Energy-Based Evaluation of 1D Unsteady Friction Models for Classic Laminar Water Hammer with Comparison to CFD
Publication: Journal of Hydraulic Engineering
Volume 146, Issue 3
Abstract
Under the umbrella of one-dimensional (1D) transient flow analysis, unsteady friction models are popular tools to better represent the decay in pressure signal associated with high wall shear stresses. There are generally two families of unsteady friction models, namely those based on instantaneous acceleration (IAB) and those based on convolution (CB). This paper considers a classic laminar water hammer and compares two unsteady friction models with both experimental results and those obtained using a high-resolution computation fluid dynamics (CFD) model, with CFD having a more native representation of frictional losses. Because dissipation is fundamentally an energetic phenomenon, an integrated total energy (ITE) approach is used here as a lens to view and compare results. The capabilities and limitations of the ITE approach are discussed. More specifically, the ITE method is used not only to quantify dissipation but also to spatially resolve when, where, and how energy is dissipated in each model. Most notably, CFD and CB models are found to differ significantly for positive flows, with CFD results exhibiting little difference between positive and zero flows.
Get full access to this article
View all available purchase options and get full access to this article.
References
Bergant, A., A. R. Simpson, and J. Vìtkovský. 2001. “Developments in unsteady pipe flow friction modelling.” J. Hydraul. Res. 39 (3): 249–257. https://doi.org/10.1080/00221680109499828.
Brunone, B., and U. Golia. 2008. “Discussion of ‘Systematic evaluation of one-dimensional unsteady friction models in simple pipelines’ by J. P. Vitkovsky, A. Bergant, A. R. Simpson and M. F. Lambert.” J. Hydraul. Eng. 134 (2): 282–284. https://doi.org/10.1061/(ASCE)0733-9429(2008)134:2(282).
Brunone, B., U. M. Golia, and M. Greco. 1991. “Some remarks on the momentum equation for fast transients.” In Proc., Int. Conf. on Hydr. Transients with Water Column Separation, 273–280. Valencia, Spain: International Association for Hydro-Environment Engineering and Research.
Brunone, B., and L. Morelli. 1999. “Automatic control valve induced transients in operative pipe system.” J. Hydraul. Eng. 125 (5): 534–542. https://doi.org/10.1061/(ASCE)0733-9429(1999)125:5(534).
Comolet, R. 1976. Mécanique Expérimentale des Fluides, Tome II: Dynamique des Fluides Réels. Paris: Masson.
Daily, J., W. Hankey Jr., R. Olive, and J. Jordaan Jr. 1956. “Resistance coefficients for accelerated and decelerated flows through smooth tubes and orifices.” Trans. ASME 78: 17.
Duan, H. F., S. Meniconi, P. J. Lee, B. Brunone, and M. S. Ghidaoui. 2017. “Local and integral energy-based evaluation for the unsteady friction relevance in transient pipe flows.” J. Hydraul. Eng. 143 (7): 04017015. https://doi.org/10.1061/(ASCE)HY.1943-7900.0001304.
Ferziger, J., and M. Peric. 2002. Computational methods for fluid dynamics. 3rd ed. New York: Springer.
Ghidaoui, M. S., and S. Mansour. 2002. “Efficient treatment of the Vardy-Brown unsteady shear in pipe transients.” J. Hydraul. Eng. 128 (1): 102–112. https://doi.org/10.1061/(ASCE)0733-9429(2002)128:1(102).
Ghidaoui, M. S., M. Zhao, D. A. McInnis, and D. H. Axworthy. 2005. “A review of water hammer theory and practice.” Appl. Mech. Rev. 58 (1): 49–76. https://doi.org/10.1115/1.1828050.
Karney, B. W. 1990. “Energy relations in transient closed conduit flow.” J. Hydraul. Eng. 116 (10): 1180–1196. https://doi.org/10.1061/(ASCE)0733-9429(1990)116:10(1180).
Karney, B. W., and D. McInnis. 1992. “Efficient calculation of transient flow in simple pipe networks.” J. Hydraul. Eng. 118 (7): 1014–1030. https://doi.org/10.1061/(ASCE)0733-9429(1992)118:7(1014).
Mandair, S., B. Karney, R. Magnan, and J.-F. Morissette. 2018. “Comparing CFD and 1-D solvers for the classic laminar water-hammer event in a pipe-reservoir system, perspectives on energy transformations and wave reflection.” In Vol. 1 of Pressure surges, edited by A. S. Tijsseling, 471–486. Cranfield, UK: BHR Group.
Martins, N. M. C., B. Brunone, S. Meniconi, H. M. Ramos, and D. I. C. Covas. 2017. “Efficient computational fluid dynamics model for transient laminar flow modeling: Pressure wave propagation and velocity profile changes.” J. Fluids Eng. 140 (1): 011102. https://doi.org/10.1115/1.4037504.
Martins, N. M. C., N. J. G. Carriço, H. M. Ramos, and D. I. Covas. 2014. “Velocity-distribution in pressurized pipe flow using CFD: Accuracy and mesh analysis.” Comput. Fluids 105 (Dec): 218–230. https://doi.org/10.1016/j.compfluid.2014.09.031.
Martins, N. M. C., A. K. Soares, H. M. Ramos, and D. I. C. Covas. 2016. “CFD modeling of transient flow in pressurized pipes.” Comput. Fluids 126 (Mar): 129–140. https://doi.org/10.1016/j.compfluid.2015.12.002.
Pezzinga, G. 2000. “Evaluation of unsteady flow resistances by quasi-2D or 1D models.” J. Hydraul. Eng. 126 (10): 778–785. https://doi.org/10.1061/(ASCE)0733-9429(2000)126:10(778).
SAS IP. n.d. “CFX-solver modeling guide.” Accessed December 15, 2018. https://www.sharcnet.ca/Software/Ansys/17.0/en-us/help/cfx_mod/cfx_mod.html.
Suzuki, K., T. Taketomi, and S. Sato. 1991. “Improving Zielke’s method of simulating frequency-dependent friction in laminar liquid pipe flow.” J. Fluids Eng. 113 (4): 569–573. https://doi.org/10.1115/1.2926516.
Trikha, A. 1975. “An efficient method for simulation frequency-dependent friction in transient liquid flow.” J. Fluids Eng. 97 (1): 97–105. https://doi.org/10.1115/1.3447224.
Urbanowicz, K. 2017. “Analytical expressions for effective weighting functions used during simulations of water hammer.” J. Theor. Appl. Mech. 55 (3): 1029–1040. https://doi.org/10.15632/jtam-pl.55.3.1029.
Vardy, A. 2018. “Acceleration-dependent unsteady friction revisited.” In Vol. 1 of Proc., 13th Int. Conf. on Pressure Surges, edited by A. S. Tijsseling, 265–281. Cranfield, UK: BHR Group.
Vardy, A., and J. Brown. 2004. “Efficient approximation of unsteady friction weighting functions.” J. Hydraul. Eng. 130 (11): 1097–1107. https://doi.org/10.1061/(ASCE)0733-9429(2004)130:11(1097).
Vítkovský, J. P., A. Bergant, A. R. Simpson, and M. F. Lambert. 2006. “Systematic evaluation of one-dimensional unsteady friction models in simple pipelines.” J. Hydraul. Eng. 132 (7): 696–708. https://doi.org/10.1061/(ASCE)0733-9429(2006)132:7(696).
White, F. M. 2003. Fluid mechanics. New York: McGraw-Hill.
Wylie, B. E., and V. L. Streeter. 1978. Fluid transients. New York: McGraw-Hill.
Zielke, W. 1969. “Frequency-dependent friction in transient pipe flow.” J. Basic Eng. 91 (4): 671–677. https://doi.org/10.1115/1.3571208.
Information & Authors
Information
Published In
Copyright
©2019 American Society of Civil Engineers.
History
Received: Jan 30, 2019
Accepted: Aug 2, 2019
Published online: Dec 27, 2019
Published in print: Mar 1, 2020
Discussion open until: May 27, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.