J. Hydraul. Eng. 129 (6): 484–487. https://doi.org/10.1061/(ASCE)0733-9429(2003)129:6(484).
Zhang, C., D. Wei, B. Cui, T. Li, and N. Luo. 2017. “Effects of curvature radius on separation behaviors of the hydrocyclone with a tangent-circle inlet.” J. Powder Technol. 305 (Jan): 156–165. https://doi.org/10.1016/j.powtec.2016.10.002.
Ziaei, A. N. 2007. “Generalized 3d curvilinear numerical modeling of laminar and turbulent free-surface flows in a vortex settling basin.” Ph.D. thesis, Dept. of Water Science and Engineering, Shiraz Univ.
Ziaei, A. N., J. M. McDonough, H. Emdadad, and A. R. Keshavarzi. 2007. “Using vorticity to define conditions at multiple open boundaries for simulating flow in a simplified vortex settling basin.” Int. J. Numer. Methods Fluids 54 (1): 1–28. https://doi.org/10.1002/fld.1389.
Information & Authors
Information
Published In
Copyright
© 2021 American Society of Civil Engineers.
History
Received: Dec 8, 2020
Accepted: Aug 3, 2021
Published online: Sep 20, 2021
Published in print: Dec 1, 2021
Discussion open until: Feb 20, 2022
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- N. S. R. Nikou, A. N. Ziaei, M. Dalir, Study of Effective Parameters on Performance of Vortex Settling Basins Using Taguchi Method, Journal of Irrigation and Drainage Engineering, 10.1061/(ASCE)IR.1943-4774.0001648, 148, 2, (2022).