Energy Grade Line Assessment for Tapered Microirrigation Laterals
Publication: Journal of Irrigation and Drainage Engineering
Volume 142, Issue 7
Abstract
In pressurized irrigation systems the total long-term costs can often be minimized by dividing the pipeline into segments of different diameters. To properly design such a system requires an accurate hydraulic analysis. In this study, an analytical procedure was developed to simulate the energy grade line along trickle laterals with dual pipe sizes. Appropriate equations were developed to accurately estimate several important design factors such as the total head loss (), the total required head at the inlet () and the minimum pressure head along the lateral (). The methodology takes into account the effect of the number of outlets along each reach of the lateral, outflow nonuniformity, friction factor variation, velocity head changes, and local losses. Friction losses were evaluated using the power form equation of the Darcy-Weisbach formula. Local losses and velocity head change were both addressed by obtaining an average along the lateral constant coefficient which is a function of the number of outlets and the outflow at the downstream end of each reach. Two power functions were also used to estimate the outflow nonuniformity along each segment of the lateral. The accuracy of the proposed method is very high in all cases examined and the results tend to accurately follow the numerical stepwise solution. Assuming a uniform outflow for the proposed method results in accurate estimations of and but generally not of . The nonuniform outflow approach, on the other hand, calculates all three design parameters with a high degree of accuracy.
Get full access to this article
View all available purchase options and get full access to this article.
References
Al-Amoud, A. I. (1995). “Significance of energy losses due to emitter connections in trickle irrigation lines.” J. Agric. Eng. Res., 60(1), 1–5.
Anwar, A. A. (1999). “Factor G for pipelines with equally spaced multiple outlets and outflow.” J. Irrig. Drain. Eng., 34–38.
Anyoji, H., and Wu, I. P. (1985). “Statistical approach for drip lateral design.” Trans. ASAE, 30(1), 187–192.
Bagarello, V., Ferro, V., Provenzano, G., and Pumo, D. (1995). “Experimental study on flow-resistance law for small-diameter plastic pipes.” J. Irrig. Drain. Eng., 313–316.
Bagarello, V., Ferro, V., Provenzano, G., and Pumo, D. (1997). “Evaluating pressure losses in drip-irrigation lines.” J. Irrig. Drain. Eng., 1–7.
Boman, B. J., Clark, G. A., Haman, D. Z., Harrison, D. S., Izuno, F. T., Pitts, D. J., and Zazueta, F. S. (1991). “Efficiencies of Florida agricultural irrigation systems.” Florida Cooperative Extension Service, Institute of Food and Agricultural Sciences, Univ. of Florida, Gainesville, FL.
Bralts, V. F., and Segerlind, L. J. (1985). “Finite element analysis of drip irrigation submain units.” Trans. ASAE, 28(3), 809–814.
Fengjiao, Z., and Fujun, W. (2005). “Extended stepwise method (ESM) for hydraulic analysis of sprinkler irrigation system.” J. China Agric. Univ., 10(6), 47–50.
Hokam, E. M., El-Hendawy, S. E., and Schmidhalter, U. (2011). “Drip irrigation frequency: The effects and their interaction with nitrogen fertilization on maize growth and nitrogen use efficiency under arid conditions.” J. Agron. Crop Sci., 197(3), 186–201.
Howell, T. A., and Barinas, F. A. (1980). “Pressure losses across trickle irrigation fittings and emitters.” Trans. ASAE, 23(4), 928–933.
Jeppson, R. W. (1982). Analysis of flow in pipe networks, 5th Ed., Ann Arbor Science, Ann Arbor, MI.
Juana, L., Rodriguez-Sinobas, L., and Losada, A. (2002). “Determining minor head losses in drip irrigation laterals. II: Experimental study and validation.” J. Irrig. Drain. Eng., 385–396.
Kang, Y., and Nishiyama, S. (1996). “A simplified method for design of microirrigation laterals.” Trans. ASAE, 39(5), 1681–1687.
Keller, J., and Bliesner, R. D. (1990). Sprinkle and trickle irrigation, Van Nostrand Reinhold, New York.
Khemaies, Z., and Moncef, H. (2009). “Design of level ground laterals in trickle irrigation systems.” J. Irrig. Drain. Eng., 620–625.
Provenzano, G., and Pumo, D. (2004). “Experimental analysis of local pressure losses for microirrigation laterals.” J. Irrig. Drain. Eng., 318–324.
Provenzano, G., Pumo, D., and Di Dio, P. (2005). “Simplified procedure to evaluate head losses in drip irrigation laterals.” J. Irrig. Drain. Eng., 525–532.
Sadeghi, S. H., Mousavi, S. F., Gheysari, M., and Sadeghi, S. H. R. (2010). “Evaluation of the Christiansen method for calculation of friction head loss in horizontal sprinkler laterals: Effect of variable outflow in outlets.” Iran. J. Sci. Technol., 35(2), 233–245.
Sadeghi, S. H., Mousavi, S. F., Sadeghi, S. H. R., and Abdolali, M. (2012). “Factor H for the calculation of head loss and sizing of dual-diameter laterals.” J. Agric. Sci. Technol., 14, 1555–1565.
Sadeghi, S. H., Peters, R. T., and Lamm, F. R. (2015). “Design of zero slope microirrigation laterals: Effect of the friction factor variation.” J. Irrig. Drain. Eng., 04015012.
Sadeghi, S. H., and Peters, T. (2010). “Modified G and G AVG correction factors for laterals with multiple outlets and outflow.” J. Irrig. Drain. Eng., 697–704.
Sadeghi, S. H., and Peters, T. (2012). “Analytical determination of distribution uniformity for microirrigation tapered laterals laid on uphill and horizontal slopes.” J. Irrig. Drain. Eng., 483–489.
Sadeghi, S. H., and Peters, T. (2013). “Adjusted friction correction factors for center-pivots with an end-gun.” Irrig. Sci., 31(3), 351–358.
Sadeghi, S. H., and Peters, T. (2014). “Closure to ‘Analytical determination of distribution uniformity for microirrigation tapered laterals laid on uphill and horizontal slopes’ by Sayed Hossein Sadeghi and Troy Peters.” J. Irrig. Drain. Eng., 07014031.
Valiantzas, J. D. (1998). “Analytical approach for direct drip lateral hydraulic calculation.” J. Irrig. Drain. Eng., 300–305.
Valiantzas, J. D. (2002a). “Continuous outflow variation along irrigation laterals: Effect of the number of outlets.” J. Irrig. Drain. Eng., 34–42.
Valiantzas, J. D. (2002b). “Hydraulic analysis and optimum design of multidiameter irrigation laterals.” J. Irrig. Drain. Eng., 78–86.
Valiantzas, J. D. (2005). “Modified Hazen-Williams and Darcy-Weisbach equations for friction and local head losses along irrigation laterals.” J. Irrig. Drain. Eng., 342–350.
Vallesquino, P. (2008). “An approach for simulating the hydraulic performance of irrigation laterals.” Irrig. Sci., 26(6), 475–486.
Vallesquino, P., and Luque-Escamilla, P. L. (2001). “New algorithm for hydraulic calculation in irrigation laterals.” J. Irrig. Drain. Eng., 254–260.
Vallesquino, P., and Luque-Escamilla, P. L. (2002). “Equivalent friction factor method for hydraulic calculation in irrigation laterals.” J. Irrig. Drain. Eng., 278–286.
Von Bernuth, R. D. (1990). “Simple and accurate friction loss equation for plastic pipe.” J. Irrig. Drain. Eng., 294–298.
Warrick, A. W., and Yitayew, M. (1988). “Trickle lateral hydraulics. I: Analytical solution.” J. Irrig. Drain. Eng., 281–288.
Watters, G. Z., and Keller, J. (1978). “Trickle irrigation tubing hydraulics.” ASAE, St. Joseph, MO.
Wu, I. P. (1992). “Energy gradient line approach for direct hydraulic calculation in drip irrigation design.” Irrig. Sci., 13(1), 21–29.
Wu, I. P., and Gitlin, H. M. (1975). “Energy gradient line for drip irrigation laterals.” J. Irrig. Drain. Eng., 101(4), 323–326.
Wu, I. P., and Gitlin, H. M. (1977). “Design of drip irrigation lines with varying pipe sizes.” J. Irrig. Drain. Eng., 103(4), 499–503.
Yildirim, G., and Agiralioglu, N. (2004). “Linear solution for hydraulic analysis of tapered microirrigation laterals.” J. Irrig. Drain. Eng., 78–87.
Zayani, K., Alouini, A., Lebdi, F., and Lamaddalena, N. (2001). “Design of drip line in irrigation systems using the energy drop ratio approach.” Trans. ASAE, 44(5), 1127–1133.
Information & Authors
Information
Published In
Copyright
© 2016 American Society of Civil Engineers.
History
Received: Oct 9, 2015
Accepted: Dec 17, 2015
Published online: Mar 22, 2016
Published in print: Jul 1, 2016
Discussion open until: Aug 22, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.