DENSE: Semicontinuous, Automated, Gravimetric Measurement Device for Suspended Sediment Concentrations
Publication: Journal of Hydraulic Engineering
Volume 143, Issue 12
Abstract
Automated, real-time suspended sediment concentration (SSC) measurement techniques are important for the design and operation of hydraulic structures as well as the sediment management of river and reservoir systems. Traditional methods provide high-accuracy data but are inadequate to provide high temporal and spatial resolution. Surrogate methods, such as turbidity, laser diffraction, or acoustic backscatter, allow higher temporal and spatial resolution, but accuracy is negatively affected by natural variations in sediment grain size, color, or shape and the maximum measurable concentration is limited. To overcome these limitations and to close the gap between traditional and surrogate technologies, a new automatic density measurement device called a densimeter for semicontinuous SSC measurements (DENSE), for high SSC values, is presented. Laboratory tests have been performed for the evaluation of its performance and precision. The results show that the new DENSE technology has an accuracy of .
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors would like to thank Michael Schaub for his help throughout the design and construction of the prototypes.
References
Agrawal, Y., and Pottsmith, C. (2001). “Laser sensors for monitoring sediments: Capabilities and limitations, a survey.” Proc., 7th Federal Interagency Sedimentation Conf. (III), Reno, NV, 144–151.
Calhoun, D. L., and Rasmussen, T. C. (2001). “Densimetric monitoring of suspended-sediment concentrations, northeastern Georgia.” Proc., 7th Federal Interagency Sedimentation Conf. (III), Reno, NV, 86–93.
Campbell, C. G., Laycak, D. T., Hoppes, W., Tran, N. T., and Shi, F. G. (2005). “High concentration suspended sediment measurements using a continuous fiber optic in-stream transmissometer.” J. Hydrol., 311(1), 244–253.
Chung, C.-C., and Lin, C.-P. (2011). “High concentration suspended sediment measurements using time domain reflectometry.” J. Hydrol., 401(1–2), 134–144.
Crawford, A. M., and Hay, A. E. (1993). “Determining suspended sand size and concentration from multifrequency acoustic backscatter.” J. Acous. Soc. Am., 94(6), 3312–3324.
Felix, D., Albayrak, I., and Boes, R. M. (2016). “Continuous measurement of suspended sediment concentration: Discussion of four techniques.” Measurement, 89, 44–47.
Gartner, J. W., and Cheng, R. T. (2001). “The promises and pitfalls of estimating total suspended solids based on backscatter intensity from acoustic Doppler current profiler.” Proc., 7th Federal Interagency Sedimentation Conf. (III), Reno, NV, 119–126.
Gartner, J. W., and Cheng, R. T. (2001). “The promises and pitfalls of estimating total suspended solids based on backscatter intensity from acoustic Doppler current profilers.” Proc., 7th Federation Interagency Sedimentation Conf., Reno, NV, III-119–III-126.
Gray, J. R., and Gartner, J. W. (2009). “Technological advances in suspended sediment surrogate monitoring.” Water Resour. Res., 45(4), 2–3.
Gray, J. R., and Glysson, G. D. (2003). Proceedings of the Federal Interagency Sedimentation Workshop on Turbidity and Other Sediment Surrogates, April 30–May 2, 2002, Reno, Nevada, U.S. Geological Survey, Reston, VA.
Gray, J. R., and Landers, M. N. (2014). “Measuring suspended sediment.” Comprehensive water quality and purification, S. Ahuja, ed., Vol. 1, Elsevier, Amsterdam, Netherlands, 157–204.
Gray, J. R., and Simões, F. J. M. (2008). “Estimating sediment discharge.” Sedimentation engineering—Processes, measurements, modeling, and practice, M. Garcia, ed., ASCE, Reston, VA, 1067–1088.
Larsen, M. C., Figueroa-Alamo, C., Gray, J. R., and Fletcher, W. (2001). “Continuous automated sensing of streamflow density as a surrogate for suspended-sediment concentration sampling.” Proc., 7th Federal Interagency Sedimentation Conf. (III), Reno, NV, 102–109.
Lewis, A. J., and Rasmussen, T. C. (1999). “Determination of suspended sediment concentrations and particle size distributions using pressure measurements.” J. Environ. Qual., 28(5), 1490–1496.
Rai, A. K., and Kumar, A. (2015). “Continuous measurement of suspended-sediment concentration: Technological advancement and future outlook.” Measurement, 76, 209–227.
Skinner, J. V., and Beverage, J. P. (1982). “A fluid-density gage for measuring suspended sediment concentration.” A Study of Methods Used in Measurement and Analysis of Sediment Loads in Streams: Federal Interagency Sedimentation Project Rep. X, U.S. Army Corps of Engineers, St. Paul, MN.
Smith, C. (2004). “Estimation of particle sizes for a range of narrow size distributions of natural sands suspended in water using multi-frequency acoustic backscatter.” M.S. thesis, National Center for Physical Acoustics, Univ. of Mississippi, Oxford, MS.
Thorne, P. D., and Hanes, D. M. (2002). “A review of acoustic measurement of small-scale sediment processes.” Continental Shelf Res., 22(4), 603–632.
Thorne, P. D., and Taylor, J. (2000). “Acoustic measurements of boundary layer flow and sediment flux.” J. Acous. Soc. Am., 108(4), 1568–1581.
Thorne, P. D., Vincent, C. E., Hardcastle, P. J., Rehman, S., and Pearson, N. (1991). “Measuring suspended sediment concentrations using acoustic backscatter devices.” Marine Geol., 98(1), 7–16.
Topping, D. J., Rubin, D. M., Wright, S. A., and Melis, T. S. (2011). Field evaluation of the error arising from inadequate time averaging in the standard use of depth-integrating suspended-sediment samplers, U.S. Geological Survey, Reston, VA, 95.
Vilà, T. C. (2009). “New methods to measure suspended sediment concentration.” Escola Tècnica Superior d'Enginyers de Camins, Canals i Ports de Barcelona—Enginyeria de Camins, Canals i Ports, Barcelona, Spain.
Walling, D. E., and Webb, B. W. (1996). “Erosion and sediment yield: Global and regional perspectives.” Proc., Int. Symp., IAHS Press, Oxfordshire, U.K.
Wren, D. G., Barkdoll, B. D., Kuhnle, R. A., and Derrow, R. W. (2000). “Field techniques for suspended-sediment measurement.” J. Hydrol. Eng., 97–104.
Information & Authors
Information
Published In
Copyright
©2017 American Society of Civil Engineers.
History
Received: Nov 2, 2016
Accepted: May 22, 2017
Published online: Sep 29, 2017
Published in print: Dec 1, 2017
Discussion open until: Feb 28, 2018
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.