Transitional Flow at Low-Head Ogee Spillway
Publication: Journal of Hydraulic Engineering
Volume 144, Issue 2
Abstract
Low-head gated spillways provide controlled flow releases for defense against floods and a reliable supply of water for beneficial uses. In addition, a system of spillways in a large water resources system may be used for flow monitoring to assess compliance with water quality regulations and evaluate performance measures of ecological restoration projects. The flow discharge through spillways is typically calculated by rating equations applicable to free (uncontrolled) or gate-controlled flows under submerged and unsubmerged conditions. Depending on the spillway geometry, headwater and tailwater levels, and gate opening, four types of flow, each requiring a unique rating equation, can occur. However, the flow type for the given conditions must be classified first to ensure that the appropriate rating equation is used to compute discharge. Spillway flow classification requires identifying the transition thresholds between the various flow types. Results from a study conducted at the Georgia Institute of Technology to identify these transitions experimentally in a hydraulic model study of a South Florida Water Management District spillway are presented here. Results are summarized in a unified set of graphical transition curves for the four flow types in terms of the depth at the spillway crest. The depth at the spillway crest is also used to develop a head-discharge relationship for uncontrolled, submerged flow, the flow type that is the most difficult to predict.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This study is the result of collaborative efforts between the South Florida Water Management District and the Georgia Institute of Technology. The valuable comments of the anonymous reviewers are gratefully acknowledged.
References
Ansar, M., and Chen, Z. (2009). “Generalized flow rating equations at prototype gated spillways.” J. Hydraul. Eng., 602–608.
Ansar, M., and González-Castro, J. A. (2003). “Submerged weir flow at prototype gated spillways.” Proc., ASCE/EWRI Congress (CD-ROM), ASCE, Reston, VA.
ASCE. (2000). Hydraulic modeling: Concepts and practice, Reston, VA.
Azimi, A. H., Rajaratnam, N., and Zhu, D. Z. (2014). “Submerged flows over rectangular weirs of finite crest length.” J. Irrig. Drain. Eng., 06014001.
Azimi, A. H., Rajaratnam, N., and Zhu, D. Z. (2016). “Water surface characteristics of submerged rectangular sharp-crested weirs.” J. Hydraul. Eng., 06016001.
Biering, C., Hong, S., Sturm, T., Yoon, K. S., and González-Castro, J. A. (2014). “Evaluation of scour downstream of riprap aprons on low-head ogee spillways” Proc., River Flow 2014, A. J. Schleiss, G. De Cesare, M. J. Franca, and M. Pfister, eds., Taylor & Francis, London.
Castro-Orgaz, O., Giraldez, V., and Ayuso, A. (2008). “Critical flow over spillway profiles.” Proc. Inst. Civil Eng. Water Manage., 161(2), 89–95.
González-Castro, J. A., and Mohammed, A. (2009). “Flow ratings for Kissimmee River Pool A revisited.”, South Florida Water Management District, West Palm Beach, FL.
Grace, J. (1963). “Typical spillway structure for central and southern Florida water-control project.”, U.S. Army Corps of Engineers, Vicksburg, MS.
Hager, W. H., and Bremen, R. (1988). “Plane gate on standard spillway.” J. Hydraul. Eng., 1390–1397.
Hong, S., Sturm, T. W., Stoesser, T., and González-Castro, J. A. (2012). “Evaluation of rating curves and flow transitions for controlled and uncontrolled low-head ogee spillways.” Hydraulic Measurements and Experimental Methods Conf., ASCE, Reston, VA.
JCGM (Joint Committee for Guides in Metrology). (2008). “Evaluation of measurement data—Guide to the expression of uncertainty in measurement.” ⟨www.bipm.org/en/publications/guides//⟩ (May 15, 2015).
National Research Council. (2010). Advancing the science of climate change, National Academies Press, Washington, DC.
Tullis, B. P. (2011). “Behavior of submerged ogee crest weir discharge coefficients.” J. Irrig. Drain. Eng., 677–681.
Tullis, B. P., and Neilson, J. (2008). “Performance of submerged ogee-crest weir head-discharge relationships.” J. Hydraul. Eng., 486–491.
USACE (U.S. Army Corps of Engineers). (1977). Hydraulic design criteria, Vol. 1, Army Engineers Waterways Experiment Station, Vicksburg, MS.
USACE (U.S. Army Corps of Engineers). (1990). Hydraulic design of spillways, Vicksburg, MS.
USBR (U.S. Bureau of Reclamation). (1987). Design of small dams, U.S. Government Printing Office, Washington, DC.
Villemonte, J. R. (1947). “Submerged weir discharge studies.” Eng. News Rec., 139(26), 866–869.
Wu, S., and Rajaratnam, N. (1996). “Submerged flow regimes of rectangular sharp-crested weirs.” J. Hydraul. Eng., 412–414.
Information & Authors
Information
Published In
Copyright
©2017 American Society of Civil Engineers.
History
Received: Aug 11, 2016
Accepted: Jul 6, 2017
Published online: Nov 23, 2017
Published in print: Feb 1, 2018
Discussion open until: Apr 23, 2018
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.