Structural Changes of Mobile Gravel Bed Surface for Increasing Flow Intensity
Publication: Journal of Hydraulic Engineering
Volume 146, Issue 2
Abstract
The structure of a mobile bed in a laboratory channel composed of sand and gravel () was characterized over a series of experiments with steady flows from a low flow, where only the finer fractions of the bed material were in motion to flows in which most bed material grain sizes were in motion. In each experiment, sediment transport rates were observed to initially be greater than the long-term mean rates, and fluctuations in transport rate decreased in period as bed shear stresses were increased. The bed surface median grain size increased with bed shear stress, while the sand fraction of the bed material organized into longitudinally extended corridors, which persisted as flow and transport rates were increased. The presence of the sand corridors was reflected by changes in the probability density function of the bed-surface elevation standard deviation evaluated at the grain-scale. The formation and organization of these corridors may have a strong influence on sand and gravel transport in channels with mixed sand and gravel bed material.
Get full access to this article
View all available purchase options and get full access to this article.
References
Aberle, J., and V. Nikora. 2006. “Statistical properties of armored gravel bed surfaces.” Water Resour. Res. 42 (11): W11414. https://doi.org/10.1029/2005WR004674.
Bertin, S., and H. Friedrich. 2018. “Effect of surface texture and structure on the development of stable fluvial armors.” Geomorphology 306 (Apr): 64–79. https://doi.org/10.1016/j.geomorph.2018.01.013.
Bertin, S., J. Groom, and H. Friedrich. 2017. “Isolating roughness scales of gravel-bed particles.” Water Resour. Res. 53 (8): 6841–6856. https://doi.org/10.1002/2016WR020205.
Curran, J. C., and K. Waters. 2014. “The importance of bed sediment sand content for the structure of a static armor layer in a gravel-bed river.” J. Geophys. Res. Earth Surf. 119 (7): 1484–1497. https://doi.org/10.1002/2014JF003143.
Diplas, P., C. L. Dancey, A. O. Celik, M. Valyrakis, K. Greer, and T. Akar. 2008. “The role of impulse on the initiation of particle movement under turbulent flow conditions.” Science 322 (5902): 717–720. https://doi.org/10.1126/science.1158954.
Diplas, P., and A. J. Sutherland. 1988. “Sampling techniques for gravel sized sediment.” J. Hydraul. Eng. 114 (5): 484–501. https://doi.org/10.1061/(ASCE)0733-9429(1988)114:5(484).
Garcia, M. H. 2008. “Sedimentation transport and morphodynamics.” In Sedimentation engineering, processes, measurements, modeling, and practice, edited by M. H. Garcia, 21–163. Reston, VA: ASCE.
Hinton, D., R. H. Hotchkiss, and M. Cope. 2018. “Comparison of calibrated empirical and semi-empirical methods for bedload transport rate prediction in gravel bed streams” J. Hydraul. Eng. 144 (7): 04018038. https://doi.org/10.1061/(ASCE)HY.1943-7900.0001474.
Hodge, R., J. Brasington, and K. Richards. 2009. “Analysing laser-scanned digital terrain models of gravel bed surfaces: Linking morphology to sediment transport processes and hydraulics.” Sedimentology 56 (7): 2024–2043. https://doi.org/10.1111/j.1365-3091.2009.01068.x.
Hubbell, D. W., and H. H. Stevens. 1986. “Factors affecting accuracy of bedload sampling.” In Proc., 4th Federal Interagency Sedimentation Conf. Washington, DC: Subcommittee on Sedimentation of the Interagency Advisory Committee on Water Data.
Kellerhals, R., and D. I. Bray. 1971. “Sampling procedures for coarse fluvial sediments.” J. Hydraul. Div. 97 (HY8): 1165–1180.
Kirchner, J. W., W. E. Dietrich, F. Iseya, and H. Ikeda. 1990. “The variability of critical shear stress, friction angle, and grain protrusion in water-worked sediments.” Sedimentology 37 (4): 647–672. https://doi.org/10.1111/j.1365-3091.1990.tb00627.x.
Kuhnle, R. A., D. G. Wren, E. J. Langendoen, and J. R. Rigby. 2013. “Sand transport over an immobile gravel substrate.” J. Hydraul. Eng. 139 (2): 167–176. https://doi.org/10.1061/(ASCE)HY.1943-7900.0000615.
Lisle, T. E. 1995. “Particle size variations between bed load and bed material in natural gravel bed channel.” Water Resour. Res. 31 (4): 1107–1118. https://doi.org/10.1029/94WR02526.
Mao, L. 2012. “The effect of hydrographs on bed load transport and bed sediment spatial arrangement.” J. Geophys. Res. 117 (F3): F03024. https://doi.org/10.1029/2012JF002428.
Mao, L. 2018. “The effects of flood history on sediment transport in gravel-bed rivers.” Geomorphology 322 (Dec): 196–205. https://doi.org/10.1016/j.geomorph.2018.08.046.
Mao, L., J. R. Cooper, and L. E. Frostick. 2011. “Grain size and topographical differences between static and mobile armour layers.” Earth Surf. Processes Landforms 36 (10): 1321–1334. https://doi.org/10.1002/esp.2156.
Marion, A., S. J. Tait, and J. K. McEwan. 2003. “Analysis of small-scale gravel bed topography during armoring.” Water Resour. Res. 30 (12): 1334. https://doi.org/10.1029/2003WR002367.
Nikora, V. I., D. G. Goring, and B. J. F. Biggs. 1998. “On gravel-bed roughness characterization.” Water Resour. Res. 34 (3): 517–527. https://doi.org/10.1029/97WR02886.
Ockelford, A. M., and H. Haynes. 2013. “The impact of stress history on bed structure.” Earth Surf. Processes Landforms 38 (7): 717–727. https://doi.org/10.1002/esp.3348.
Papanicolaou, A. N., A. G. Tsakiris, M. A. Wyssmann, and C. M. Kramer. 2018. “Boulder array effects on bedload pulses and depositional patches.” J. Geophys. Res. Earth Surf. 123 (11): 2925–2953. https://doi.org/10.1029/2018JF004753.
Parker, G. 1990. “Surface-based bedload transport relation for gravel rivers.” J. Hydraul. Res. 28 (4): 417–436. https://doi.org/10.1080/00221689009499058.
Parker, G., and P. C. Klingeman. 1982. “On why gravel bed streams are paved.” Water Resour. Res. 18 (5): 1409–1423. https://doi.org/10.1029/WR018i005p01409.
Powell, D. M., A. Ockelford, S. P. Rice, J. K. Hillier, T. Nguyen, I. Reid, N. J. Tate, and D. Ackerley. 2016. “Structural properties of mobile armors at different flow strengths in gravel-bed rivers.” J. Geophys. Res. Earth Surf. 121 (8): 1494–1515. https://doi.org/10.1002/2015JF003794.
Qin, J., J. Aberle, P. Y. Henry, T. Wu, and D. Zhong. 2019. “Statistical significance of spatial correlation patterns in armoured gravel beds.” J. Hydraul. Res. 57 (1): 90–106. https://doi.org/10.1080/00221686.2018.1459894.
Recking, A. 2010. “A comparison between flume and field bed load transport data and consequences for surface-based bed load transport prediction.” Water Resour. Res. 46 (3): W03518. https://doi.org/10.1029/2009WR008007.
Recking, A. 2013. “Simple method for calculating reach-averaged bed-load transport.” J. Hydraul. Eng. 139 (1): 70–75. https://doi.org/10.1061/(ASCE)HY.1943-7900.0000653.
Vanoni, V. A., and N. H. Brooks. 1957. “Laboratory studies of the roughness and suspended load of alluvial streams.” In California Institute of Technology sedimentation laboratory, 121. Omaha, NE: US Army Engineer Division.
Wilcock, P. R., and J. C. Crowe. 2003. “A surface-based transport model for sand and gravel.” J. Hydraul. Eng. 129 (2): 120–128. https://doi.org/10.1061/(ASCE)0733-9429(2003)129:2(120).
Wilcock, P. R., S. T. Kenworthy, and J. C. Crowe. 2001. “Experimental study of the transport of mixed sand and gravel.” Water Resour. Res. 37 (12): 3349–3358. https://doi.org/10.1029/2001WR000683.
Wren, D. G., R. A. Kuhnle, E. J. Langendoen, and J. R. Rigby. 2014. “Turbulent flow and sand transport over a cobble bed in a laboratory flume.” J. Hydraul. Eng. 140 (4): 04014001. https://doi.org/10.1061/(ASCE)HY.1943-7900.0000838.
Wu, W., S. S. Y. Wang, and Y. Jia. 2000. “Nonuniform sediment transport in alluvial rivers.” J. Hydraul. Res. 38 (6): 427–434. https://doi.org/10.1080/00221680009498296.
Information & Authors
Information
Published In
Copyright
©2019 American Society of Civil Engineers.
History
Received: Nov 2, 2018
Accepted: Aug 2, 2019
Published online: Dec 13, 2019
Published in print: Feb 1, 2020
Discussion open until: May 13, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.