Embankment Failures during the Historic October 2015 Flood in South Carolina: Case Study
Publication: Journal of Hydraulic Engineering
Volume 143, Issue 8
Abstract
The collection of time-sensitive data on real-life embankment failures and their analysis are essential steps to model breach processes and the consequential flood, which are of great importance for preparing emergency action plans. In this paper, data on 14 earthen embankments that failed or were damaged in the Midlands of South Carolina resulting from the historic 1,000-year storm during October 2015 are presented and analyzed. The investigation includes measurement of breach dimensions, collection of undisturbed soil samples, soil classification, embankment erodibility tests using the submerged jet erosion test (JET) method, calculation of peak discharge, estimation of maximum height of overtopping, and calculation of maximum reservoir volume behind each embankment at the time of failure. Using this information and results, single-variable and multivariable parametric breach models for the breach depth and breach width are developed and compared with selected breach models available in the literature. All the models except for one estimate the breach width satisfactorily, with the proposed single-variable equation giving a relatively better prediction. The collected data set of this study may be used by others for model verification.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors express their thanks to the Office of the Vice President for Research, University of South Carolina, under South Carolina Flood Project (Grant 15520E216), and to the National Science Foundation under the Partnerships for International Research and Education (PIRE) project (Grant 0730246) and Rapid Response Research (RAPID) project (Grant 1068116) for the financial support. Any opinions, findings, and conclusions or recommendations expressed in this material are those of the authors and do not necessarily reflect the views of the National Science Foundation. The paper benefited from the helpful suggestions of the anonymous reviewers.
References
Akan, A. O., and Houghtalen, R. K. (2003). Urban hydrology, hydraulics, and stormwater quality: Engineering applications and computer modeling, Wiley, Hoboken, NJ, 94–146.
ArcGIS [Computer software]. ESRI, Redlands, CA.
ArcMap [Computer software]. ESRI, Redlands, CA.
ASCE/EWRI Task Committee on Dam/Levee Breaching. (2011). “Earthen embankment breaching.” J. Hydraul. Eng., 1549–1564.
ASTM. (2011). “Standard practice for classification of soils for engineering purposes (unified soil classification system).” ASTM D2487-11, West Conshohocken, PA.
Babb, A. O., and Mermel, T. W. (1968). Catalog of dam disasters, failures and accidents, U.S. Dept. of the Interior, Bureau of Reclamation, Washington, DC.
Bonnin, G., Martin, D., Lin, B., Parzybok, T., Yekta, M., and Riley, D. (2006). “NOAA Atlas 14 volume 3, precipitation-frequency atlas of the United States, Puerto Rico and the U.S. Virgin Islands.” National Oceanic and Atmospheric Administration, National Weather Service, Silver Spring, MD.
Costa, J. E. (1985). “Floods from dam failures.”, USGS, Denver.
Devereaux, J. R. (2016). “Gills creek watershed: Assessment of regulated dams.” ⟨http://www.scdhec.gov/HomeAndEnvironment/Docs/DamUpdates/Gills_Creek_Report_Final.pdf⟩ (Apr. 15, 2016).
Evans, S. G. (1986). “The maximum discharge of outburst floods caused by the breaching of man-made and natural dams.” Can. Geotech. J., 23(3), 385–387.
Froehlich, D. C. (1995). “Embankment dam breach parameters revisited.” Proc., 1995 Conf. on Water Resources Engineering, ASCE, New York, 887–891.
Gills Creek Watershed Association. (2015). “2014–2015 annual report.” ⟨http://www.gillscreekwatershed.org/documents/GCWA_Annual_Report_2015.pdf⟩ (May 20, 2016).
Hagen, V. K. (1982). “Re-evaluation of design floods and dam safety.” Proc., 14th Congress of Int. Commission on Large Dams, Paris.
Hanson, G. J., and Cook, K. R. (2004). “Apparatus, test procedures and analytical methods to measure soil erodibility in situ.” Appl. Eng. Agric., 20(4), 455–462.
Hanson, G. J., and Simon, A. (2001). “Erodibility of cohesive streambeds in the loess area of the midwestern USA.” Hydrol. Process., 15(1), 23–38.
Homer, C. G., et al. (2015). “Completion of the 2011 National Land Cover Database for the conterminous United States—Representing a decade of land cover change information.” Photogramm. Eng. Remote Sens., 81(5), 345–354.
Jarrett, R. D., and Costa, J. E. (1986). “Hydrology, geomorphology, and dambreak modeling of the July 15, 1982 Lawn Lake Dam and Cascade Lake Dam failures, Larimer County, Colorado.”, USGS, Denver.
MacDonald, T. C., and Langridge-Monopolis, J. (1984). “Breaching characteristics of dam failures.” J. Hydraul. Eng., 567–586.
Morris, M. W., Kortenhaus, A., Visser, P. J., and Hassan, M. A. A. M. (2009). “Breaching processes: A state of the art review.” ⟨http://repository.tudelft.nl/islandora/object/uuid:a8276efd-5dc7-4e02-9d5a-a912c1504b65?collection=research⟩ (Apr. 15, 2016).
National Oceanic and Atmospheric Administration. (2015). “Climate report national weather service Columbia SC.” ⟨http://w2.weather.gov/climate/index.php?wfo=cae⟩ (Apr. 26, 2016).
Natural Resources Conservation Service. (2011). “Web soil survey.” ⟨http://websoilsurvey.nrcs.usda.gov⟩ (Apr. 25, 2016).
NID (National Inventory of Dams). (2013). “NID interactive report.” ⟨http://nid.usace.army.mil/cm_apex/f?p=838:12⟩ (Sep. 26, 2016).
Partnerships for International Research and Education. (2017). “Impacts of levee breach and dam failure.” Univ. of South Carolina, ⟨http://pire.ce.sc.edu⟩ (Feb. 26, 2017).
Pierce, M. W., Thornton, C. I., and Abt, S. R. (2010). “Predicting peak outflow from breached embankment dams.” J. Hydrol. Eng., 338–349.
Ponce, V. M. (1982). “Documented cases of earth dam breaches.”, San Diego State Univ., San Diego.
SCS (Soil Conservation Service). (1981). “Simplified dam-breach routing procedure.”, Washington, DC.
SCS (Soil Conservation Service). (1986). “Urban hydrology for small watersheds.”, Washington, DC.
Singh, K. P., and Snorrason, A. (1984). “Sensitivity of outflow peaks and flood stages to the selection of dam breach parameters and simulation models.” J. Hydrol., 68(1–4), 295–310.
USBR (U.S. Bureau of Reclamation). (1988). “Downstream hazard classification guidelines.”, U.S. Dept. of the Interior, Denver.
USGS. (2012). “USGS water data for the nation.” ⟨http://waterdata.usgs.gov/nwis/⟩ (Apr. 20, 2016).
Wahl, T. L. (1998). “Prediction of embankment dam breach parameters: A literature review and needs assessment.”, Bureau of Reclamation, U.S. Dept. of the Interior, Denver.
Wahl, T. L., et al. (2008). “Development of next-generation embankment dam breach models.” Proc., USSD Conf., U.S. Society on Dams, Denver.
Xu, Y., and Zhang, L. M. (2009). “Breaching parameters for earth and rockfill dams.” J. Geotech. Geoenviron. Eng., 1957–1970.
Information & Authors
Information
Published In
Copyright
©2017 American Society of Civil Engineers.
History
Received: Jun 6, 2016
Accepted: Jan 6, 2017
Published online: Mar 29, 2017
Published in print: Aug 1, 2017
Discussion open until: Aug 29, 2017
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.