Jet-Flipping in Scour Hole Downstream of Unsubmerged Weir with Apron
Publication: Journal of Hydraulic Engineering
Volume 145, Issue 10
Abstract
An apron downstream of an unsubmerged weir can cause the main jet to flip up and down cyclically in a local scour hole, significantly influencing the scouring process. This behavior was experimentally investigated using particle image velocimetry (PIV). The flow inside the scour hole is characterized by the presence of coherent structures (i.e., four different types of roller), and the flipping behavior is linked with the cyclical appearance and disappearance of a bed roller beneath the main jet. With the cyclical jet-flipping, the main jet has a pivotal region with significant average kinetic energy (AKE) immediately downstream of the apron, and the turbulence kinetic energy (TKE) distributions attain their peak values around this region. The jet development also exhibited self-similarity along the streamline passing through the peak AKE when scaled by the local length and velocity scales. Compared with the no-apron case, the apron reduced the maximum scour depth by dissipating the jet energy and decreasing the impingement angles of the jet to the bed profile and the water surface.
Get full access to this article
View all available purchase options and get full access to this article.
References
Adduce, C., and M. La Rocca. 2006. “Local scouring due to turbulent water jets downstream of a trapezoidal drop: Laboratory experiments and stability analysis.” Water Resour. Res. 42 (2). https://doi.org/10.1029/2005WR004139.
Albertson, M. L., Y. Dai, R. Jensen, and H. Rouse. 1950. “Diffusion of submerged jets.” Trans. Am. Soc. Civ. Eng. 115 (1): 639–664.
Azimi, A. H., N. Rajaratnam, and D. Z. Zhu. 2014. “Submerged flows over rectangular weirs of finite crest length.” J. Irrig. Drain. Eng. 140 (5): 06014001. https://doi.org/10.1061/(ASCE)IR.1943-4774.0000728.
Balachandar, R., and J. A. Kells. 1997. “Local channel scour in uniformly graded sediments: The time-scale problem.” Can. J. Civ. Eng. 24 (5): 799–807. https://doi.org/10.1139/l97-034.
Balachandar, R., and J. A. Kells. 1998. “Instantaneous water surface and bed scour profiles using video image analysis.” Can. J. Civ. Eng. 25 (4): 662–667. https://doi.org/10.1139/l98-003.
Balachandar, R., and H. P. Reddy. 2013. Scour caused by wall jets. London: InTech Open Access Publisher.
Beltaos, S. 1976a. “Oblique impingement of circular turbulent jets.” J. Hydraul. Res. 14 (1): 17–36. https://doi.org/10.1080/00221687609499685.
Beltaos, S. 1976b. “Oblique impingement of plane turbulent jets.” J. Hydraul. Eng. Div. 102 (9): 1177–1192.
Beltaos, S., and N. Rajaratnam. 1973. “Plane turbulent impinging jets.” J. Hydraul. Res. 11 (1): 29–59. https://doi.org/10.1080/00221687309499789.
Bennett, S. J., and C. V. Alonso. 2005. “Kinematics of flow within headcut scour holes on hillslopes.” Water Resour. Res. 41 (9). https://doi.org/10.1029/2004WR003752.
Bennett, S. J., C. V. Alonso, S. N. Prasad, and M. J. M. Römkens. 2000. “Experiments on headcut growth and migration in concentrated flows typical of upland areas.” Water Resour. Res. 36 (7): 1911–1922. https://doi.org/10.1029/2000WR900067.
Bey, A., M. A. A. Faruque, and R. Balachandar. 2007. “Two-dimensional scour hole problem: Role of fluid structures.” J. Hydraul. Eng. 133 (4): 414–430. https://doi.org/10.1061/(ASCE)0733-9429(2007)133:4(414).
Boillot, A., and A. K. Prasad. 1996. “Optimization procedure for pulse separation in cross-correlation PIV.” Exp. Fluids 21 (2): 87–93. https://doi.org/10.1007/BF00193911.
Bormann, N. E., and P. Y. Julien. 1991. “Scour downstream of grade-control structures.” J. Hydraul. Eng. 117 (5): 579–594. https://doi.org/10.1061/(ASCE)0733-9429(1991)117:5(579).
Dey, S., and R. V. Raikar. 2007. “Scour below a high vertical drop.” J. Hydraul. Eng. 133 (5): 564–568. https://doi.org/10.1061/(ASCE)0733-9429(2007)133:5(564).
Fang, S. 2010. “Bed erosion below overflowing weir with an apron.” In Bachelor final year project. Singapore: Nanyang Technological Univ.
Fritz, H. M., and W. H. Hager. 1998. “Hydraulics of embankment weirs.” J. Hydraul. Eng. 124 (9): 963–971. https://doi.org/10.1061/(ASCE)0733-9429(1998)124:9(963).
Guan, D., B. W. Melville, and H. Friedrich. 2014. “Flow patterns and turbulence structures in a scour hole downstream of a submerged weir.” J. Hydraul. Eng. 140 (1): 68–76. https://doi.org/10.1061/(ASCE)HY.1943-7900.0000803.
Hill, D. F., and B. D. Younkin. 2006. “PIV measurements of flow in and around scour holes.” Exp. Fluids 41 (2): 295–307. https://doi.org/10.1007/s00348-006-0156-3.
Hoffmans, G. J. C. M. 1998. “Jet scour in equilibrium phase.” J. Hydraul. Eng. 124 (4): 430–437. https://doi.org/10.1061/(ASCE)0733-9429(1998)124:4(430).
Hoffmans, G. J. C. M., and R. Booij. 1993. “Two-dimensional mathematical modelling of local-scour holes.” J. Hydraul. Res. 31 (5): 615–634. https://doi.org/10.1080/00221689309498775.
Hoffmans, G. J. C. M., and H. J. Verheij. 1997. Scour manual. Rotterdam, Netherlands: A.A. Balkema.
Hopfinger, E., A. Kurniawan, W. Graf, and U. Lemmin. 2004. “Sediment erosion by Görtler vortices: The scour-hole problem.” J. Fluid Mech. 520: 327–342. https://doi.org/10.1017/S0022112004001636.
Jalil, A., and N. Rajaratnam. 2010. “Oblique impingement of circular water jets on a plane boundary.” J. Hydraul. Res. 44 (6): 807–814. https://doi.org/10.1080/00221686.2006.9521731.
Jia, Y., T. Kitamura, and S. S. Y. Wang. 2001. “Simulation of scour process in plunging pool of loose bed-material.” J. Hydraul. Eng. 127 (3): 219–229. https://doi.org/10.1061/(ASCE)0733-9429(2001)127:3(219).
Johnston, A. J. 1990. “Scour hole developments in shallow tailwater.” J. Hydraul. Res. 28 (3): 341–354. https://doi.org/10.1080/00221689009499074.
Johnston, A. J., and A. R. Halliwell. 1986. “Jet behavior in shallow receiving water.” Proc. Inst. Civ. Eng., Part 2 Res. Theory 81 (4): 549–568. https://doi.org/10.1680/iicep.1986.461.
Kabiri-Samani, A., A. Ansari, and S. M. Borghei. 2010. “Hydraulic behaviour of flow over an oblique weir.” J. Hydraul. Res. 48 (5): 669–673. https://doi.org/10.1080/00221686.2010.507358.
Kamoi, A., and H. Tanaka. 1972. “Measurements of wall shear stress, wall pressure and fluctuations in the stagnation region produced by oblique jet impingement.” In Proc., Conf. on Fluid Dynamic Measurements in the Industrial and Medical Environment, 217–227. Leicester, UK: Leicester University Press.
Karim, O. A., and K. Ali. 2000. “Prediction of flow patterns in local scour holes caused by turbulent water jets.” J. Hydraul. Res. 38 (4): 279–287. https://doi.org/10.1080/00221680009498327.
Kurniawan, A., and M. S. Altinakar. 2002. “Velocity and turbulence measurements in a scour hole using an acoustic doppler velocity profiler.” In Proc., 3rd Int. Symp. on Ultrasonic Doppler Methods for Fluid Mechanics and Fluid Engineering, 37–43. Villigen, Switzerland: Paul Scherrer Institute.
Lin, C., S. C. Hsieh, K. J. Kuo, and K. A. Chang. 2008. “Periodic oscillation caused by a flow over a vertical drop pool.” J. Hydraul. Eng. 134 (7): 948–960. https://doi.org/10.1061/(ASCE)0733-9429(2008)134:7(948).
Lin, C., W. Y. Hwung, S. C. Hsieh, and K. A. Chang. 2007. “Experimental study on mean velocity characteristics of flow over vertical drop.” J. Hydraul. Res. 45 (1): 33–42. https://doi.org/10.1080/00221686.2007.9521741.
Liu, P. Q., J. R. Dong, and C. Yu. 1998a. “Experimental investigation of fluctuation uplift on rock blocks at the bottom of the scour pool downstream of Three-Gorges spillway.” J. Hydraul. Res. 36 (1): 55–68. https://doi.org/10.1080/00221689809498377.
Liu, P. Q., J. Z. Gao, and Y. M. Li. 1998b. “Experimental investigation of submerged impinging jets in a plunge pool downstream of large dams.” Sci. China, Ser. E 41 (4): 357–365. https://doi.org/10.1007/BF02917007.
Manes, C., and M. Brocchini. 2015. “Local scour around structures and the phenomenology of turbulence.” J. Fluid Mech. 779: 309–324. https://doi.org/10.1017/jfm.2015.389.
Mason, P. J., and K. Arumugam. 1985. “Free jet scour below dams and flip buckets.” J. Hydraul. Eng. 111 (2): 220–235. https://doi.org/10.1061/(ASCE)0733-9429(1985)111:2(220).
Meftah, M. B., and M. Mossa. 2006. “Scour holes downstream of bed sills in low-gradient channels.” J. Hydraul. Res. 44 (4): 497–509. https://doi.org/10.1080/00221686.2006.9521701.
Papanicolaou, A. N. T., F. Bressan, J. Fox, C. Kramer, and L. Kjos. 2018. “Role of structure submergence on scour evolution in gravel bed rivers: Application to slope-crested structures.” J. Hydraul. Eng. 144 (2): 03117008. https://doi.org/10.1061/(ASCE)HY.1943-7900.0001411.
Pasternack, G. B., C. R. Ellis, and J. D. Marr. 2007. “Jet and hydraulic jump near-bed stresses below a horseshoe waterfall.” Water Resour. Res. 43 (7): W07449. https://doi.org/10.1029/2006WR005774.
Prasad, A. K. 2000. “Particle image velocimetry.” Curr. Sci. Bangalore 79 (1): 51–60.
Raffel, M., C. E. Willert, and J. Kompenhans. 2007. Particle image velocimetry: A practical guide. Berlin: Springer Science & Business Media.
Rajaratnam, N., and M. R. Chamani. 1995. “Energy loss at drops.” J. Hydraul. Res. 38 (3): 373–384. https://doi.org/10.1080/00221689509498578.
Robinson, K. M., K. R. Cook, and G. J. Hanson. 2000. “Velocity field measurements at an overfall.” Trans. ASAE 43 (3): 665–670. https://doi.org/10.13031/2013.2748.
Si, J. H., S. Y. Lim, and X. K. Wang. 2018. “Flow structures in evolving scour holes caused by a plunging jet downstream of a weir.” J. Hydraul. Eng. 144 (6): 04018018. https://doi.org/10.1061/(ASCE)HY.1943-7900.0001452.
Wang, X. K., Z. Hao, J. X. Zhang, and S. K. Tan. 2014. “Flow around two tandem square cylinders near a plane wall.” Exp. Fluids 55 (10): 1–14. https://doi.org/10.1007/s00348-014-1818-1.
Wu, S., and N. Rajaratnam. 1996. “Submerged flow regimes of rectangular sharp-crested weirs.” J. Hydraul. Eng. 122 (7): 412–414. https://doi.org/10.1061/(ASCE)0733-9429(1996)122:7(412).
Wu, S., and N. Rajaratnam. 1998. “Impinging jet and surface flow regimes at drop.” J. Hydraul. Res. 36 (1): 69–74. https://doi.org/10.1080/00221689809498378.
Xie, C., and S. Y. Lim. 2015. “Effects of jet flipping on local scour downstream of a sluice gate.” J. Hydraul. Eng. 141 (4): 04014088. https://doi.org/10.1061/(ASCE)HY.1943-7900.0000983.
Zhao, X., X. Zhang, M. Zhao, and H. Tong. 2009. Hydraulics (in Chinese). Beijing: China Electric Power Press.
Information & Authors
Information
Published In
Copyright
©2019 American Society of Civil Engineers.
History
Received: Jan 19, 2018
Accepted: Mar 20, 2019
Published online: Aug 6, 2019
Published in print: Oct 1, 2019
Discussion open until: Jan 6, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.