Characteristics of a Debris-Flow Drainage Channel with a Step-Pool Configuration
This article has a reply.
VIEW THE REPLYThis article has a reply.
VIEW THE REPLYPublication: Journal of Hydraulic Engineering
Volume 143, Issue 9
Abstract
Theoretical analysis and experimental testing of a debris-flow drainage channel with a step-pool configuration are conducted in this paper. The design conditions of the drainage channel with step-pool configuration were obtained by theoretical analysis, including the design shape of the step-pool configuration, design slope of the step section, and total length of a single step-pool configuration. In addition, the correction coefficients of the debris-flow jet length were obtained with different debris-flow densities by comparing the experimental and calculation results. Moreover, the debris flow repeats an acceleration-deceleration motion in the drainage channel to achieve a balanced discharge without scouring or deposition. At the downstream of the step-pool configuration, the average debris-flow velocity decreased by approximately 28 and 40% with debris-flow densities of and . Furthermore, the energy-dissipation ratio varied between debris-flow densities of and . Finally, the authors discuss different types of drainage channels in practical debris-flow hazard-mitigation engineering and parameter variations of these drainage channels.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This study was supported by the National Key Technology Research and Development Program of China (No. 2014BAL05B01), the Science and Technology Service Network Initiative of CAS (No. KFJ-EW-STS-094), the Youth Innovation Promotion Association CAS (2017426), and the West Light Foundation of CAS. Furthermore, the authors thank the anonymous reviewers and editors for their comments.
References
Aberle, J., and Smart, G. M. (2003). “The influence of roughness structure on flow resistance on steep slopes.” J. Hydraul. Eng., 41(3), 259–269.
Abrahams, A. D., Li, G., and Atkinson, J. F. (1995). “Step-pool streams: Adjustment to maximum flow resistance.” Water Resour. Res., 31(10), 2593–2602.
Billi, P., Preciso, E., and Salemi, E. (2014). “Rhythmic roughness elements and channel morphology of gravel bed rivers.” Zeitschrift für Geomorphologie, 58(3), 337–366.
Chartrand, S. M., Jellinek, M., Whiting, P. J., and Stamm, J. (2011). “Geometric scaling of step-pools in mountain streams: Observations and implications.” Geomorphology, 129(1–2), 141–151.
Chartrand, S. M., and Whiting, P. J. (2000). “Alluvial architecture in headwater streams with special emphasis on step-pool topography.” Earth Surf. Processes Landforms, 25(6), 583–600.
Chen, J., Chen, X., Li, Y., and Wang, F. (2015a). “An experimental study of dilute debris flow characteristics in a drainage channel with an energy dissipation structure.” Eng. Geol., 193, 224–230.
Chen, J., Chen, X., Zhao, W., Yu, X., and Wang, X. (2016a). “Experimental study on the characteristics of a debris-flow drainage channel with an energy dissipation structure.” Bull. Eng. Geol. Environ., 76(1), 341–351.
Chen, J. G., Chen, X. Q., Chen, H. Y., and Zhao, W. Y. (2016b). “Characteristics of viscous debris flow in a drainage channel with an energy dissipation structure.” J. Mt. Sci., 13(2), 223–233.
Chen, J. G., Chen, X. Q., Wang, T., Zou, Y. H., and Zhong, W. (2014a). “Types and causes of debris flow damage to drainage channels in the Wenchuan earthquake area.” J. Mountain Sci., 11(6), 1406–1419.
Chen, X., Cui, P., You, Y., Chen, J., and Li, D. (2015b). “Engineering measures for debris flow hazard mitigation in the Wenchuan earthquake area.” Eng. Geol., 194, 73–85.
Chen, X. Q., Li, D. J., and Cui, P. (2009). “Calculating buried depth of transverse sills for the debris flow drainage groove with soft foundation.” J. HeFei Univ. Tech., 32(10), 1590–1593 (in Chinese).
Chen, X. Q., You, Y., Chen, J. G., Huang, K., and Li, D. J. (2014c). “Characteristics of a drainage channel with staggered indented sills for controlling debris flows.” J. Mt. Sci., 11(5), 1242–1252.
Chin, A. (1999). “The morphologic structure of step-pools in mountain streams.” Geomorphology, 27(3–4), 191–204.
Chin, A., et al. (2009). “Linking theory and practice for restoration of step-pool streams.” Environ. Manage., 43(4), 645–661.
Chin, A., and Wohl, E. (2005). “Toward a theory for step pools in stream channels.” Prog. Phys. Geogr., 29(3), 275–296.
Choi, C. E., Ng, C. W. W., Law, R. P. H., Song, D., Kwan, J. S. H., and Ho, K. K. S. (2015). “Computational investigation of baffle configuration on impedance of channelized debris flow.” Can. Geotech. J., 52(2), 182–197.
Choi, C. E., et al. (2014). “Flume investigation of landslide debris-resisting baffles.” Can. Geotech. J., 51(5), 540–553.
Chow, V. T. (1959). Open channel hydraulics, McGraw-Hill, New York.
Comiti, F., Andreoli, A., and Lenzi, M. A. (2005). “Morphological effects of local scouring in step-pool streams.” Earth Surf. Processes Landforms, 30(12), 1567–1581.
Comiti, F., Cadol, D., and Wohl, E. (2009). “Flow regimes, bed morphology, and flow resistance in self-formed step-pool channels.” Water Resour. Res., 45(4), W04424.
Cui, P., Zhou, G. D., Zhu, X. H., and Zhang, J. Q. (2013). “Scale amplification of natural debris flows caused by cascading landslide dam failures.” Geomorphology, 182, 173–189.
Grant, G. E., Swanson, F. J., and Wolman, M. G. (1990). “Pattern and origin of stepped-bed morphology in high-gradient streams, western Cascades, Oregon.” Geol. Soc. Am. Bull., 102(3), 340–352.
Green, K., Alila, Y., and Brardinoni, F. (2015). “Patterns of bedload entrainment and transport in forested headwater streams of the Columbia Mountains, Canada.” Earth Surf. Processes Landforms, 40(4), 427–446.
Hong, Y., Wang, J. P., Li, D. Q., Cao, Z. J., Ng, C. W. W., and Cui, P. (2015). “Statistical and probabilistic analyses of impact pressure and discharge of debris flow from 139 events during 1961 and 2000 at Jiangjia Ravine, China.” Eng. Geol., 187, 122–134.
Huang, H., Ma, D. T., and Wang, X. L. (2009). “Experimental study on the relationship between the velocity of debris flow and structure of the Dongchuan debris flow channel.” J. Mt. Sci., 27(5), 551–556 (in Chinese).
Jakob, M., and Hungr, O. (2005). Debris-flow hazards and related phenomena, Springer, Berlin.
Lenzi, M. A. (2001). “Step-pool evolution in the Rio Cordon, Northeastern Italy.” Earth Surf. Processes Landforms, 26(9), 991–1008.
Lenzi, M. A., Marion, A., and Comiti, F. (2003). “Local scouring at grade-control structures in alluvial mountain rivers.” Water Resour. Res., 39(7), 1176.
Li, D. J. (1997). Debris flow mitigation theory and practices, Science Press, Beijing.
Li, Y., Wang, B. L., Zhou, X. J., and Gou, W. C. (2015). “Variation in grain size distribution in debris flow.” J. Mountain Sci., 12(3), 682–688.
Manners, R. B., Doyle, M. W., and Small, M. J. (2007). “Structure and hydraulics of natural woody debris jams.” Water Resour. Res., 43(6), W06432.
Marion, A., Lenzi, M. A., and Comiti, F. (2004). “Effect of sill spacing and sediment size grading on scouring at grade-control structures.” Earth Surf. Processes Landforms, 29(8), 983–993.
Maxwell, A. R., and Papanicolaou, A. N. (2001). “Step-pool morphology in high-gradient streams.” Int. J. Sediment. Res., 16(3), 380–390 (in Chinese).
Montgomery, D. R., and Buffington, J. M. (1997). “Channel-reach morphology in mountain drainage basins.” Geol. Soc. Am. Bull., 109(5), 596–611.
Pan, H., Wang, R., Huang, J., and Ou, G. (2013). “Study on the ultimate depth of scour pit downstream of debris flow sabo dam based on the energy method.” Eng. Geol., 160(13), 103–109.
Spurr, K. (1985). “Energy approach to estimating scour downstream of a large dam.” Int. Water Power Dam Constr., 37(7), 81–89.
Wang, G. L. (2013). “Lessons learned from protective measures associated with the 2010 Zhouqu debris flow disaster in China.” Nat. Hazards, 69(3), 1835–1847.
Wang, J. K. (1996). Engineering techniques for debris flow prevention, China Railway Press, Beijing, China (in Chinese).
Wang, Z. Y., Cheng, D. S., He, Y. P., and Wang, H. Z. (2006). “A study of the ecological functions of step-pool system in southwest mountain streams.” Adv. Earth Sci., 21(4), 409–416 (in Chinese).
Wang, Z. Y., Qi, L., and Wang, X. (2012a). “A prototype experiment of debris flow control with energy dissipation structures.” Nat. Hazards, 60(3), 971–989.
Wang, Z. Y., Qi, L. J., and Wang, X. Z. (2012b). “Debris flow control with energy dissipation structures-experiences from Wenjiagou.” J. Hydraul. Eng., 43(3), 253–263.
Wilcox, A. C., Wohl, E. E., Comiti, F., and Mao, L. (2011). “Hydraulics, morphology, and energy dissipation in an alpine step-pool channel.” Water Resour. Res., 47(7), W07514.
Wohl, E. (2010). Mountain rivers revisited, American Geophysical Union, Washington, DC.
Wooldridge, C. L., and Hickin, E. J. (2002). “Step-pool and cascade morphology, Mosquito Creek, British Columbia: A test of four analytical techniques.” Can. J. Earth Sci., 39(4), 493–503.
Wu, S., and Rajaratnam, N. (2010). “Impinging jet and surface flow regimes at drop.” J. Hydraul. Res., 36(1), 69–74.
Wyrick, J. R., and Pasternack, G. B. (2008). “Modeling energy dissipation and hydraulic jump regime responses to channel nonuniformity at river steps.” J. Geophys. Res., 113(F3), F03003.
Xie, X. G., Wang, W., and Chen, Y. M. (1996). “Analysis on efficiencies of debris flow prevention works along Chengdu-Kunming Railway.” Mountain Res., 14(3), 199–204.
You, Y., and Liu, J. F. (2008). “The optimum cross-section design on the V-Shaped drainage channel of debris flow.” J. Mt. Sci., 26(2), 218–222.
You, Y., Pan, H. L., Liu, J. F., and Ou, G. Q. (2011). “The optimal cross-section design of the “Trapezoid-V” shaped drainage channel of viscous debris flow.” J. Mt. Sci., 8(1), 103–107.
Yu, G. A, Wang, Z. Y., Zhang, K., and Wang, F. X. (2008). “Effect of artificial step-pools on improving aquatic habitats and stream ecological in incised river channel.” J. Hydraul. Eng., 39(2), 162–167.
Yu, G. A., Huang, H. Q., Wang, Z., Brierley, G., and Zhang, K. (2012). “Rehabilitation of a debris-flow prone mountain stream in southwestern China–Strategies, effects and implications.” J. Hydrol., 414–415, 231–243.
Yu, G. A., Wang, Z. Y., Zhang, K., Duan, X., and Chang, T. C. (2010). “Restoration of an incised mountain stream using artificial step-pool system.” J. Hydraul. Res., 48(2), 178–187.
Zhang, K. P., and Lu, T. N. (2002). “Study on scouring and deposition laws of debris flow drainage trough.” Res. Soil Water Conserv., 9(4), 61–63 (in Chinese).
Zhu, Y. Y., Cui, P., Zhong, D. L., Xie, H., and Yao, L. K. (2005). “Prevention and strategy for debris flows along the highway of Xichang-Panzhihua.” J. Disaster Prev. Mitigation Eng., 25(4), 419–425 (in Chinese).
Information & Authors
Information
Published In
Copyright
©2017 American Society of Civil Engineers.
History
Received: Aug 22, 2016
Accepted: Apr 3, 2017
Published online: Jun 30, 2017
Published in print: Sep 1, 2017
Discussion open until: Nov 30, 2017
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.