Preliminary Studies of Hydraulic and Mechanical Behavior of Nanoparticle-Based Light Backfill Exposed to Pore Fluid Salinity
Publication: Journal of Hazardous, Toxic, and Radioactive Waste
Volume 21, Issue 2
Abstract
Because of its high swelling pressure and low hydraulic conductivity, compacted bentonite–sand is widely accepted as a barrier/backfill material used in deep geological repositories to safely contain highly toxic radioactive waste. The majority of research conducted in this field shows that the pore fluid salinity present in the repository’s environment reduces the swelling capacity and increases the hydraulic conductivity of backfill material. However, research has yet to determine how to improve the material properties of backfill under saline water conditions. In this study, two different percentages of nanoparticles derived from bentonite (1 and 2% with respect to dry weight of bentonite) were carefully mixed with a bentonite–sand mixture to prepare a nanoparticle-based light backfill. Next, the effect of different concentrations of NaCl and on the hydraulic and mechanical behavior of a bentonite–sand mixtures was examined, at a maximum dry density of . The results showed that solutions have more influence on material performance as compared to NaCl solutions. Additionally, results indicated that the presence of nanoparticles reduces the hydraulic conductivity and the rate of consolidation for saline-solution-saturated light backfill; however, no major improvement of swelling pressure was observed within the scope of this experimental approach.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
Financial support for this research was obtained from the Natural Sciences and Engineering Research Council of Canada (NSERC)/Discovery Grants Program (Grant # 62R09724). The first author is also grateful to the Dean of the College of Graduate Studies of University of British Columbia (UBC) Okanagan campus for the University Graduate Fellowship (UGF) award.
References
Aitken, R. J., Chaudhry, M. Q., Boxall, A. B. A., and Hull, M. (2006). “Manufacture and use of nanomaterials: Current status in the UK and global trends.” Occup. Med. (Chic Ill), 56(5), 300–306.
ASTM. (2004). “Standard test method for laboratory determination of water (moisture) content of soil and rock by mass.” ASTM D2435-04, West Conshohocken, PA.
Bailey, S. W. (1979). “Summary of recommendations of AIPEA nomenclature committee.” Clay Sci., 5, 209–220.
Bardet, J. P. (1997). Experimental soil mechanics, Prentice Hall, Upper Saddle River, NJ.
Baumgartner, P., Priyanto, D., and Baldwin, J. R. (2008). “Preliminary results of one-dimensional consolidation testing on bentonite clay-based sealing components subjected to two pore-fluid chemistry conditions.”, Nuclear Waste Management Organisation, Toronto.
Budhu, M., Giese, R. F., Jr., Campbell, G., and Baumgrass, L. (1991). “The permeability of soils with organic fluids.” Can. Geotech. J., 28(1), 140–147.
Castellanos, E., Villar, M. V., and Romero, E. (2008). “Chemical impact on the hydro-mechanical behaviour of high-density FEBEX bentonite.” Phys. Chem. Earth, 33, S516–S526.
Dixon, D. A., Chandler, N. A., and Baumgartner, P. (2002). “The influence of groundwater salinity and interfaces on the performance of potential backfilling materials.” Proc., 6th Int. Workshop on Design and Construction of Final Repositories, Backfilling in Radioactive Waste Disposal, ONDRAF/NIRAS, Brussels, Belgium, 11–13.
Dixon, D. A., Gray, M. N., and Graham, J. (1996). “Swelling and hydraulic properties of bentonites from Japan, Canada and USA.” Proc., 2nd Int. Congress on Environmental Geotechnics, Balkema, Rotterdam, the Netherlands, 43–48.
Grim, R. E., and Guven, N. (2011). “Bentonites: Geology, mineralogy, properties and uses.” Developments in sedimentology, Elsevier, Amsterdam, Netherlands, 256.
Hochella, M. F., Lower, S. K., and Maurice, P. A. (2008). “Nanominerals, mineral nanoparticles, and earth systems.” Science, 319(5870), 1631–1635.
Işık, N. S. (2009). “Estimation of swell index of fine grained soils using regression equations and artificial neural networks.” Sci. Res. Essay, 4(10), 1047–1056.
Jönsson, B., Åkesson, T., and Jönsson, B. (2009). “Structure and forces in bentonite MX-80.”, Swedish Nuclear Fuel and Waste Management, Stockholm, Sweden.
Karnland, O. (1998). “Bentonite swelling pressure in strong NaCl solutions: Correlation of model calculations to experimentally determined data.”, POSIVA OY, Finland, 98–101.
Karnland, O., Nilsson, U., Olsson, S., and Sellin, P. (2005). “Experimental study on sealing properties of commercial bentonites related to bentonite mineralogy and water solution composition.” Clays in natural and engineered barriers for radioactive waste confinement, Andra, Tours, France, 229–230.
Karnland, O., Olsson, S., and Nilsson, U. (2006). “Mineralogy and sealing properties of various bentonites and smectite-rich clay materials.”, Stockholm, Sweden.
Karnland, O., Pusch, R., and Sandén, T. (1992). “The importance of electrolyte on the physical properties of MX-80 bentonite.”, Swedish Nuclear Fuel and Waste Management Company, SKB International AB, Stockholm, Sweden.
Koch, D. (2008). “European bentonites as alternatives to MX-80.” Sci. Technol., 334, 23–30.
Lee, J., Kim, H. J., Park, G. L., and Kang, M. (2012). “Energy consumption scheduler for demand response systems in the smart grid.” J. Inf. Sci. Eng., 28(5), 955–969.
Lloret, A., Villar, M., and Sanchez, M. (2003). “Mechanical behaviour of heavily compacted bentonite under high suction changes.” Géotechnique, 53(1), 27–40.
Madsen, F. T. (1998). “Clay mineralogical investigations related to nuclear waste disposal.” Clay Miner., 33(1), 109–129.
Mata, C., and Ledesma, A. (2005). “Hydro-chemical behaviour of bentonite-based mixtures in engineered barriers.” Advances in Understanding Engineered Clay Barriers: Proc., Int. Symp. on Large Scale Field Tests in Granite, Sitges, CRC Press, London, 203–210.
Mitchell, J. K., and Madsen, F. T. (1987). “Chemical effects on clay hydraulic conductivity.” Geotechnical Practice for Waste Disposal’87, ASCE, Reston, VA, 87–116.
NWMO (National Waste Management Organization). (2005). “Choosing a forward: The future management of Canada’s used nuclear fuel, final study.”, Toronto.
Odom, I. E. (1984). “Smectite clay minerals: Properties and uses.” Philosophical Transactions of the Royal Society of London, 391–409.
Priyanto, D. G., Blatz, J. A., and Siemens, G. A. (2008). “The effects of initial conditions and liquid composition on the one-dimensional consolidation behaviour of clay-based sealing materials.” NWMO TR-2008-06, Toronto.
Pusch, R. (1980). “Swelling pressure of highly compacted bentonite.”, SKB, Stockholm, Sweden.
Pusch, R. (2002). “The buffer and backfill handbook. Part 1: Definitions, basic relationships, and laboratory methods.”, SKB, Stockholm, Sweden.
Reddy, C. M., Pearson, A., and Xu, L. (2002). “Radiocarbon as a tool to apportion the sources of polycyclic aromatic hydrocarbons and black carbon in environmental samples.” Environ. Sci. Technol., 36(8), 1774–1782.
Reeves, G. M., Sims, I., and Cripps, J. C. (2006). Clay materials used in construction, Geological Society of London, London.
Reschke, A. E., and Haug, M. D. (1991). “The physico-chemical properties of bentonites and the performance of sand-bentonite mixtures.” Proc., 44th Canadian Geotechnical Conf., Calgary, AB, Canada.
Sarkar, G., Dey, A., and Siddiqua, S. (2016). “Preparation of Wyoming bentonite nanoparticles.” Environ. Geotech., in press.
Sarkar, G., and Siddiqua, S. (2016). “Effect of fluid chemistry on the microstructure of light backfill: An X-ray CT investigation.” Eng. Geol., 202, 153–162.
Siddiqua, S., Blatz, J., and Siemens, G. (2011). “Evaluation of the impact of pore fluid chemistry on the hydromechanical behaviour of clay-based sealing materials.” Can. Geotech. J., 48(2), 199–213.
Siddiqua, S., Siemens, G., Blatz, J., Man, A., and Lim, B. F. (2014). “Influence of pore fluid chemistry on the mechanical properties of day-based materials.” Geotech. Geol. Eng., 32(4), 1029–1042.
Sivapullaiah, P. V., Sridharan, A., and Stalin, V. K. (2000). “Hydraulic conductivity of bentonite-sand mixtures.” Can. Geotech. J., 37(2), 406–413.
Villar, M. V. (2005). “MX-80 bentonite.” Thermal-hydro-mechanical characterisation performed at CIEMAT in the context of the prototype project, Centro de Investigaciones Energeticas, Medioambientales y Tecnologicas (CIEMAT), Madrid, Spain.
Warkentin, B. P., and Schofield, R. K. (1962). “Swelling pressure of Na-Montmorillonite in NaCl solutions.” J. Soil Sci., 13(1), 98–105.
Waychunas, G. A., Kim, C. S., and Banfield, J. F. (2005). “Nanoparticulate iron oxide minerals in soils and sediments: Unique properties and contaminant scavenging mechanisms.” J. Nanoparticle Res., 7(4–5), 409–433.
Weimin, M. Y., Zhang, F., and Chen, B. G. (2014). “Effects of salt solutions on the hydro-mechanical behavior of compacted GMZ01 bentonite.” Environ. Earth Sci., 72(7), 2621–2630.
Xie, M., Moog, H. C., and Kolditz, O. (2007). “Geochemical efffects on swelling pressure of highly compacted bentonite: Experiments and model analysis.” Theoretical and numerical unsaturated soil mechanics, Springer, Berlin, 93–100.
Information & Authors
Information
Published In
Journal of Hazardous, Toxic, and Radioactive Waste
Volume 21 • Issue 2 • April 2017
Copyright
© 2016 American Society of Civil Engineers.
History
Received: Jan 6, 2016
Accepted: Apr 7, 2016
Published online: Jun 13, 2016
Discussion open until: Nov 13, 2016
Published in print: Apr 1, 2017
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.