How Different Cross-Sectional Shapes Influence the Separation Zone of an Open-Channel Confluence
Publication: Journal of Hydraulic Engineering
Volume 143, Issue 9
Abstract
A key feature of a schematized open-channel confluence is the separation zone that is present when the tributary flow detaches from the downstream corner of the confluence. This zone of recirculating fluid influences head losses, as well as sediment and solute balances. Most laboratory studies on the separation zone were, however, made in flumes having a rectangular cross-sectional shape. The objective of this research is therefore to elaborate on the influence of the cross-sectional shape on the flow patterns in a 90° confluence. A validated large-eddy simulation (LES) model is used to study the flow in confluences with four different cross-sectional shapes. The results indicate that the dimensions of the separation zone are significantly different for nonrectangular shapes due to lateral currents that might reduce the local momentum deficit. This study contributes to finding the optimal shape of artificial confluences with respect to head losses, as well as to understanding the flow processes that are present in a confluence.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The anonymous reviewers and associate editor are gratefully acknowledged for their thorough revision. The first author is a Ph.D. fellow of the Research Foundation—Flanders. The second author is a Ph.D. fellow of the Special Research Fund (BOF) of Ghent University. The computational resources (Stevin Supercomputer Infrastructure) and services used in this work were provided by the VSC (Flemish Supercomputer Center), funded by Ghent University, the Hercules Foundation, and the Flemish Government Department of Economy, Science and Innovation (Department EWI).
References
Anwar, H. (1955). “Strömungsverhältnisse bei Flußvereinigungen [Flow conditions at joining channels].” Ph.D. thesis, TH Karlsruhe, Karlsruhe, Germany (in German).
Arega, F., Lee, J. H., and Tang, H.-W. (2008). “Hydraulic jet control for river junction design of Yuen Long Bypass Floodway, Hong Kong.” J. Hydraul. Eng., 23–33.
Ashmore, P. E., Ferguson, R. I., Prestegaard, K. L., Ashworth, P. J., and Paola, C. (1992). “Secondary flow in anabranch confluences of a braided, gravel-bed stream.” Earth Surf. Processes Landforms, 17(3), 299–311.
Behrangi, A., Borghei, S., and Daemi, A. (2005). “Sub-critical flow in open channel junction.” Hydraulics of dams and river structures, F. Yazdandoost and J. Attari, eds., A.A. Balkema, Leiden, Netherlands, 522–533.
Best, J. (1985). “Flow dynamics and sediment transport at river channel confluences.” Ph.D. thesis, Univ. of London, London.
Best, J., and Reid, I. (1984). “Separation zone at open-channel junctions.” J. Hydraul. Eng., 1588–1594.
Biron, P., Best, J., and Roy, A. (1996a). “Effects of bed discordance on flow dynamics at open channel confluences.” J. Hydraul. Eng., 676–682.
Biron, P., Ramamurthy, A. S., and Han, S. (2004). “Three-dimensional numerical modelling of mixing at river confluences.” J. Hydraul. Eng., 243–253.
Biron, P., Roy, A. G., and Best, J. L. (1996b). “Turbulent flow structure at concordant and discordant open-channel confluences.” Exp. Fluids, 21(6), 437–446.
Blanckaert, K., Duarte, A., and Schleiss, A. (2010). “Influence of shallowness, bank inclination and bank roughness on the variability of flow patterns and boundary shear stress due to secondary currents in straight open-channels.” Adv. Water Res., 33(9), 1062–1074.
Bradbrook, K. F., Lane, S. N., Richards, K. S., Biron, P. M., and Roy, A. G. (2000). “Large eddy simulation of periodic flow characteristics at river channel confluences.” J. Hydraul. Res., 38(3), 207–215.
Bradbrook, K. F., Lane, S. N., Richards, K. S., Biron, P. M., and Roy, A. G. (2001). “Role of bed discordance at asymmetrical river confluences.” J. Hydraul. Eng., 351–368.
Chanson, H. (2004). Hydraulics of open channel flow, 2nd Ed., Butterworth-Heinemann, Oxford, U.K.
Constantinescu, G., Miyawaki, S., Rhoads, B., Sukhodolov, A., and Kirkil, G. (2011). “Structure of turbulent flow at a river confluence with momentum and velocity ratios close to 1: Insight provided by an eddy-resolving numerical simulation.” Water Resour. Res., 47(5), W05507.
Coussement, A., Gicquel, O., and Degrez, G. (2012). “Large eddy simulation of a pulsed jet in cross-flow.” J. Fluid Mech., 695, 1–34.
Creëlle, S., Schindfessel, L., and De Mulder, T. (2016). “Experimental determination of free surface levels at open-channel junctions.” J. Hydraul. Res., 54(2), 227–230.
Creëlle, S., Schindfessel, L., and De Mulder, T. (2017). “Modelling of the tributary momentum contribution to predict confluence head losses.” J. Hydraul. Res., 55(2), 175–189.
Dordevic, D. (2012). “Role of bed elevation discordance at 90° straight channel confluences.” Proc., Int. Conf. on Fluvial Hydraulics—River Flow 2012, R. E. M. Munoz, ed., ASCE, Reston, VA, 2277–2286.
Gurram, S. K., Karki, K. S., and Hager, W. H. (1997). “Subcritical junction flow.” J. Hydraul. Eng., 447–455.
Hager, W. H. (1987). “Discussion of ‘Separation zone at open-channel junctions’.” J. Hydraul. Eng., 539–543.
Hager, W. H. (1989). “Transitional flow in channel junctions.” J. Hydraul. Eng., 243–259.
Hinze, J. (1959). Turbulence, McGraw-Hill Book Company, Inc., New York.
Hsu, C., Wu, F., and Lee, W. (1998). “Flow at 90° equal-width open-channel junction.” J. Hydraul. Eng., 186–191.
Huang, J. (2000). “Development and validation of a three-dimensional numerical model for application to river flow.” Ph.D. thesis, Univ. of Iowa, Iowa City, IA.
Leclair, S., and Roy, A. (1997). “Variabilité de la morphologie et des structures sédimentaires du lit d’un confluent de cours d’eau discordant en période d’étiage [Variability of bed morphology and sedimentary structures at a discordant river confluence during low flows].” Géographie. Phys. Quat., 51(2), 125–139 (in French).
Leite Ribeiro, M., Blanckaert, K., Roy, A. G., and Schleiss, A. J. (2012). “Flow and sediment dynamics in channel confluences.” J. Geophys. Res. Earth Surf., 117(F1), F01035.
Mamedov, A. (1989). “Hydraulic calculation of a confluence.” Hydrotech. Constr. Translated Russ., 23(9), 553–556.
McLelland, S., Ashworth, P., and Best, J. (1996). “The origin and downstream development of coherent flow structures at channel junctions.” Coherent flow structures in open channels, P. Ashworth, S. Bennett, J. Best, and S. McLelland, eds., Wiley, Hoboken, NJ, 459–489.
Mignot, E., et al. (2012). “Experiments and 3D simulations of flow structures in junctions and their influence on location of flowmeters.” Water Sci. Technol., 66(6), 1325–1332.
Mohammadiun, S., Salehi Neyshabouri, S., Naser, G., Parhizkar, H., and Vahabi, H. (2015). “Effects of open-channel geometry on flow pattern in a 90° junction.” Iran. J. Sci. Technol. Trans. Civil Eng., 39(2), 559–573.
OpenFOAM version 2.2.2 [Computer software]. OpenFOAM Foundation, London.
Pandey, A. K., and Mishra, R. (2012). “Comparison of flow characteristics at rectangular and trapezoidal channel junctions.” J. Phys. Conf. Ser., 364(1), 012141.
Pinto Coelho, M. M. L. (2015). “Experimental determination of free surface levels at open-channel junctions.” J. Hydraul. Res., 53(3), 394–399.
Pope, S. B. (2004). “Ten questions concerning the large-eddy simulation of turbulent flows.” New J. Phys., 6(1), 35.
Qing-Yuan, Y., Xian-Ye, W., Wei-Zhen, L., and Xie-Kang, W. (2007). “Experimental study on characteristics of separation zone in confluence zones in rivers.” J. Hydrol. Eng., 166–171.
Ramamurthy, A., Carballada, L., and Tran, D. (1989). “Combining open channel flow at right angled junctions.” J. Hydraul. Eng., 1449–1460.
Rhoads, B. L., and Sukhodolov, A. N. (2001). “Field investigation of three-dimensional flow structure at stream confluences: 1. Thermal mixing and time-averaged velocities.” Water Resour. Res., 37(9), 2393–2410.
Rhoads, B. L., and Sukhodolov, A. N. (2008). “Lateral momentum flux and the spatial evolution of flow within a confluence mixing interface.” Water Resour. Res., 44(8), W08440.
Rodi, W., Constantinescu, G., and Stoesser, T. (2013). Large-eddy simulation in hydraulics, CRC Press/Balkema, Leiden, Netherlands.
Roy, A. G., and Bergeron, N. (1990). “Flow and particle paths at a natural river confluence with coarse bed material.” Geomorphology, 3(2), 99–112.
Roy, A. G., Roy, R., and Bergeron, N. (1988). “Hydraulic geometry and changes in flow velocity at a river confluence with coarse bed material.” Earth Surf. Processes Landforms, 13(7), 583–598.
Sagaut, P. (2006). Large eddy simulation for incompressible flows, 3rd Ed., Springer, Berlin.
Schindfessel, L., Creëlle, S., Boelens, T., and De Mulder, T. (2014). “Flow patterns in an open channel confluence with a small ratio of main channel to tributary discharge.” Proc., Int. Conf. on Fluvial Hydraulics—River Flow 2014, A. Schleiss, G. De Cesare, M. Franca, and M. Pfister, eds., Taylor & Francis Group, Park Drive, U.K., 989–996.
Schindfessel, L., Creëlle, S., and De Mulder, T. (2015). “Flow patterns in an open channel confluence with increasingly dominant tributary inflow.” Water, 7(9), 4724–4751.
Shumate, E. (1998). “Experimental description of flow at an open-channel junction.” M.S. thesis, Univ. of Iowa, Iowa City, IA.
Taylor, E. (1944). “Flow characteristics at rectangular open-channel junctions.” Trans. ASCE, 109(1), 893–902.
Tominaga, A., Nezu, I., Ezaki, K., and Nakagawa, H. (1989). “Three-dimensional turbulent structure in straight open channel flows.” J. Hydraul. Res., 27(1), 149–173.
Webber, N. B., and Greated, C. A. (1966). “An investigation of flow behaviour at the junction of rectangular channels.” Proc. Inst. Civ. Eng., 34(3), 321–334.
Yoshimura, H., Moriguchi, R., and Fujita, I. (2015). “Numerical and experimental study of three dimensional flow structures and water surface fluctuations at a right-angled confluence.” Proc., 36th IAHR World Congress, International Association for Hydro-Environment Engineering and Research, Madrid, Spain.
Information & Authors
Information
Published In
Copyright
©2017 American Society of Civil Engineers.
History
Received: Jul 6, 2016
Accepted: Feb 28, 2017
Published online: Jun 26, 2017
Published in print: Sep 1, 2017
Discussion open until: Nov 26, 2017
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.