Ranging of Turbulent Water Surfaces Using a Laser Triangulation Principle in a Laboratory Environment
Publication: Journal of Hydraulic Engineering
Volume 146, Issue 8
Abstract
A measuring system based on laser triangulation for ranging a turbulent water surface in a laboratory environment is presented in this paper. The system is composed of a light detection and ranging (LIDAR) device, serving as a light source, and a high-speed camera. Single-point illumination was chosen to facilitate the introduction of the epipolar line in the image-processing step and thus improve the distinction between primary and other reflections, which increase the uncertainty of the measurement and introduce noise. The system was used to measure the water surface in an open channel confluence, which is composed of main and tributary channels, which join at a 90° angle. The surface was measured for 2.01 s, resulting in 54,682 points measured in 543 profiles. The influence of image process parameters (height and width of filtering kernel and width of area surrounding the epipolar line) on smooth and rough water surface was studied. The results show that the parameters’ influence is at least an order of magnitude smaller than the amplitude of water surface fluctuation.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code generated or used during the study are available from the corresponding author by request. These data include high-speed camera video, and code for image processing and surface reconstruction.
Acknowledgments
We thank the Research agency of Slovenia ARRS for the support of this research through programs P2-0167, P2-0180, and P2-0270.
References
Allis, M. J., W. L. Peirson, and M. L. Banner. 2011. “Application of LIDAR as a measurement tool for waves.” In Proc., 21st Int. Offshore Polar Engineering Conf., 19–24. Maui, HI: International Society of Offshore and Polar Engineers.
Amann, M. C., T. Bosch, M. Lescure, R. Myllylä, and M. Rioux. 2001. “Laser raging: A critical review of usual techniques for distance measurement.” Opt. Eng. 40 (1): 10–19.
Blenkingsopp, C. E., M. A. Mole, I. L. Turner, and W. L. Peirson. 2010. “Measurements of the time-varying free-surface profile across the swash zone obtained using an industrial LIDAR.” Coast. Eng. 57 (11–12): 1059–1065.
Blenkingsopp, C. E., I. L. Turner, M. J. Allis, W. L. Peirson, and L. E. Garder. 2012. “Application of LiDAR technology for measurement of time-varying free-surface profiles in a laboratory wave flume.” Coast. Eng. 68 (Oct): 1–5.
Bung, D. B. 2013. “Non-intrusive detection of air–water surface roughness in self-aerated chute flows.” J. Hydraul. Res. 51 (3): 322–329. https://doi.org/10.1080/00221686.2013.777373.
Bung, D. B., and D. Valero. 2016. “Optical flow estimation in aerated flows.” J. Hydraul. Res. 54 (5): 575–580. https://doi.org/10.1080/00221686.2016.1173600.
Chanson, H. 2013. “Hydraulics of aerated flows: Qui pro quo?” J. Hydraul. Res. 51 (3): 223–243. https://doi.org/10.1080/00221686.2013.795917.
Chanson, H., and T. Brattberg. 2000. “Experimental study of the air–water shear flow in a hydraulic jump.” Int. J. Multiphase Flow 26 (4): 583–607. https://doi.org/10.1016/S0301-9322(99)00016-6.
Felder, S., and H. Chanson. 2018. “Air–water flow patterns of hydraulic jumps on uniform beds macroroughness.” J. Hydraul. Eng. 144 (3): 04017068. https://doi.org/10.1061/(ASCE)HY.1943-7900.0001402.
Forsyth, D., and J. Ponce. 2003. Computer vision: A modern approach. Englewood Cliffs, NJ: Prentice-Hall.
Jain, R., R. Kasturi, and B. G. Schunck. 1995. “Machine vision.” In McGraw-Hill series in computer science. New York: McGraw-Hill.
Kramer, M., H. Chanson, and S. Felder. 2020. “Can we improve the non-intrusive characterization of high-velocity air–water flows? Application of LIDAR technology to stepped spillways.” J. Hydraul. Res. 58 (2): 1–13.
Mignot, E., N. Riviere, R. Perkins, and A. Paquier. 2008. “Flow patterns in a four-batch junction with supercritical flow.” J. Hydraul. Eng. 134 (6): 701–713. https://doi.org/10.1061/(ASCE)0733-9429(2008)134:6(701).
Montano, L., L. Rui, and S. Felder. 2018. “Continuous measurements of time-varying free-surface profiles in aerated hydraulic jumps with a LIDAR.” Exp. Therm Fluid Sci. 93 (May): 379–397. https://doi.org/10.1016/j.expthermflusci.2018.01.016.
Mouaze, D., F. Murzyn, and J. R. Chaplin. 2005. “Free surface length scale estimation in hydraulic jumps.” J. Fluids Eng. 127 (6: 1191–1193. https://doi.org/10.1115/1.2060736.
Mulsow, C., H. G. Mass, P. Westfeld, and M. Schulze. 2008. “Triangulation methods for height profile measurements on instationary water surfaces” J. Appl. Geod. 2 (1): 21–29. https://doi.org/10.1515/JAG.2008.003.
Mulsow, C., M. Schulze, and P. Westfeld. 2006. “An optical triangulation method for height measurements on non-stationary water surfaces.” Int. Arch. Photogramm. Remote Sens. Inf. Sci. 36 (5): 2013–2017.
Pfister, M., and C. Gisonni. 2014. “Head losses in junction manholes for free surface flows in circular conduits.” J. Hydraul. Eng. 140 (9): 06014015.
Rak, G., M. Hočevar, and F. Steinman. 2017. “Measuring water surface topography using laser scanning.” Flow Meas. Instrum. 56 (Aug): 35–44. https://doi.org/10.1016/j.flowmeasinst.2017.07.004.
Rak, G., M. Hočevar, and F. Steinman. 2018. “Construction of water surface topography using LIDAR data.” Strojniski Vestnik/J. Mech. Eng. 64 (9): 555–565.
Rak, G., F. Steinman, M. Hočevar, M. Dular, M. Jezeršek, and U. Pavlovčič. 2020. “Laser ranging measurements of turbulent water surfaces.” Eur. J. Mech. B-Fluid. 81 (9): 555–565.165–172.
Teng, P., and J. Yang. 2018. “Modeling and prototype testing of flows over flip-bucket aerators.” J. Hydraul. Eng. 144 (12): 04018069. https://doi.org/10.1061/(ASCE)HY.1943-7900.0001531.
Westfeld, P., H. G. Maasa, K. Richter, and R. Weiß. 2017. “Analysis and correction of ocean wave pattern induced systematic coordinate errors in airborne LiDAR bathymetry.” ISPRS J. Photogramm. Remote Sens. 128 (Jun): 314–325. https://doi.org/10.1016/j.isprsjprs.2017.04.008.
Zhang, G., D. Valero, D. B. Bung, and H. Chanson. 2018. “On the estimation of free-surface turbulence using ultrasonic sensors.” Flow Meas. Instrum. 60 (Apr): 171–184. https://doi.org/10.1016/j.flowmeasinst.2018.02.009.
Zhang, S. 2013. Handbook of 3D machine vision: Optical metrology and imaging. 1st ed. Boca Raton, FL: CRC Press.
Information & Authors
Information
Published In
Copyright
©2020 American Society of Civil Engineers.
History
Received: Jun 14, 2019
Accepted: Feb 6, 2020
Published online: May 20, 2020
Published in print: Aug 1, 2020
Discussion open until: Oct 20, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.