Scour due to Crossing Jets at Fixed Vertical Angle
Publication: Journal of Irrigation and Drainage Engineering
Volume 137, Issue 1
Abstract
Plunge pool scour is an important topic in hydraulic structures design. Numerous studies have been done in past years to understand the scour phenomenon due to plunging jets. These studies finally aimed at reducing the risk of structural undermining and collapse. Scour holes created under various hydraulic and geometrical conditions were analyzed for both two-dimensional and three-dimensional cases, and methods to reduce the scour were also investigated. In the current study, an attempt was made to quantify the feasibility of using crossing jets. The scour process was analyzed, and various relationships were presented to predict the main geometrical parameters, i.e., maximum scour hole depth, scour hole length, and scour hole width. Scour profiles were also compared with those due to an equivalent single jet. The main parameters on which the scour geometry depends were found as the densimetric Froude number of the jet, the crossing angle between the jets, the distance between the crossing point and the water surface level, and the water depth. All experiments have been carried out for a fixed vertical angle of 45°.
Get full access to this article
View all available purchase options and get full access to this article.
References
Breusers, H. N. C. (1966). “Conformity and time scale in two-dimensional local scour.” Proc., Symp. Model and Prototype Conformity, Delft Hydraulics, Delft, The Netherlands, 1–8.
Breusers, H. N. C., and Raudkivi, A. J. (1991). “Scouring.” IAHR hydraulic structures design manual 2, Balkema, Rotterdam, The Netherlands.
Canepa, S., and Hager, W. H. (2003). “Effect of air jet content on plunge pool scour.” J. Hydraul. Eng., 129(5), 358–365.
Dey, S., and Sarkar, A. (2006a). “Scour downstream of an apron due to submerged horizontal jets.” J. Hydraul. Eng., 132(3), 246–257.
Dey, S., and Sarkar, A. (2006b). “Scour response of velocity and turbulence in submerged wall jets to abrupt change from smooth to rough beds and its application to scour downstream of an apron.” J. Fluid Mech., 556, 387–419.
Li, L. -X., Liao, H. -S., and Li, T. -X. (2006). “A hybrid model for simulating velocity field of a river with complex geometry plunged by multiple jets.”, 18(6), 752–759.
Mason, P. J. (1989). “Effects of air entrainment on plunge pool scour.” J. Hydraul. Eng., 115(3), 385–399.
Mason, P. J. (2002). “Review of plunge pool rock scour downstream of Srisailam dam.” Rock scour due to falling high-velocity jets, A. Schleiss, E. Bolleart, and EPFL-LCH, eds., Balkema-Swets & Zeitlinger, The Netherlands, 25–31.
Mih, W. C. (1982). “Scouring effects of water jets impinging on non-uniform streambeds.” Proc., Conf. Applying Research to Hydraulic Practice, P. E. Smith, ed., ASCE, New York, 270–279.
Mih, W. C., and Kabir, J. (1983). “Impingement of water jets on nonuniform streambeds.” J. Hydraul. Eng., 109(4), 536–548.
Pagliara, S., Amidei, M., and Hager, H. (2008). “Hydraulics of 3D plunge pool scour.” J. Hydraul. Eng., 134(9), 1275–1284.
Pagliara, S., Hager, W. H., and Minor, H. -E. (2004). “Plunge pool scour in prototype and laboratory.” Int. Conf. Hydraulics of Dams and River Structures, Balkema, Lisse, The Netherlands, 165–172.
Pagliara, S., Hager, W. H., and Minor, H. -E. (2006). “Hydraulics of plane plunge pool scour.” J. Hydraul. Eng., 132(5), 450–461.
Pagliara, S., Roy, D., and Palermo, M. (2010). “3D plunge pool scour with protection measures.” J. Hydro-Environment Research, in press.
Rajaratnam, N., and Aderibigbe, O. (1993). “A method for reducing scour below vertical gates.” Proc. Inst. Civ. Eng., Waters. Maritime Energ., 101(2), 73–83.
Information & Authors
Information
Published In
Copyright
© 2011 ASCE.
History
Received: Nov 6, 2009
Accepted: Jun 29, 2010
Published online: Jul 12, 2010
Published in print: Jan 2011
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.