Stage–Discharge Relationship for an Upstream Inclined Grid with Transversal Bars
This article has a reply.
VIEW THE REPLYPublication: Journal of Irrigation and Drainage Engineering
Volume 142, Issue 2
Abstract
Check dams with grids upgrading upstream are often used in mountain rivers, where intense sediment transport and steep slopes occur. In some cases, sloping grids are used in the construction of debris flow breakers. In this paper, the outflow process of an upstream-inclined grid with transversal bars is studied by using the dimensional analysis and the incomplete self-similarity theory. Next, the theoretical analysis shows that a power equation can be used for establishing the stage-discharge equation. The coefficient of the power equation depends on both the slope angle and the void ratio, whereas the exponent depends only on the slope angle. Finally, this deduced stage–discharge relationship is tested by laboratory measurements obtained using a sloping grid with transversal bars having different values of the slope angle and the void ratio.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
Both of the authors developed the theoretical analysis, analyzed the results, and contributed to the writing of the paper. The research was supported by a grant of the Project of the University of Palermo “Caratteri eco-fluvio-morfologici e sistemazioni idrauliche dei torrenti siciliani” (FFR 2012/2013).
References
Barenblatt, G. I. (1979). Similarity, self-similarity and intermediate asymptotics, Consultants Bureau, New York.
Barenblatt, G. I. (1987). Dimensional analysis, Gordon & Breach Science, Amsterdam.
Di Stefano, C., and Ferro, V. (2013). “Experimental study of the stage-discharge relationship for an upstream inclined grid with longitudinal bars.” J. Irrig. Drain. Eng., 691–695.
Di Stefano, C., and Ferro, V. (2014). “Closure on ‘Experimental study of the stage-discharge relationship for an upstream inclined grid with longitudinal bars’.” J. Irrig. Drain. Eng., 07014028.
Ferro, V. (1997). “Applying hypothesis of self-similarity for flow-resistance of small-diameter plastic pipes.” J. Irrig. Drain. Eng., 175–179.
Ferro, V. (2006). La sistemazione dei bacini idrografici, 2nd Ed., McGraw-Hill, Italy (in Italian).
Genet, E. (1953). “Un noveau type de barrage de correction: Le barage-peign.” Compte rendu général du voyage d’etudes dan le Alpe Francaise du Grroupe de Travail FAO/EFCTORR, 1st Session, Nancy (in French).
Mizuyama, T., and Mizumo, H. (1994). “Behavior of debris flow at control structures.” Proc., IAHR Int. Workshop on Floods and Inundation Related to Large Earth Movements, C2.1–C2.12.
Nash, J. E., and Sutcliffe, J. V. (1970). “River flow forecasting through conceptual models. Part 1: A discussion of principles.” J. Hydrol., 10, 282–290.
Quignones, R. (1964). “Sul moto delle correnti lente che effluiscono da griglie acclivi.” Atti dell’Accademia di Scienze Lettere e Arti di Palermo, Serie IV, Vol. XXV, 1–34 (in Italian).
Vatankhah, A. R. (2014). “Discussion of ‘Experimental study of the stage-discharge relationship for an upstream inclined grid with longitudinal bars’.” J. Irrig. Drain. Eng., 07014027-1–07014027-3.
Information & Authors
Information
Published In
Copyright
© 2015 American Society of Civil Engineers.
History
Received: Mar 11, 2015
Accepted: Aug 10, 2015
Published online: Sep 25, 2015
Published in print: Feb 1, 2016
Discussion open until: Feb 25, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.