Impact Region of Nonbuoyant Orthogonal Discharge
Publication: Journal of Hydraulic Engineering
Volume 147, Issue 12
Abstract
The results of experimental studies into the behavior of nonbuoyant discharges impacting a solid boundary are presented. The discharges were released perpendicular to the boundary at nondimensional heights () ranging from to 36 to 173, where is the ratio of the jet discharge height above the boundary to the jet diameter. Although the primary focus was on concentration field measurements using a laser-induced fluorescence system, additional velocity field data are presented from a recent study that used a similar discharge configuration and a particle tracking velocimetry system. Integral models provided a relatively simplistic framework for quantifying and interpreting the flow behavior in the vicinity of the boundary. The new data sets enabled defining the scale of the impact region based on the ability of integral techniques to model the flow entering and leaving this region. These data sets also offered insights into the flow behavior in the impact region and provided the basis for determining the influence of the impact region on the flow behavior.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code generated or used during the study are available from the corresponding author by request, including data points used to create Figs. 6–15.
References
Beltaos, S., and N. Rajaratnam. 1974. “Impinging circular turbulent jets.” J. Hydraul. Div. 100 (10): 1313–1328. https://doi.org/10.1061/JYCEAJ.0004072.
Beltaos, S., and N. Rajaratnam. 1977. “Impingement of axisymmetric developing jets.” J. Hydraul. Res. 15 (4): 311–326. https://doi.org/10.1080/00221687709499637.
Birch, A. D., R. P. Cleaver, M. Fairweather, and G. K. Hargrave. 2005. “Velocity and concentration field measurements in a turbulent, impinging flammable jet.” Chem. Eng. Sci. 60 (1): 219–230. https://doi.org/10.1016/j.ces.2004.08.002.
Chu, V., and J. H. W. Lee. 2003. Turbulent jets and plumes: A Lagrangian approach. Kluwer Academic.
Cooper, D., D. C. Jackson, B. E. Launder, and G. X. Liao. 1993. “Impinging jet studies for turbulence model assessment—I. Flow-field experiments.” Int. J. Heat Mass Transfer 36 (10): 2675–2684. https://doi.org/10.1016/S0017-9310(05)80204-2.
Crowe, A. 2013. “Inclined negatively buoyant jets and boundary interaction.” Dissertation/thesis, Dept. of Civil and Natural Resources Engineering, Univ. of Canterbury.
Davidson, M. J., and C. J. Oliver. 2012. “Desalination and the environment.” In Handbook of environmental fluid mechanics, Vol 2: Systems, pollution, modeling, and measurements, edited by H. J. Fernando, 41–54. Boca Raton, FL: CRC Press, Taylor & Francis.
Didden, N., and C.-M. Ho. 1985. “Unsteady separation in a boundary layer produced by an impinging jet.” J. Fluid Mech. 160 (Nov): 235–256. https://doi.org/10.1017/S0022112085003469.
Fairweather, M., and G. Hargrave. 2002a. “Experimental investigation of an axisymmetric, impinging turbulent jet. 1. Velocity field.” Exp. Fluids 33 (3): 464–471. https://doi.org/10.1007/s00348-002-0479-7.
Fairweather, M., and G. Hargrave. 2002b. “Experimental investigation of an axisymmetric, impinging turbulent jet. 2. Scalar field.” Exp. Fluids 33 (4): 539–544.
Fischer, H. B. 1979. Mixing in inland and coastal waters. New York: Academic Press.
Ghaneeizad, S. M., J. F. Atkinson, and S. J. Bennett. 2015. “Effect of flow confinement on the hydrodynamics of circular impinging jets: Implications for erosion assessment.” Environ. Fluid Mech. 15 (1): 1–25. https://doi.org/10.1007/s10652-014-9354-3.
Guillard, F., R. Fritzon, J. Revstedt, C. Trägårdh, M. Aldén, and L. Fuchs. 1998. “Mixing in a confined turbulent impinging jet using planar laser-induced fluorescence.” Exp. Fluids 25 (2): 143–150. https://doi.org/10.1007/s003480050218.
Jirka, G. H. 2004. “Integral model for turbulent buoyant jets in unbounded stratified flows. Part I: Single round jet.” Environ. Fluid Mech. 4 (1): 1–56. https://doi.org/10.1023/A:1025583110842.
Kikkert, G. A. 2006. “Buoyant jets with two and three-dimensional trajectories.” Ph.D. thesis, Dept. of Civil and Natural Resources Engineering, Univ. of Canterbury.
Knowles, K., and M. Myszko. 1998. “Turbulence measurements in radial wall-jets.” Exp. Therm. Fluid Sci. 17 (1–2): 71–78. https://doi.org/10.1016/S0894-1777(97)10051-6.
Koched, A., M. Pavageau, and F. Aloui. 2011. “Experimental investigations of transfer phenomena in a confined plane turbulent impinging water jet.” J. Fluids Eng. 133 (6): 061204. https://doi.org/10.1115/1.4004090.
Law, A. W.-K., and Herlina. 2002. “An experimental study on turbulent circular wall jets.” J. Hydraul. Eng. 128 (2): 161–174. https://doi.org/10.1061/(ASCE)0733-9429(2002)128:2(161).
MacLatchy, M. R. 1993. “Radial spreading of vertical buoyant jets in shallow water.” Ph.D. dissertation, Dept. of Civil Engineering, Univ. of British Columbia.
Maurel, S., and C. Solliec. 2001. “A turbulent plane jet impinging nearby and far from a flat plate.” Exp. Fluids 31 (6): 687–696. https://doi.org/10.1007/s003480100327.
Oliver, C. J. 2012. “Near field mixing of negatively buoyant jets.” Ph.D. thesis, Dept. of Civil and Natural Resources Engineering, Univ. of Canterbury.
Oliver, C. J., M. J. Davidson, and R. I. Nokes. 2013. “Removing the boundary influence on negatively buoyant jets.” Environ. Fluid Mech. 13 (6): 625–648. https://doi.org/10.1007/s10652-013-9278-3.
Poreh, M., Y. G. Tsuei, and J. E. Cermak. 1967. “Investigation of a turbulent radial wall jet.” J. Appl. Mech. 34 (2): 457–463. https://doi.org/10.1115/1.3607705.
Rajaratnam, N. 1976. In Vol. 5 of Turbulent jets. Amsterdam, Netherlands: Elsevier.
Rajaratnam, N., and K. A. Mazurek. 2005. “Impingement of circular turbulent jets on rough boundaries.” J. Hydraul. Res. 43 (6): 689–695. https://doi.org/10.1080/00221680509500388.
Rajaratnam, N., D. Z. Zhu, and S. P. Rai. 2010. “Turbulence measurements in the impinging region of a circular jet.” Can. J. Civ. Eng. 37 (5): 782–786. https://doi.org/10.1139/L10-014.
Ramakanth, A. 2016. “Quantifying boundary interaction of negatively buoyant jets.” Dissertation/thesis, Dept. of Civil and Natural Resources Engineering, Univ. of Canterbury.
Tani, I., and Y. Komatsu. 1966. “Impingement of a round jet on a flat surface.” In Applied mechanics, edited by H. Görtler, 672–676. Berlin: Springer.
Ulasir, M. 2001. “Experimental and numerical study of round, submerged buoyant jets impinging on a horizontal surface.” Ph.D. thesis, Dept. of Civil and Environmental Engineering, Univ. of Michigan.
Wang, H., and A. Law. 2002. “Second-order integral model for a round turbulent buoyant jet.” J. Fluid Mech. 459: 397–428. https://doi.org/10.1017/S0022112002008157.
Information & Authors
Information
Published In
Copyright
© 2021 American Society of Civil Engineers.
History
Received: Jul 9, 2019
Accepted: Jun 7, 2021
Published online: Oct 4, 2021
Published in print: Dec 1, 2021
Discussion open until: Mar 4, 2022
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.