Abstract

Forum papers are thought-provoking opinion pieces or essays founded in fact, sometimes containing speculation, on a civil engineering topic of general interest and relevance to the readership of the journal. The views expressed in this Forum article do not necessarily reflect the views of ASCE or the Editorial Board of the journal.

Get full access to this article

View all available purchase options and get full access to this article.

Acknowledgments

The writers thank Rex’s son, Will Elder, for the photos and insights he provided. They also thank Suzanne Kennedy for reviewing various drafts of this article; Rex Elder was a close friend of her father, Prof. Jack Kennedy (IIHR Director, 1966–91). Also, the writers acknowledge that this article does not include all of Elder’s conference papers or reports.

References

Allen, M., A. J. Odgaard, L. J. Weber, R. A. Elder, D. Hay, and D. Weitkamp. 1995. “Evaluation of gatewell flows for fish bypass at a large hydroelectric plant.” In Vol. 1 of Proc., 1st Int. Conf. on Water Resources Engineering, 534–537. Reston, VA: ASCE.
Ballester, R. E. 1953. “Discussion of Elder and Dougherty: Characteristics of fixed-dispersion cone valves.” ASCE Trans. 118: 930–936.
Blee, C. E. 1953. “Development of the Tennessee River waterway.” ASCE Trans. 118: 1132–1146.
Bowman, J. S. 1953. “Multipurpose river developments.” ASCE Trans. 118: 1125–1131.
Brooks, N. H., and C. Y. Koh. 1969. “Selective withdrawal from density-stratified reservoirs.” J. Hydraul. Div. 95 (4): 1369–1400.
Cassidy, J. J. and R. A. Elder. 1984. “Spillways of high dams.” In Vol. 2 of Developments in hydraulic engineering, edited by P. Novak, 159–182. New York: Elsevier.
Colebrook, C. F. 1939. “Turbulent flow in pipes with particular reference to the transitional region between smooth and rough pipes.” J. Inst. Civ. Eng. 11 (4): 133–156. https://doi.org/10.1680/ijoti.1939.13150.
Colebrook, C. F. 1958. “The flow of water in unlined, lined and partly lined rock tunnels.” Proc. Inst. Civ. Eng. 11 (1): 103–132. https://doi.org/10.1680/iicep.1958.2425.
Colgate, D. and R. Elder. 1961. “Design considerations regarding cavitation in hydraulic structures.” In Proc., 10th Hydraulic Division Conf. of American Society of Civil Engineers, 16–18. Reston, VA: ASCE.
Coyne, A. 1944. “Prototypes modernes de barrages et usines hydroélectriques” [Modern prototypes of dams and hydroelectric plants]. Tavaux 28: 25–29.
Davis, A. C., ed. 1942. Handbook of applied hydraulics. New York: McGraw-Hill.
Davis, A. C., ed. 1952. Handbook of applied hydraulics. 2nd ed. New York: McGraw-Hill.
Elder, R. A. 1956. “Friction measurements in Apalachia Tunnel.” J. Hydraul. Div. 82 (3): 1–36.
Elder, R. A. 1958. “Thermal density underflow design and experience.” In Proc., 7th Hydraulics Conf., 73–89. Iowa City, IA: Univ. of Iowa.
Elder, R. A. 1986. “Advances in hydraulic engineering practice: The last four decades and beyond.” J. Hydraul. Eng. 112 (2): 73–89. https://doi.org/10.1061/(ASCE)0733-9429(1986)112:2(73).
Elder, R. A., and G. B. Dougherty. 1953. “Characteristics of fixed-dispersion cone valves.” ASCE Trans. 118: 907–927.
Elder, R. A., and G. B. Dougherty. 1958. “Thermal density underflow diversion, Kingston Stream Plant.” J. Hydraul. Div. 84 (2): 1–20.
Elder, R. A., and J. M. Garrison. 1964. “Form-induced hydraulic forces on three-leaf intake gates.” J. Hydraul. Div. 90 (3): 215–233.
Elder, R. A., D. Hay, A. M. Alsaffar, and O. Batum. 1978. “Vortex model studies for emergency core cooling intakes.” In Proc., Joint Symp. of Design and Operation of Fluid Machinery, 80–84. Fort Collins, CO: Colorado State Univ.
Elder, R. A., A. J. Odgaard, V. C. Patel, S. Sinha, F. Sotiropoulos, and L. J. Weber. 1995. “The next generation of solution techniques for three-dimensional hydraulic-engineering problems.” In Vol. 2 of Proc., Advances in Hydro-Science and Engineering, 2187–2193. Beijing: Tsinghua University Press.
Elder, R. A., A. J. Odgaard, D. Weitkamp, and D. Zeigler. 1987. “Development of turbine intake downstream migrant diversion screen.” In Proc. Waterpower ‘87, 522–531. Reston, VA: ASCE.
Elder, R. A., M. N. Smith, and W. O. Wunderlich. 1969. “Aeration efficiency of Howell-Bunger valves.” J. Water Pollut. Control Fed. 41 (4): 629–639.
Elder, R. A. and J. P. Tullis. 1982. “Investigation into the failures of large cooling tower lift pumps.” In Proc., Symp. on Operating Problems of Pump Stations and Power Plants. Amsterdam, Netherlands: International Association of Hydraulic Research.
Elder, R. A. and W. O. Wunderlich. 1972. “Inflow density currents in TVA reservoirs.” In Proc., Int. Symp. Stratified Flows, 221–230. Reston, VA: ASCE.
Falvey, H. T. 1990. “Cavitation in chutes and spillways.” In Water resources technical publication engineering. Washington DC: Bureau of Reclamation.
Fry, A. S., M. A. Churchill, and R. A. Elder. 1953. “Significant effects of density currents on TVA’s integrated reservoir and river system.” In Proc., Int. Hydraulics Convention, 335–336. Minneapolis: International Association of Hydraulic Research.
Gongwer, V. 1953. “Discussion of Elder and Dougherty: Characteristics of fixed-dispersion cone valves.” ASCE Trans. 118: 928–942.
Hager, W. H., and H. T. Falvey. 2003. “Alvin Peterka—Hydraulic engineer.” J. Hydraul. Eng. 129 (9): 657–659. https://doi.org/10.1061/(ASCE)0733-9429(2003)129:9(657).
Harleman, D., and R. A. Elder. 1965. “Withdrawal from two-layer stratified flow.” J. Hydraul. Div. 91 (4): 43–58.
Harza, R. D. 1984. “Harza engineering company: Developing water resources worldwide, 1920–1984.” In An address given to newcomen society meeting. Chicago: Newcomen Society of the United States.
Hecker, G. E. and R. A. Elder. 1965. “Vibration of reverse flow Tainter lock valves.” In Proc., 11th Congress of the Int. Association for Hydraulic Research, 4–14. Amsterdam, Netherlands: International Association of Hydraulic Research.
Hecker, G. E. and R. A. Elder. 1970. “Design and testing of the Nickajack multi-leaf gate system.” In Proc., IAHR Hydromachinery Conf. Symp. Amsterdam, Netherlands: International Association of Hydraulic Research.
Hickox, G. A., A. J. Peterka, and R. A. Elder. 1948a. “Closure to ‘Friction coefficients in a large tunnel’.” ASCE Trans. 113: 1071–1076.
Hickox, G. A., A. J. Peterka, and R. A. Elder. 1948b. “Friction coefficients in a large tunnel.” ASCE Trans. 113: 1027–1055.
Houston, K. L. 1984. Hydraulic model study results, Hoover Dam tunnel spillways. Denver: Bureau of Reclamation.
Jaske, R. T. 1968. Thermal modification of river water quality. Richland, WA: Battelle Northwest.
Kinzie, P. A. 1952. “High-pressure outlet works.” Chap. 9 in Handbook of applied hydraulics, edited by A. C. Davis. 2nd ed. New York: McGraw-Hill.
Kulin, G., ed. 1968. Hydraulics research in the United States. Washington, DC: National Bureau of Standards.
Locher, F. A. and S. T. Hsu. 1984. “Energy dissipation at high dams.” In Developments in hydraulic engineering-2, edited by P. Novak, 183–238. Amsterdam, Netherlands: Elsevier.
McCartney, L. 1988. Friends in high places: The Bechtel story. New York: Simon and Schuster.
Middleton, H. K., ed. 1959. Hydraulics research in the United States. Washington, DC: National Bureau of Standards.
Middleton, H. K. and S. W. Matchett, ed. 1953. Hydraulics research in the United States. Washington, DC: National Bureau of Standards.
Mining Engineering. 1998. “Bechtel Corp., industry partnership award.” In Proc., Society for Mining, Metallurgy and Exploration. Engelwood, CO: Society for Mining, Metallurgy & Exploration.
Moody, L. F. 1944. “Friction factors for pipe flow.” Trans. Am. Soc. Mech. Eng. 66 (8): 671–684.
Naudascher, E. 1991. “Hydrodynamic forces.” In Hydraulic structures design manual 3, Intl Assoc. for Hydraulic Research. Rotterdam, Netherlands: A.A. Balkema.
Neal, H. E. 1970. The people’s giant: The story of TVA. New York: J. Messner.
Nikuradse, J. 1932. Gesetzmässigkeiten der turbulent strömung in glatten rohren [Laws of turbulent flow in smooth pipes]. Berlin: Verein Deutscher Ingenieure.
Nikuradse, J. 1933. Strömungsgesetze in rauhen Rohren [Laws of flow in rough pipes]. Berlin: Verein Deutscher Ingenieure.
Novak, P., A. I. B. Moffat, C. Nalluri, and R. Narayanan. 1989. Hydraulic structures. Boston: Unwin Hyman.
Odgaard, A. J., M. P. Cherian, and R. A. Elder. 1987. “Fish diversion in hydropower intake.” J. Hydraul. Eng. 113 (4): 520–536. https://doi.org/10.1061/(ASCE)0733-9429(1987)113:4(520).
Odgaard, A. J., R. A. Elder, and D. E. Weitkamp. 1990. “Turbine-intake fish-diversion system.” J. Hydraul. Eng. 116 (11): 1301–1316. https://doi.org/10.1061/(ASCE)0733-9429(1990)116:11(1301).
Peterka, A. J. 1946. “Model and prototype studies on unique spillway (Fontana Dam).” Civ. Eng. 16 (6): 249.
Peterka, A. J. 1958. Hydraulic design of stilling basins and energy dissipators. Denver: Bureau of Reclamation.
Peterka, A. J. 1984. Hydraulic design of stilling basins and energy dissipators. 8th ed. Denver: Bureau of Reclamation.
Rhone, T. J., and A. J. Peterka. 1959. “Improved tunnel spillway flip buckets.” J. Hydraul. Div. 85 (12): 53–76.
Rothman, M. 1991. “The rebuilding of Bechtel: Riley Bechtel has made peace with his past and taken on the family job of doing the undoable.” California Business Journal, April 14, 2014.
Rouse, H. 1943. “Evaluation of boundary roughness.” In Proc., Second Hydraulics Conf. Iowa City, IA: Univ. of Iowa.
Rouse, H. 1948. “Discussion of ‘Trans ASCE, Vol. 113, Discussion of Hickox, G.A., Peterka, A.J. and Elder, R.A. (1948)’ Friction coefficients in a large tunnel.” ASCE Trans. 113: 1049–1053.
Rouse, H. 1976. Hydraulics in the United States, 1776–1976. Iowa City, IA: Univ. of Iowa.
Serre, M., A. J. Odgaard, and R. A. Elder. 1994. “Energy loss at combining pipe junction.” J. Hydraul. Eng. 120 (7): 808–830. https://doi.org/10.1061/(ASCE)0733-9429(1994)120:7(808).
Sweeney, C. E., R. A. Elder, and D. Hay. 1982. “Pump sump design experience summary.” J. Hydraul. Div. 108 (3): 361–377.
Track Force. 1965. “Factors influencing flow in large conduits.” J. Hydraul. Div. 91 (6): 123–152.
Turan, C., P. M. Carrica, T. C. Lyons, D. Hay, and L. Weber. 2008. “Study of the free surface flow on an ogee-crested fish bypass.” J. Hydraul. Eng. 134 (8): 1172–1175. https://doi.org/10.1061/(ASCE)0733-9429(2008)134:8(1172).
TVA (Tennessee Valley Authority). 1950. The Fontana project: A comprehensive report on the planning, design construction and initial operations of the Fontana project. Washington, DC: TVA.
TVA (Tennessee Valley Authority). 1953. Hydraulic model studies, Fontana project. Knoxville, TN: TVA.
USACERC (US Army Coastal Engineering Research Center). 1964. Fourth Interagency Conf. on Hydraulics Laboratory Techniques and Instrumentation. Washington, DC: USACERC.
USBR (US Bureau of Reclamation). 1965. Friction factors for large conduits flowing full. Washington, DC: USBR.
USBR (US Bureau of Reclamation). 1977. Friction factors for large conduits flowing full. Washington, DC: USBR.
Vigander, S., R. A. Elder, and N. H. Brooks. 1970. “Internal hydraulics of thermal discharge diffusers.” J. Hydraul. Div. 96 (2): 509–527.
Weber, L. J., D. Weitkamp, D. Hay, R. A. Elder, A. J. Odgaard, and C. Parameswar. 1995. “Development of a juvenile fish outfall structure.” In Proc., Waterpower ‘95, 75–81. New York: ASCE.
Weitkamp, D. E., and M. Katz. 1980. “A review of dissolved gas supersaturation literature.” Trans. Am. Fish. Soc. 109 (6): 659–702. https://doi.org/10.1577/1548-8659(1980)109%3C659:ARODGS%3E2.0.CO;2.
Westfall, D. E. 1989. “Friction losses for use in the design of hydraulic conveyance tunnels.” In Design of hydraulic structures, edited by M. L. Albertson and R. A. Kia, 349–355. Rotterdam, Netherlands: A.A. Balkema.
Wunderlich, W. O., and R. A. Elder. 1969a. “Effect of intake elevation and operation on water temperature.” J. Hydraul. Div. 95 (6): 2081–2091.
Wunderlich, W. O., and R. A. Elder. 1969b. “The water temperature regime of fully mixed streams.” In Proc., ASCE Hydraulics Div., 17th Specialty Conf., Logan, UT: Utah State Univ.
Wunderlich, W. O., and R. A. Elder. 1970. “Discussion of ‘Selective withdrawal from density-stratified reservoirs.’ by Brooks and Koh (1969).” J. Hydraul. Div. 96 (5): 1207–1211.

Information & Authors

Information

Published In

Go to Journal of Hydraulic Engineering
Journal of Hydraulic Engineering
Volume 145Issue 10October 2019

History

Received: Oct 30, 2018
Accepted: Feb 13, 2019
Published online: Aug 14, 2019
Published in print: Oct 1, 2019
Discussion open until: Jan 14, 2020

Permissions

Request permissions for this article.

Authors

Affiliations

Robert Ettema, F.ASCE [email protected]
Professor, Dept. of Civil and Environmental Engineering, Colorado State Univ., 1372 Campus Deliver, Fort Collins, CO 80523 (corresponding author). Email: [email protected]
John J. Cassidy, Dist.M.ASCE [email protected]
Hydraulic Engineer Ret., Bechtel Corporation, 50 Beale St., San Francisco, CA 94105. Email: [email protected]
Patrick Ryan, M.ASCE [email protected]
Hydraulic Engineer Ret., Bechtel Corporation, 12011 Sunset Hills Rd., Reston, VA 20190. Email: [email protected]
Duncan Hay, M.ASCE [email protected]
Hydraulic Engineer, Oakwood Consulting, 1705 Ungless Way, Port Moody, BC, Canada V3H0C9. Email: [email protected]
A. Jacob Odgaard, F.ASCE [email protected]
Professor and Dean, School of Architecture and Design, Southwest Jiaotong Univ., Chengdu, China; Professor Emeritus, Dept. of Civil and Environmental Engineering, Iowa Institute of Hydraulic Research-Hydroscience and Engineering, Univ. of Iowa, 300 Riverside Dr., Iowa City, IA 52242. Email: [email protected]
Angelos N. Findikakis, M.ASCE [email protected]
Senior Principal Engineer and Bechtel Fellow, Bechtel Corporation, 448 Traverso Ave., Los Altos, CA 94022. Email: [email protected]
Adnan Alsaffar, F.ASCE [email protected]
Hydraulic Engineer Ret., Bechtel Corporation, 8300 Tomlinson Ave., Bethesda, MD 20817. Email: [email protected]
Larry J. Weber, F.ASCE [email protected]
Professor, Iowa Institute of Hydraulic Research-Hydroscience and Engineering, Civil and Environmental Engineering, Univ. of Iowa, 300 Riverside Dr., Iowa City, IA 52242. Email: [email protected]

Metrics & Citations

Metrics

Citations

Download citation

If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.

Cited by

View Options

Get Access

Access content

Please select your options to get access

Log in/Register Log in via your institution (Shibboleth)
ASCE Members: Please log in to see member pricing

Purchase

Save for later Information on ASCE Library Cards
ASCE Library Cards let you download journal articles, proceedings papers, and available book chapters across the entire ASCE Library platform. ASCE Library Cards remain active for 24 months or until all downloads are used. Note: This content will be debited as one download at time of checkout.

Terms of Use: ASCE Library Cards are for individual, personal use only. Reselling, republishing, or forwarding the materials to libraries or reading rooms is prohibited.
ASCE Library Card (5 downloads)
$105.00
Add to cart
ASCE Library Card (20 downloads)
$280.00
Add to cart
Buy Single Article
$35.00
Add to cart

Get Access

Access content

Please select your options to get access

Log in/Register Log in via your institution (Shibboleth)
ASCE Members: Please log in to see member pricing

Purchase

Save for later Information on ASCE Library Cards
ASCE Library Cards let you download journal articles, proceedings papers, and available book chapters across the entire ASCE Library platform. ASCE Library Cards remain active for 24 months or until all downloads are used. Note: This content will be debited as one download at time of checkout.

Terms of Use: ASCE Library Cards are for individual, personal use only. Reselling, republishing, or forwarding the materials to libraries or reading rooms is prohibited.
ASCE Library Card (5 downloads)
$105.00
Add to cart
ASCE Library Card (20 downloads)
$280.00
Add to cart
Buy Single Article
$35.00
Add to cart

Media

Figures

Other

Tables

Share

Share

Copy the content Link

Share with email

Email a colleague

Share