Continuous Modeling of Bioinfiltration Storm-Water Control Measures Using Green and Ampt
Publication: Journal of Irrigation and Drainage Engineering
Volume 139, Issue 12
Abstract
Continuous simulation of storm-water control measures (SCM) requires consideration of the variable environmental and site factors that affect infiltration. This article reviews the theory of the Green and Ampt infiltration model and presents a unit process approach to how it can be applied to a bioinfiltration SCM. The paper discusses how to vary the soil moisture parameters using the soil water characteristic curve, how to modify the Green and Ampt equation for different basin cross-sections, and how to model or bound the infiltration rate when soil media layers are added. Both the standard Green and Ampt parameters and alternative moisture conditions were compared with data from a bioinfiltration SCM; these results confirm that the standard parameter tables often used to select Green and Ampt parameters represent conservative, wet conditions, and that a single value for the parameters will not be able to reproduce the range of infiltration rates observed in the field. When using variable soil moisture conditions, the Green and Ampt model adequately reproduces the infiltration rates observed at the bioinfiltration site.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors wish to thank Pennsylvania’s Growing Greener Grant and Pennsylvania’s 319 Non Point Source Program for providing funding for this research. They also thank the Villanova Urban Stormwater Partnership (VUSP) for their continued support.
References
Brakensiek, D. L. (1977). “Estimating the effective capillary pressure in the Green and Ampt infiltration equation.” Water Resour. Res., 13(3), 680–682.
Chu, S. T. (1995). “Effect of initial water content on Green-Ampt parameters.” Trans. ASAE, 38(3), 839–841.
Chu, X., and Mariño, M. A. (2005). “Determination of ponding condition and infiltration into layered soils under unsteady rainfall.” J. Hydrol., 313(3–4), 195–207.
Emerson, C. H., and Traver, R. G. (2008). “Multi-year and seasonal variation of infiltration from stormwater best management practices.” J. Irrigat. Drain. Eng., 134(5), 598–605.
Fredlund, D. G. (2006). “Unsaturated soil mechanics in engineering practice.” J. Geotech. Geoenviron. Eng., 132(3), 286–321.
Jenkins, J. K. Gilbert, Wadzuk, B. M., and Welker, A. L. (2010) “Fines accumulation and distribution in a storm-water rain garden nine years postconstruction.” J. Irrig. Drain. Eng., 136(12), 862–869.
Green, W. H., and Ampt, G. A. (1911). “Studies on soil physics. 1. The flow of air and water through soils.” J. Agric. Sci., 4(1), 1–24.
Heasom, W., Traver, R. G., and Welker, A. (2006) “Hydrologic modeling of a bioinfiltration best management practice using HEC-HMS.” J. Am. Water Resour. Assoc., 42(5), 1329–1347.
Philip, J. R. (1993). “Variable-head ponded infiltration under constant or variable rainfall.” Water Resour. Res., 29(7), 2155–2165.
Philip, J. R. (1998). “Infiltration into crusted soils.” Water Resour. Res., 34(8), 1919–1927.
Rawls, W. J., Ahuja, J. R., and Brakensiek, D. L. (1992). “Estimating soil hydraulic properties from soils data.” Workshop on Indirect Methods for Estimating the Hydraulic Properties of Unsaturated Soils, USDA, Riverside, CA, 329–341.
Rawls, W. J., Brakensiek, D. L., and Miller, N. (1983). “Green-Ampt infiltration parameters from soils data.” J. Hydrol. Eng., 109(1), 62–70.
Richards, L. A. (1931). “Capillary conduction of liquids through porous mediums.” J. Appl. Phys., 1(5), 318–333.
Rossman, L. A. (2010). “Storm water management model user’s manual.” U.S. Environmental Protection Agency, Cincinatti, OH.
Schaap, M. G. (1999). “Class-average values of hydraulic parameters.” Rosetta user’s guide, USDA, Riverside, CA.
Twarakavi, N. K. C., Sakai, M., and Šimůnek, J. (2009). “An objective analysis of the dynamic nature of field capacity.” Water Resour. Res., 45(10), W10410.
van Genuchten, M. Th. (1980). “closed-form equation for predicting the hydraulic conductivity of unsaturated soils.” Soil Sci. Am. J., 44(5), 892–898.
Wang, Q., Shao, M., and Horton, R. (1999). “Modified Green and Ampt models for layered soil infiltration and muddy water infiltration.” Soil Sci., 164(7), 445–453.
Yu, B. (1999). “A comparison of the Green-Ampt and a spatially variable infiltration model for natural storm events.” Trans. ASAE, 42(1), 89–97.
Information & Authors
Information
Published In
Copyright
© 2013 American Society of Civil Engineers.
History
Received: Nov 29, 2012
Accepted: Jul 5, 2013
Published online: Nov 15, 2013
Published in print: Dec 1, 2013
Discussion open until: Apr 15, 2014
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.