Methodology for Estimating Optimum Reuse Time Span: Application to Reusable Computer Waste
Publication: Practice Periodical of Hazardous, Toxic, and Radioactive Waste Management
Volume 14, Issue 3
Abstract
Computer waste has considerable reverse flow in terms of reuse and recycles. The reuse component is particularly significant for developing nations like India. The hierarchy of prevention, reuse, recycle/treatment, and disposal in a landfill is a universally accepted approach to waste management. This approach becomes complex to practice if due considerations are given to cost, health, environment issues, and socially perceived risk in decision making. Shifting from one stage of hierarchy to another becomes an involved decision requiring an integrated approach to visualize the tradeoffs between these factors. Also, to be able to reach the best possible configuration of such waste management systems, it is necessary to consider its reappearance in future years. The present study proposes a methodology for estimating the optimum reuse span for a waste and demonstrates the same by applying the same to a personal computer. The results of the example problem clearly demonstrate the variation in optimum reuse span for different objectives/priorities. The results can help the decision makers limit the reuse of waste categories beyond a certain age.
Get full access to this article
View all available purchase options and get full access to this article.
References
Agarwal, R., Ranjan, R., and Sarkar, P. (2003). Scrapping the hi-tech myth: Computer waste in India, Toxics Link, New Delhi, India.
Ahluwalia, P. K. (2007). “Multi-objective and multi-time-step decision support model for the management of computer waste.” Ph.D. thesis, Indian Institute of Technology Delhi, New Delhi, India.
Ahluwalia, P. K., and Nema, A. K. (2007a). “A goal programming based multi-time step optimization model for integrated computer waste management.” Journal of Environmental Informatics, 10(2), 82–98.
Ahluwalia, P. K., and Nema, A. K. (2007b). “A life cycle based multi-objective optimization model for computer waste management.” Resour. Conserv. Recycl., 51(4), 792–826.
Ahluwalia, P. K., and Nema, A. K. (2009). “Evaluation of tradeoffs between cost, perceived and environmental risk associated with the management of computer waste.” Journal of Environment and Waste Management, 3(1/2), 135–163.
Arena, U., Mastellone, M. L., and Perugini, F. (2003). “The environmental performance of alternative solid waste management options: A life cycle assessment study.” Chem. Eng. J., 96(1–3), 207–222.
Barton, J. R., Dalley, D., and Patel, V. S. (1996). “Life cycle assessment for waste management.” Waste Manage., 16(1–3), 35–50.
Berger, C., Savard, G., and Wizere, A. (1999). “EUGENE: An optimization model for integrated regional solid waste management planning.” Int. J. Environ. Pollut., 12(2/3), 280–307.
Berkhout, F., and Howes, R. (1997). “The adoption of life cycle approaches by industry: Patterns and impacts.” Resour. Conserv. Recycl., 20, 71–94.
Boralkar, D. B. (2005). “Perspectives of electronic waste management.” ⟨http://mpcb.mah.nic.in/images/pdf/e_waste_pres.pdf⟩ (Sept. 22, 2005).
Craighill, A. L., and Powell, J. C. (1996). “Lifecycle assessment and economic evaluation of recycling: A case study.” Resour. Conserv. Recycl., 17, 75–96.
Denison, R. A. (1996). “Environmental life-cycle comparisons of recycling, landfilling, and incineration: A review of recent studies.” Annu. Rev. Energy Environ., 21(1), 191–237.
Ekvall, T. (1999). “Key methodological issues for life cycle inventory analysis of paper recycling.” J. Cleaner Prod., 7(4), 281–294.
EMPA. (2004). “E-waste pilot study Delhi: Knowledge partnerships with developing and transition countries.” St. Gallen7, ⟨http://www.ewaste.ch/⟩ (April 25, 2006).
Esmaili, H. (1972). “Facility selection and haul optimisation model.” J. Sanit. Engrg. Div., 98, 1005–1021.
Finnveden, G. (1999). “Methodological aspects of life cycle assessment of integrated solid waste management systems.” Resour. Conserv. Recycl., 26, 173–187.
Finnveden, G., et al. (1995). “Solid waste treatment within the framework of life-cycle assessment.” J. Cleaner Prod., 3, 189–199.
Harrison, K. W., Dumas, R. D., Solano, E., Barlaz, M. A., Brill, E. D., and Ranjithan, S. R. (2001). “Decision support for life cycle based solid waste management.” J. Comput. Civ. Eng., 15(1), 44–58.
Hu, T. -L., Sheu, J. -B., and Huang, K. -H. (2002). “A reverse logistics cost minimization model for the treatment of hazardous wastes.” Transp. Res. Part E, 38(6), 457–473.
Jennings, A. A., and Sholar, R. L. (1984). “Hazardous waste disposal network analysis.” J. Environ. Eng., 110(2), 325–342.
Kalos, M. H. (1986). Monte Carlo methods, Vol. 1: Basics, Wiley, New York.
Kaplan, P. O., Barlaz, M. A., and Ranjithan, S. R. (2004). “A procedure for life-cycle-based solid waste management with consideration of uncertainty.” J. Ind. Ecol., 8(4), 155–172.
Nema, A. K., and Gupta, S. K. (1999). “Optimization of regional hazardous waste management systems: An improved formulation.” Waste Manage., 19, 441–451.
Sjöberg, L. (1998). “World views, political attitudes and risk perception.” Risk-Health, Safety and Environment, 9, 137–152.
Solano, E., Dumas, R. D., Harrison, K. W., Ranjithan, S., Barlaz, M. A., and Brill, E. D. (2002a). “Life cycle-based solid waste management. I: Model development.” J. Environ. Eng., 128(10), 981–992.
Solano, E., Dumas, R. D., Harrison, K. W., Ranjithan, S., Barlaz, M. A., and Brill, E. D. (2002b). “Life cycle-based solid waste management. II: Illustrative applications.” J. Environ. Eng., 128(10), 993–1005.
Sudhir, V., Muraleedharan, V. R., and Srinivasan, G. (1996). “Integrated solid waste management in urban India: A critical operational research framework.” Socio-Econ. Plan. Sci., 30(3), 163–181.
Tanskanen, J. -H. (2000). “Strategic planning of municipal solid waste management.” Resour. Conserv. Recycl., 30, 111–133.
Truitt, M., Liebnman, J., and Kruse, C. (1969). “Simulation model of urban refuse collection.” J. Sanit. Engrg. Div., 95(SA2), 289–298.
Wikipedia, the free encyclopedia. (2007). “Electronic waste.” ⟨http://en.wikipedia.org/wiki/Electronic_waste⟩ (Dec. 20, 2007).
Zografos, K. G., and Davis, C. F. (1989). “Multi-objective programming approach for routing hazardous materials.” J. Transp. Eng., 115(6), 661–673.
Information & Authors
Information
Published In
Copyright
© 2010 ASCE.
History
Received: Feb 3, 2009
Accepted: Dec 9, 2009
Published online: Jun 15, 2010
Published in print: Jul 2010
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.