Simplistic Design Methods for Moderate-Sloped Stepped Chutes
Publication: Journal of Hydraulic Engineering
Volume 140, Issue 12
Abstract
Numerous research contributions have been made on the hydraulic properties for steep, stepped chutes. Stepped chutes applied to more moderate slopes like those for aging embankment dams are a growing trend, and research activities as a result have increased in this arena. Although numerous stepped chute design guidelines are available, some of them are complicated and somewhat cumbersome to use. A multiyear, large-scale physical model study was conducted for a broad range of step height () to critical flow depth () ratio and chute slope () (i.e., and ). The objectives of the study were to (1) evaluate the step height to critical flow depth ratio and the chute slope affect on the surface inception point, clear water and bulked flow depth, air concentration, and energy coefficient; and (2) develop practical, straight-forward design relationships for practicing engineers. Detailed flow measurements were collected during testing, and the results were compared in terms of free-surface inception point, air-water flow properties, and energy dissipation. Free-surface inception point relationships were validated for a broader range of use. Relationships for air concentration, clear water flow depth, and energy coefficient were developed, and findings showed these relationships are a function of (1) the length from the downstream edge of the broad-crested weir to the point of interest to the characteristic length from the downstream edge of the broad-crested weir to the free-surface inception point () ratio, (2) the step height to critical flow depth () ratio, and/or (3) the chute slope ().
Get full access to this article
View all available purchase options and get full access to this article.
References
Boes, R. M. (2000a). “Scale effects in modeling two-phase stepped spillway flow.” Proc., Workshop Hydraulics of Stepped Spillways, H. E. Minor and W. H. Hager, eds., Balkema, Rotterdam, Netherlands, 53–60.
Boes, R. M. (2000b). “Two-phase flow and energy dissipation on stepped spillways.” Proc., Association of Dam Safety Officials Annual Meeting, ASDSO, Lexington, KY.
Boes, R. M. (2000c). “Zweiphasenströmung und energieumsetzung auf grosskaskaden.” Ph.D. thesis, Swiss Federal Institute of Technology in Zurich (ETHZ), Zürich, Switzerland (in German).
Boes, R. M., and Hager, W. H. (1998). “Fiber-optical experimentation in two-phase cascade flow.” Proc., Int. RCC Dams Seminar, K. Hanson, ed., Schnabel Engineering, Denver.
Boes, R. M., and Hager, W. H. (2003). “Two-phase flow characteristics of stepped spillways.” J. Hydraul. Eng., 661–670.
Boes, R. M., and Minor, H. R. (2000). “Guidelines for the hydraulic design of stepped spillways.” Proc., Workshop Hydraulics of Stepped Spillways, H. E. Minor, and W. H. Hager, eds., Balkema, Rotterdam, Netherlands, 163–170.
Bung, D. B. (2011). “Developing flow in skimming flow regime on embankment stepped spillways.” J. Hydraul. Res., 49(5), 639–648.
Carosi, G., and Chanson, H. (2006). “Air-water time and length scales in skimming flows on a stepped spillway. Application to the spray characterisation.”, Div. of Civil Engineering, Univ. of Queensland, Brisbane, Australia.
Carosi, G., and Chanson, H. (2008). “Turbulence characteristics in skimming flows on stepped spillways.” Can. J. Civ. Eng., 35(9), 865–880.
Chamani, M. R. (2000). “Air inception in skimming flow regime over stepped spillways.” Proc., 1st Int. Workshop on Hydraulics of Stepped Spillway, A. A. Balkema Publishers, Rotterdam, Netherlands, 61–67.
Chanson, H. (1993). “Stepped spillway flow and air entrainment.” Can. J. Civ. Eng., 20(3), 422–435.
Chanson, H. (1994). “Hydraulics of skimming flows over stepped channels and spillways.” J. Hydraul. Res., 32(3), 445–460.
Chanson, H. (2000). “Discussion of characteristics of skimming flow over stepped spillways.” J. Hydraul. Eng., 860–873.
Chanson, H. (2002). The hydraulics of stepped chutes and spillways, A. A. Balkema Publishers, Steenwijk, Netherlands.
Chanson, H., and Toombes, L. (2002a). “Air-water flows down stepped chutes: Turbulence and flow structure observations.” Int. J. Multiphase Flow, 28(11), 1737–1761.
Chanson, H., and Toombes, L. (2002b). “Energy dissipation and air entrainment in a stepped storm waterway: An experimental study.” J. Irrig. Drain. Eng., 305–315.
Chanson, H., and Toombes, L. (2004). “Hydraulics of stepped chutes: The transition flow.” J. Hydraul Res. 42(1), 43–54.
Chow, V. T. (1959). Open-channel hydraulics, McGraw-Hill, Boston, MA.
Felder, S. (2013). “Air-water flow properties on stepped spillways for embankment dams: Aeration, energy dissipation and turbulence on uniform, non-uniform and pooled stepped chutes.” Ph.D. thesis, Univ. of Queensland, Brisbane, Australia.
Felder, S., and Chanson, H. (2008). “Turbulence and turbulent length and time scales in skimming flows on a stepped spillway. Dynamic similarity physical modeling and scale effects.”, Hydraulic Model Report CH series, Div. of Civil Engineering, Univ. of Queensland, Brisbane, Australia.
Felder, S., and Chanson, H. (2009). “Energy dissipation, flow resistance and gas-liquid interfacial area in skimming flows on moderate-slope stepped spillways.” Environ. Fluid Mech., 9(4), 427–441.
Felder, S., and Chanson, H. (2011). “Energy dissipation down a stepped spillway with nonuniform step heights.” J. Hydraul. Eng., 1543–1548.
Felder, S., and Chanson, H. (2013). “Aeration, flow instabilities, and residual energy on pooled stepped spillways of embankment dams.” J. Irrig. Drain. Eng., 880–887.
Frizell, K. W., and Svoboda, C. D. (2012). “Performance of type III stilling basins—Stepped spillway studies—Do stepped spillways affect traditional design parameters?” Hydraulic Laboratory Rep. HL-2012-02, United States Dept. of the Interior, Bureau of Reclamation, Denver.
Gonzalez, C. (2005). “An experimental study of free-surface aeration on embankment stepped chutes.” Ph.D. thesis, Univ. of Queensland, Brisbane, Australia.
Gonzalez, C. A., and Chanson, H. (2007). “Hydraulic design of stepped spillways and downstream energy dissipators for embankment dams.” Dam Eng., 17(4), 223–244.
Hunt, S. L., and Kadavy, K. C. (2009). “Energy dissipation for flat-sloped stepped spillways using new inception point relationship.” Proc., Association of Dam Safety Officials Annual Meeting, ASDSO, Lexington, KY.
Hunt, S. L., and Kadavy, K. C. (2010a). “Energy dissipation for flat-sloped stepped spillways: Part I. Upstream of the inception point.” Trans. ASABE, 53(1), 103–109.
Hunt, S. L., and Kadavy, K. C. (2010b). “Energy dissipation for flat-sloped stepped spillways: Part II. Downstream of the inception point.” Trans. ASABE, 53(1), 111–118.
Hunt, S. L., and Kadavy, K. C. (2011a). “Inception point relationship for flat-sloped stepped spillways.” J. Hydraul. Eng., 262–266.
Hunt, S. L., and Kadavy, K. C. (2011b). “One step at a time: Developing design criteria for stepped spillways.” Proc., Association of Dam Safety Officials Annual Meeting, ASDSO, Lexington, KY.
Hunt, S. L., Kadavy, K. C., and Hanson, G. J. (2012a). “A step in the right direction: New flow depth relationships for stepped spillways.” Proc., Association of Dam Safety Officials Annual Meeting, ASDSO, Lexington, KY.
Hunt, S. L., Temple, D. M., Abt, S. R., Kadavy, K. C., and Hanson, G. J. (2012b). “Converging stepped spillways: Simplified momentum analysis approach.” J. Hydraul. Eng., 796–802.
Hunt, S. L., and Kadavy, K. C. (2013). “Inception point for embankment dam stepped spillways.” J. Hydraul. Eng., 60–64.
Hunt, S. L., Kadavy, K. C., and Hanson, G. J. (2013). “New flow depth relationships for embankment dam stepped spillway design.” Dam Eng., XXIV(1), 53–70.
Matos, J. (2000). “Hydraulic design of stepped spillways over RCC dams.” Proc., 1st Int. Workshop on Hydraulics of Stepped Spillways, A. A. Balkema Publishers, Rotterdam, Netherlands, 187–194.
Matos, J. (2003). “Roller compacted concrete and stepped spillways. From new dams to dam rehabilitation.” Proc., Int. Congress on Conservation and Rehabilitation of Dams: Dam Maintenance and Rehabilitation, J. A. Llanos, J. Yague, F. Saenz de Ormijana, M. Cabera, and J. Penas, eds., A. A. Balkema, Rotterdam, Netherlands, 553–560.
Matos, J., Frizell, K. H., André, S., and Frizell, K. W. (2002). “On performance of velocity measurement techniques in air-water flows.” Proc., Hydraulic Measurements and Experimental Methods, ASCE, T. L. Wahl, C. A. Pugh, K. A. Oberg, and T. B. Vermeyen, eds., Estes Park, CO.
Meireles, I., and Matos, J. (2009). “Skimming flow in the nonaerated region of stepped spillways over embankment dams.” J. Hydraul. Eng., 685–689.
Meireles, I., Renna, F., Matos, J., and Bombardelli, F. (2012). “Skimming, non-aerated flow on stepped spillways over RCC dams.” J. Hydraul. Eng., 870–877.
Ohtsu, I., Yasuda, Y., and Takahashi, M. (2001). “Discussion of ‘onset of skimming flow on stepped spillways.’” J. Hydraul. Eng., 519–525.
Ohtsu, I., Yasuda, Y., and Takahashi, M. (2004). “Flow characteristics of skimming flows in stepped channels.” J. Hydraul. Eng., 860–869.
Pfister, M., and Hager, W. H. (2011). “Self-entrainment of air on stepped spillways.” Int. J. Multiphase Flow, 37(2), 99–107.
Portland Cement Association (PCA). (2002). Design manual for RCC spillways and overtopping protection, Portland Cement Association, Skokie, IL.
Takahashi, M., and Ohtsu, I. (2012). “Aerated flow characteristics of skimming flow over stepped chutes.” J. Hydraul. Res., 50(4), 427–434.
Toombes, L., and Chanson, H. (2007). “Surface waves and roughness in self-aerated supercritical flow.” Environ. Fluid Mech., 7(3), 259–270.
U.S. Department of the Interior Bureau of Reclamation (USBR). (1973). Design of small dams, U.S. Government Printing Office, Denver.
Ward, J. (2002). “Hydraulic design of stepped spillways.” Ph.D. dissertation, Colorado State Univ., Ft. Collins, CO.
Yasuda, Y., and Ohtsu, I. (2003). “Micro- and macro-scopic study of two-phase flow on a stepped chute.” Proc., 28th IAHR Congress, Thessaloniki, Greece, 695–702.
Information & Authors
Information
Published In
Journal of Hydraulic Engineering
Volume 140 • Issue 12 • December 2014
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Sep 25, 2013
Accepted: Jul 28, 2014
Published online: Sep 8, 2014
Published in print: Dec 1, 2014
Discussion open until: Feb 8, 2015
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.