Velocity Correction Coefficients in Pressure Correction–Type Model
Publication: Journal of Hydraulic Engineering
Volume 145, Issue 6
Abstract
Velocity correction methods are often used in numerical models simulating fluid flows. This paper presents a new method to evaluate the velocity correction coefficient: an equation constructed from the coefficient matrix of the linearized momentum equations is simultaneously solved for the velocity correction coefficient. In addition, the implicit equation of correction coefficients (ECC) method includes a smoothing mechanism, which makes it numerically more stable than the commonly used Semi-Implicit Method for Pressure-Linked Equations-Consistent (SIMPLEC) method because larger relaxation factors and time steps can be used. The ECC method was integrated into a two-dimensional (2D) depth-integrated unstructured finite-volume method (FVM) model based on a hybrid mesh system (triangle and quadrilateral). It was demonstrated using one experimental case and a field case. According to the numerical tests, the proposed ECC method can not only enhance the numerical stability but also improve the computing efficiency due to the capability of using large relaxation factors and large time steps for the pressure correction–type models.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This work is a part of research sponsored by the USDA Agriculture Research Service under Specific Research Agreement No. 6060-13000-025-00D (monitored by the USDA-ARS National Sedimentation Laboratory) and The University of Mississippi.
References
Chao, X. B., Y. F. Jia, S. S-Y. Wang, and A. K. M. Hossain. 2012. “Numerical modeling of surface flow and transport phenomena with applications to Lake Pontchartrain.” Lake Reservoir Manage. 28 (1): 31–45. https://doi.org/10.1080/07438141.2011.639481.
Chorin, A. J. 1967. “A numerical method for solving incompressible viscous flow problems.” J. Comput. Phys. 2 (1): 12–26. https://doi.org/10.1016/0021-9991(67)90037-X.
DHI (Danish Hydraulic Institute). 2011. MIKE21 & MIKE 3 Flow Model FM (hydrodynamic module short description). Denmark: Danish Hydraulic Institute.
Harlow, F. H., and J. E. Welch. 1965. “Numerical calculation of time-dependent viscous incompressible flow of fluid with free surface.” Phys. Fluids 8 (12): 2182–2189. https://doi.org/10.1063/1.1761178.
Issa, R. I. 1986. “Solution of implicitly discretized fluid flow equations by operator-splitting.” J. Comput. Phys. 62 (1): 40–65. https://doi.org/10.1016/0021-9991(86)90099-9.
Jia, Y., X. B. Chao, and T. T. Zhu. 2013. CCHE3D technical manual. University, MS: National Center for Computational Hydroscience and Engnieering, Univ. of Mississippi.
Jia, Y., and S. S.-Y. Wang. 1999. “Numerical model for channel flow and morphological changes studies.” J. Hydraul. Eng. 125 (9): 924–933. https://doi.org/10.1061/(ASCE)0733-9429(1999)125:9(924).
Jia, Y., S. S.-Y. Wang, and Y. C. Xu. 2002. “Validation and application of a 2D model to channels with complex geometry.” Int. J. Comput. Eng. Sci. 3 (1): 57–71. https://doi.org/10.1142/S146587630200054X.
Kim, J., and P. Moin. 1985. “Application of a fractional step method to incompressible Navier-Stokes equations.” J. Comput. Phys. 59 (2): 308–323. https://doi.org/10.1016/0021-9991(85)90148-2.
Lai, Y. G. 2008. “SRH-2D version 2: Theory and user’s manual.” In Sedimentation and river hydraulics–two-dimensional river flow modeling. Denver: Technical Service Center, Bureau of Reclamation.
Lai, Y. G. 2010. “Two-dimensional depth-averaged flow modeling with an unstructured hybrid mesh.” J. Hydraul. Eng. 136 (1): 12–23. https://doi.org/10.1061/(ASCE)HY.1943-7900.0000134.
Lien, F.-S. 2000. “A pressure-based unstructured grid method for all-speed flows.” Int. J. Numer. Methods. Fluids 33 (3): 355–374. https://doi.org/10.1002/1097-0363(20000615)33:3%3C355::AID-FLD12%3E3.0.CO;2-X.
Ni, M. J., and M. A. Abdou. 2007. “A bridge between projection methods and SIMPLE type methods for incompressible Navier-Stokes equations.” Int. J. Numer. Methods. Eng. 72 (12): 1490–1512. https://doi.org/10.1002/nme.2054.
Patankar, S. V. 1980. Numerical heat transfer and fluid flow. New York: McGraw-Hill.
Rhie, C. M., and W. L. Chow. 1983. “Numerical study of the turbulent flow passed an airfoil with trailing edge separation.” AIAA J. 21 (11): 1525–1532. https://doi.org/10.2514/3.8284.
Shetter, A. S., and K. K. Murphy. 1996. “A numerical study of division flow in open channels.” J. Hydraul. Res. 34 (5): 651–675.
Van Doormaal, J. P., and G. D. Raithby. 1984. “Enhancements of the simple method for prediction incompressible fluid flow.” Numer. Heat Transfer 7 (2): 147–163. https://doi.org/10.1080/01495728408961817.
Wu, W. M. 2007. Computational river dynamics. London: Taylor & Francis.
Zhang, Y., Y. Jia, and T. T. Zhu. 2015. “Edge gradients evaluation in 2D hybrid FVM Model.” J. Hydraul. Res. 53 (4): 423–439. https://doi.org/10.1080/00221686.2015.1029017.
Information & Authors
Information
Published In
Copyright
©2019 American Society of Civil Engineers.
History
Received: Jan 23, 2018
Accepted: Nov 29, 2018
Published online: Mar 20, 2019
Published in print: Jun 1, 2019
Discussion open until: Aug 20, 2019
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.