New Theoretical Solution of the Outflow Process for a Weir with Complex Shape
Publication: Journal of Irrigation and Drainage Engineering
Volume 142, Issue 10
Abstract
In this paper, the outflow process of a weir with an irregular shape is studied using dimensional analysis and the incomplete self-similarity theory. The new unique stage–discharge relationship, which is deduced theoretically, represents a novel and comprehensive equation to describe the weir outflow process for a full range of flow and different geometric variables of weirs, including finite-crested weirs, broad-crested weirs with positive or negative crest slope, broad-crested weirs with an upstream, downstream, or both upstream and downstream crest ramps, and, triangular weirs with an upstream or downstream ramp. Finally the proposed stage–discharge relationship is calibrated using measurements available in literature.
Get full access to this article
View all available purchase options and get full access to this article.
References
Aydin, I., Burcu Altan-Sakarya, A., and Sisman, C. (2011). “Discharge formula for rectangular sharp-crested weirs.” Flow Meas. Instrum., 22(2), 144–151.
Azimi, A., Rajaratnam, N., and Zhu, D. (2013a). “Discharge characteristics of weirs of finite crest length with upstream and downstream ramps.” J. Irrig. Drain Eng., 75–83.
Azimi, A., Rajaratnam, N., and Zhu, D. (2013b). “Discussion of “New theoretical solution of the stage-discharge relationship for sharp-crested and broad weirs.” by Ferro, V.” J. Irrig. Drain Eng., 516–517.
Azimi, A. H., and Rajaratnam, N. (2009). “Discharge characteristics of weirs of finite crest length.” J. Hydraul. Eng., 1081–1085.
Bagheri, S., and Heidarpour, M. (2010). “Flow over rectangular sharp-crested weirs.” Irrig. Sci., 28(2), 173–179.
Barenblatt, G. I. (1979). Similarity, self-similarity and intermediate asymptotics, Consultants Bureau, NY.
Barenblatt, G. I. (1987). Dimensional analysis, Gordon & Breach, Science Publishers, Amsterdam, Netherlands.
Bijankhan, M., Di Stefano, C., Ferro, V., and Kouchakzadeh, S. (2014). “New stage-discharge relationship for weirs of finite crest length.” J. Irrig. Drain Eng., 06013006-1–06013006–8.
Boiten, W. (2000). Hydrometry, Balkema, Rotterdam, Netherlands.
De Martino, G., and Ragone, A. (1984). “Effects of viscosity and surface tension on slot weirs flow.” J. Hydraul. Res., 22(5), 327–341.
Di Stefano, C., Ferro, V., and Bijankhan, M. (2014). “Discussion of “Discharge characteristics of weirs of finite crest length with upstream and downstream ramps” by Amir Hossein Azimi, Nallamuthu Rajaratnam, and David Z. Zhu.” J. Irrig. Drain Eng., 07013002.
Ferro, V. (1997). “Applying hypothesis of self-similarity for flow-resistance law of small-diameter plastic pipes.” J. Irrig. Drain. Eng., 175–179.
Ferro, V. (2000). “Simultaneous flow over and under a gate.” J. Irrig. Drain. Eng., 190–193.
Ferro, V. (2006). La sistemazione dei bacini idrografici, 2nd Ed., McGraw-Hill, Milan, Italy, 848 (in Italian).
Ferro, V. (2012). “New theoretical solution of the stage-discharge relationship for sharp-crested and broad weirs.” J. Irrig. Drain Eng., 257–265.
Ferro, V. (2013). “Closure to “New theoretical solution of the stage-discharge relationship for sharp-crested and broad weirs.” by Azimi, A., Rajaratnam, N., and Zhu, D.” J. Irrig. Drain Eng., 518–520.
Hager, W. H., and Schwalt, M. (1994). “Broad-crested weir.” J. Irrig. Drain. Eng., 13–26.
Herschy, H. (1999). “Hydrometry.” Principles and practices, Wiley, New York, 55–60.
Horton, R. E. (1907). “Weir experiments, coefficients, and formulas.” Proc., U.S. Geological Survey Water Supply, Government Printing Office, Washington, DC.
Johnson, M. C. (2000). “Discharge coefficient analysis for flat-topped and sharp crested weirs.” Irrig. Sci., 19(3), 133–137.
Kandaswamy, P. K., and Rouse, H. (1957). “Characteristics of flow over terminal weirs and sills.” J. Hydraul. Div., 83(4), 1345-1–1345-130.
Kindsvater, C. E., and Carter, R. W. (1957). “Discharge characteristics of rectangular thin-plate weirs.” J. Hydraul. Div., 83(6), 1–36.
Kumar, S., Ahmad, Z., and Mansoor, T. (2011). “A new approach to improve the discharging capacity of sharp-crested triangular plan form weirs.” Flow Meas. Instrum., 22(3), 175–180.
Ramamurthy, A. S., Tim, U. S., and Rao, M. V. J. (1988). “Characteristics of square-edged and round-nosed broad-crested weirs.” J. Irrig. Drain. Eng., 61–73.
Ranga Raju, K. G., and Asawa, G. L. (1977). “Viscosity and surface tension effects on weir flow.” J. Hydr. Div., 103(10), 1227–1231.
Sarginson, E. J. (1972). “The influence of surface tension on weir flow.” J. Hydraul. Res., 10(4), 431–446.
Sargison, J., and Percy, A. (2009). “Hydraulics of broad-crested weirs with varying side slopes.” J. Irrig. Drain Eng., 115–118.
Sisman, H. C. (2009). “Experimental investigation on sharp-crested rectangular weirs.” M.Sc. thesis, Middle East Univ., Ankara, Turkey.
Swamee, P. K. (1988). “Generalized rectangular weir equations.” J. Hydraul. Eng., 945–949.
Tison, L.-J. (1950). “Broad-crested weir [Le déversoir à seuil épais].” La Houille Blanche, 4, 426–439.
Woodburn, J. G. (1932). “Tests on broad-crested weirs.” Trans. ASCE, 96, 387–408.
Information & Authors
Information
Published In
Copyright
© 2016 American Society of Civil Engineers.
History
Received: Jan 22, 2015
Accepted: Feb 9, 2016
Published online: May 12, 2016
Published in print: Oct 1, 2016
Discussion open until: Oct 12, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.