Length for Uniform Flow Development in a Rough Laboratory Flume
Publication: Journal of Hydraulic Engineering
Volume 145, Issue 1
Abstract
Uniform flow is important for physical model studies because generalizing flow data is possible only if the collected data is from locations where the flow is uniform, i.e., the test section. Presented in this paper are results from a physical model study of the channel length required for uniform flow to develop in a rough open channel with fully turbulent flow (i.e., the uniform flow development length, ). The objective of this study was to develop a physically meaningful and parsimonious relationship for predicting . It is concluded that is proportional to flow depth and channel width, and inversely proportional to bed material size. Also, neither Froude’s nor Reynold’s number is significant for predicting in a rough open channel with fully turbulent flow.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This study was supported by the STC program of the National Science Foundation via the National Center for Earth-surface Dynamics under agreement EAR-0120914 and is intended as a contribution in the area of stream restoration.
References
Bonakdari, H., G. Lipeme-Kouyi, and G. L. Asawa. 2014. “Developing turbulent flows in rectangular channels: A parametric study.” J. Appl. Res. Water Wastewater 1 (2): 53–58.
Bray, D. I. 1982. “Flow resistance in gravel-bed rivers.” In Gravel-bed river, fluvial processes, engineering and management, edited by R. D. Hey, J. C. Bathurst, and C. R. Thorne, 109–137. New York: Wiley.
Burnham, K. P., and D. R. Anderson. 2002. Model selection and multimodel inference: A practical information-theoretic approach. New York: Springer.
Chen, X., and Y. M. Chiew. 2003. “Response of velocity and turbulence to sudden change of bed roughness in open-channel flow.” J. Hydraul. Eng. 129 (1): 35–43. https://doi.org/10.1061/(ASCE)0733-9429(2003)129:1(35).
Chin, D. A. 2006. Water-resources engineering. 2nd ed. Upper Saddle River, NJ: Prentice.
Chow, V. T. 1959. Open-channel hydraulics. New York: McGraw-Hill.
Efron, B., and R. Tibshirani. 1994. An introduction to the bootstrap. New York: Chapman and Hall.
Elger, D. F., B. C. Williams, C. T. Crowe, and J. A. Roberson. 2012. Engineering fluid mechanics. 10th ed. New York: Wiley.
French, R. H. 1985. Open-channel hydraulics. New York: McGraw-Hill.
Gadbois, J., and G. V. Wilkerson. 2014. “Uniform flow development length in a rough laboratory flume.” In World Environmental and Water Resources Congress, 1234–1242. Reston, VA: ASCE.
Henderson, F. M. 1966. Open channel flow. New York: MacMillan.
Kirkgöz, M. S., and M. Ardiçhoğlu. 1997. “Velocity profiles of developing and developed open channel flow.” J. Hydraul. Eng. 123 (12): 1099–1105. https://doi.org/10.1061/(ASCE)0733-9429(1997)123:12(1099).
Ranga Raju, K. G., G. L. Asawa, and H. K. Mishra. 2000. “Flow-establishment length in rectangular channels and ducts.” J. Hydraul. Eng. 126 (7): 533–539. https://doi.org/10.1061/(ASCE)0733-9429(2000)126:7(533).
Robert, A. 2003. River processes: An introduction to fluvial dynamics. London: Hodder Arnold.
Sharma, S. 2015. “Uniform flow development length in a rough laboratory flume.” M.S. thesis, Dept. Civil and Environmental Engineering, Southern Illinois Univ. at Carbondale.
Simons, D. B., and F. Sentürk. 1992. Sediment transport technology: Water and sediment dynamics. Littleton, CO: Water Resources Publications.
Sturm, T. W. 2001. Open channel hydraulics. New York: McGraw-Hill.
Tominaga, A., I. Nezu, K. Ezaki, and H. Nakagawa. 1989. “Three dimensional turbulent structure in straight open channel flows.” J. Hydraul. Res. 27 (1): 149–173. https://doi.org/10.1080/00221688909499249.
Wahl, T. L. 2002. “WinADV.” US Bureau of Reclamation: Denver. Accessed July 13, 2017. https://www.usbr.gov/tsc/.
Wang, J. J. 1991. “On the development of boundary layer flow over a gravel-bed.” Chinese Sci. Bull. 36 (20): 1725–1728.
Information & Authors
Information
Published In
Copyright
©2018 American Society of Civil Engineers.
History
Received: Oct 30, 2017
Accepted: Jul 10, 2018
Published online: Nov 13, 2018
Published in print: Jan 1, 2019
Discussion open until: Apr 13, 2019
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.