CFD Approach for Column Separation in Water Pipelines
Publication: Journal of Hydraulic Engineering
Volume 142, Issue 10
Abstract
Liquid column separation (LCS) in pressurized pipelines may occur if a water hammer event drops the local pressure to the liquid’s vapor point. Numerical simulations of LCS have traditionally been based on one-dimensional (1D) transient flow theory; here, a two-dimensional (2D) computational fluid dynamics (CFD) model is used to investigate the complicated nature of LCS and to help characterize the limitations of the traditional 1D models. To this end, the Schnerr–Sauer cavitation model with a shear-stress transport (SST) turbulence model is employed, whereas the Unsteady Reynolds-Averaged Navier-Stokes (URANS) equations are solved for the mixture of liquid and vapor. 2D model results are compared to both experimental data and to those of the 1D discrete vapor-cavity model (DVCM), thus demonstrating that the 2D method effectively simulates the pressure variations while helping to visualize the associated physical processes. More specifically, the 2D simulations vividly reveal the growth and the collapse of the cavity, including the formation of an intermediate cavity and both the location and shape of the region undergoing distributed vaporous cavitation.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The writers gratefully acknowledge the financial support for this research from the National Natural Science Foundation of China (Grant No. 51209073), the Fundamental Research Funds for the Central Universities (Grant Nos. 2015B15414 and 2015B34214), and the Specialized Research Fund for the Doctoral Program of Higher Education of China (Grant No. 20120094120002).
References
ANSYS FLUENT [Computer software]. ANSYS, Canonsburg, PA.
Bergant, A., and Simpson, A. R. (1992). Interface model for transient cavitating flow in pipelines, CRC Press, Rotterdam, Netherlands.
Bergant, A., and Simpson, A. R. (1995). “Water hammer and column separation measurements in an experimental apparatus.” Dept. of Civil and Environmental Engineering, Univ. of Adelaide, Adelaide, Australia.
Bergant, A., and Simpson, A. R. (1999). “Pipeline column separation flow regimes.” J. Hydraul. Eng., 835–848.
Bergant, A., Simpson, A. R., and Tijsseling, A. S. (2006). “Water hammer with column separation: A historical review.” J. Fluids Struct., 22(2), 135–171.
Bergant, A., Simpson, A. R., and Vítkovský, J. P. (2001). “Developments in unsteady pipe flow friction modelling.” J. Hydraul. Res., 39(3), 249–257.
Bergant, A., Tijsseling, A. S., Vítkovský, J. P., Covas, D. I. C., Simpson, A. R., and Lambert, M. F. (2008). “Parameters affecting water-hammer wave attenuation, shape and timing—Part 2: Case studies.” J. Hydraul. Res., 46(3), 382–391.
Bonin, C. C. (1960). “Water-hammer damage to Oigawa power station.” J. Eng. Gas Turbines Power, 82(2), 111–116.
Brennen, C. E. (1995). Cavitation and bubble dynamics, Oxford University Press, Oxford, U.K.
Cannizzaro, D., and Pezzinga, G. (2005). “Energy dissipation in transient gaseous cavitation.” J. Hydraul. Eng., 724–732.
Chunekar, A. R. (2009). “Numerical modeling and simulation of turbulence-cavitation interactions in a Venturi geometry.” Master’s thesis, Purdue Univ., West Lafayette, IN.
Compaq Visual FORTRAN 6.5 [Computer software]. Compaq Computer Corporation, Houston.
Coutier-Delgosha, O., Fortes-Patella, R., and Reboud, J. L. (2003a). “Evaluation of the turbulence model influence on the numerical simulations of unsteady cavitation.” J. Fluids Eng., 125(1), 38–45.
Coutier-Delgosha, O., Fortes-Patella, R., and Reboud, J.-L. (2002). “Simulation of unsteady cavitation with a two-equation turbulence model including compressibility effects.” J. Turbul., 3(1), N58–65.
Coutier-Delgosha, O., Reboud, J. L., and Delannoy, Y. (2003b). “Numerical simulation of the unsteady behaviour of cavitating flows.” Int. J. Numer. Methods Fluids, 42(5), 527–548.
Frikha, S., Coutier-Delgosha, O., and Astolfi, J. A. (2008). “Influence of the cavitation model on the simulation of cloud cavitation on 2D foil section.” Int. J. Rotating Mach., 2008, 1–12.
Joukowsky, N. (1900). “Über den hydraulischen Stoss in Wasserleitungsrohren.” Mémoires de l'Académie Impériale des Sciences de St.-Pétersbourg, Series 8, 9(5), 1–71 (in German).
Kunz, R. F., Boger, D. A., Chyczewski, T. S., Stinebring, D., Gibeling, H., and Govindan, T. (1999). “Multi-phase CFD analysis of natural and ventilated cavitation about submerged bodies.” Proc., 3rd ASME/JSME Joint Fluids Engineering Conf. (FEDSM’99), American Society of Mechanical Engineers, New York.
Li, D., Grekula, M., and Lindell, P. (2009). “A modified SST k-ω turbulence model to predict the steady and unsteady sheet cavitation on 2D and 3D hydrofoils.” Proc., 7th Int. Symp. on Cavitation, Univ. of Michigan, MI, 16–20.
Li, Z.-R., Pourquie, M., and Van Terwisga, T. J. C. (2010). “A numerical study of steady and unsteady cavitation on a 2D hydrofoil.” J. Hydrodyn., 22(5), 728–735.
List, E., Burnam, J., Solbrig, R., and Hogatt, J. (1999). “Vapor cavity formation and collapse: Field evidence for major pipeline damage.” Proc., 3rd ASME/JSME Joint Fluids Engineering Conf., Symp. S-290 Water Hammer, American Society of Mechanical Engineers, New York.
Malekpour, A., and Karney, B. (2014). “Column separation and rejoinder during rapid pipeline filling induced by a partial flow blockage.” J. Hydraul. Res., 52(5), 693–704.
Margot, X., Hoyas, S., Gil, A., and Patouna, S. (2012). “Numerical modelling of cavitation: Validation and parametric studies.” Eng. Appl. Comp. Fluid Mech., 6(1), 15–24.
Martin, C. S. (1983). “Experimental investigation of column separation with rapid closure of downstream valve.” Proc., 4th Int. Conf. on Pressure Surges, BHRA, Bath, U.K., 77–88.
Menter, F. R. (1994). “Two-equation eddy-viscosity turbulence models for engineering applications.” AIAA J., 32(8), 1598–1605.
Mohan, B., Yang, W., and Chou, S. (2014). “Cavitation in injector nozzle holes—A parametric study.” Eng. Appl. Comp. Fluid Mech., 8(1), 70–81.
Mosharaf Dehkordi, M., and Firoozabadi, B. (2010). “Effects of unsteady friction factor on gaseous cavitation model.” Scientia Iranica Trans. B. Mech. Eng., 17(1B), 13–24.
Pezzinga, G. (1999). “Quasi-2D model for unsteady flow in pipe networks.” J. Hydraul. Eng., 676–685.
Pezzinga, G. (2003). “Second viscosity in transient cavitating pipe flows.” J. Hydraul. Res., 41(6), 656–665.
Pezzinga, G., and Cannizzaro, D. (2014). “Analysis of transient vaporous cavitation in pipes by a distributed 2D model.” J. Hydraul. Eng., 04014019.
Provoost, G., and Wylie, E. B. (1982). “Discrete gas model to represent distributed free gas in liquids.” Proc., 5th Int. Symp. on Water Column Separation, IAHR, Obernach, Germany, 28–30.
Reboud, J.-L., Stutz, B., and Coutier, O. (1998). “Two phase flow structure of cavitation: Experiment and modeling of unsteady effects.” Proc., 3rd Int. Symp. on Cavitation, EPFL(ÉCOLE POLYTECHNIQUE FÉDÉRALE DE LAUSANNE), Lausanne, Switzerland.
Sadafi, M., Riasi, A., and Nourbakhsh, S. A. (2012). “Cavitating flow during water hammer using a generalized interface vaporous cavitation model.” J. Fluids Struct., 34, 190–201.
Schnerr, G., and Sauer, J. (2001). “Physical and numerical modeling of unsteady cavitation dynamics.” Proc., 4th Int. Conf. on Multiphase Flow, FIZ Karlsruhe, Eggenstein-Leopoldshafen, Germany.
Simpson, A. R. (1986). “Large water hammer pressures due to column separation in sloping pipes.” Ph.D. thesis, Dept. of Civil Engineering, Univ. of Michigan, Ann Arbor, MI.
Simpson, A. R., and Bergant, A. (1994). “Numerical comparison of pipe-column-separation models.” J. Hydraul. Eng., 361–377.
Singhal, A. K., Athavale, M. M., Li, H. Y., and Jiang, Y. (2002). “Mathematical basis and validation of the full cavitation model.” J. Fluids Eng., 124(3), 617–624.
Streeter, V. (1983). “Transient cavitating pipe flow.” J. Hydraul. Eng., 1407–1423.
Timperi, A., Pättikangas, T., Calonius, K., Tuunanen, J., Poikolainen, J., and Saarenheimo, A. (2004). Numerical analyses of a water pool under loadings caused by a condensation induced water hammer, Nordisk Kernesikkerhedsforskning, Roskilde, Denmark.
Wylie, E., and Streeter, V. (1978a). “Column separation in horizontal pipelines.” Proc., Joint Symp. on Design and Operation of Fluid Machinery, IAHR/ASME/ASCE, Colorado State Univ., Fort Collins, CO, 3–13.
Wylie, E. B. (1997). “Frictional effects in unsteady turbulent pipe flows.” Appl. Mech. Rev., 50(11), S241–S244.
Wylie, E. B., and Streeter, V. L. (1978c). Fluid transients, McGraw-Hill, New York.
Information & Authors
Information
Published In
Copyright
© 2016 American Society of Civil Engineers.
History
Received: Aug 31, 2015
Accepted: Mar 7, 2016
Published online: May 25, 2016
Published in print: Oct 1, 2016
Discussion open until: Oct 25, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.