Distorted Physical Model to Study Sudden Partial Dam Break Flows in an Urban Area
Publication: Journal of Hydraulic Engineering
Volume 140, Issue 11
Abstract
A distorted physical model, based on Ürkmez Dam in Izmir, Turkey, was built to study sudden partial dam break flows. The distorted model had a horizontal scale of and a vertical scale of , containing dam reservoir, dam body, and downstream area—from dam body to Ürkmez urban area until the sea coast. In the model, the reservoir is approximately , the dam body has a width of 2.84 m and a height of 1.07 m, and the downstream area is nearly . The Ürkmez Dam was chosen because Ürkmez Town is located right at its downstream area, allowing the study of dam break flows in an urban area. Furthermore, the dimensions were suitable such that it allowed the construction of a physical model (dam reservoir, dam body, and downstream area) having a horizontal scale of in the available space of . The features creating roughness such as buildings, bridge, and roads were also reflected in the physical model. The dam break flow was investigated for sudden partial collapse, which was simulated by a trapezoidal breach on the dam body. The water depths at downstream area were measured at eight different locations by using WATER L (level) sensors. The velocities were measured at four different locations by ultrasonic velocity profiler (UVP) transducers. The propagation of the flood was recorded by a high-defnition camera. The experimental results show that the Ürkmez area can be flooded in a matter of minutes, at depths reaching up to 3 m in residential areas in 4 min. The flood wave front can reach the residential areas in 2 min and to the sea coast in 4 min. Flow velocities can reach in sparse residential areas, close to dam body. Away from the dam body in the sparse buildings part of the town, the velocities can reach . In dense residential areas of the town, the velocities are too low () but flow depths can reach 3 m. Velocity profiles show similar behavior like unsteady and nonuniform open channel flow in nonresidential areas close to the dam body. In residential areas away from the dam body, the velocity profiles are more uniform, having lower velocity values. Vertical variations of velocities show markedly different behavior during rising and recession stages. The profiles are smooth during the rising stage in sparse residential area, yet it shows fluctuating behavior during the recession stage.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This study is financially supported by Turkish Science and Technological Research Council (TÜBİTAK) through the 110M240 project. We deeply thank TUBITAK. Our gratitude goes to İzmir Municipality and İZSU Administration for their contributions on the acquisition of the required drawings and the relevant maps. The writers would also like to thank Professor Dr. Turhan Acatay for his valuable advice.
References
Alcrudo, F., and Mulet, J. (2007). “Description of the Tous Dam break case study.” J. Hydraul. Res., 45, 45–57.
Bozkus, Z. (2004). “Dam break analysis for disaster management.” IMO Teknik Dergi, 15(4), 3335–3350 (in Turkish).
Cagatay, H., and Kocaman, S. (2008). “Experimental study of tailwater level effects on dam break flood wave propagation.” Riverflow2008, Vol. 1, M. S. Altinakar, M. A. Kökpınar, I. Aydın, S. Çokgör, and S. Kırkgöz, eds., Kubaba, Ankara, Turkey, 635–644.
Eijelkamp Agrisearch Equipment. (2014). “e+ WATER L (Level) sensor.” 〈http://en.eijkelkamp.com/products/water/hydrological-research/water-level-measurements〉 (Jun. 4, 2014).
Frazao, S. S. (2007). “Experiments of dam break wave over a triangular bottom sill.” J. Hydraul. Res., 45, 19–26.
Frazao, S. S., and Zech, Y. (2007). “Experiments of dam break flow against an isolated obstacle.” J. Hydraul. Res., 45, 27–36.
Greco, M., Pontillo, M., Iervolino, M., and Leopardi, A. (2008). “2DH numerical simulation of breach evolution in an earth dam.” Riverflow2008, Vol. 1, M. S. Altinakar, M. A. Kökpınar, I. Aydın, S. Çokgör, and S. Kırkgöz, eds., Kubaba, Ankara, Turkey, 661–667.
LaRocque, L. A., Elkholy, M., Chaudhry, M. H., and Imran, J. (2013b). “Experiments of urban flooding caused by a levee breach.” J. Hydraul. Eng., 960–973.
LaRocque, L. A., Imran, J., and Chaudhry, M. H. (2013a). “Experimental and numerical investigation of two-dimensional dam-break flows.” J. Hydraul. Eng., 569–579.
Lauber, G., and Hager, W. (1998). “Experiments to dam break wave: Horizontal channel.” J. Hydraul. Res., 36(3), 291–307.
Leal, J. G. A. B., Ferreira, R. M. L., Franco, A. B., and Cardoso, A. H. (2002). “Dam-break waves on movable beds.” Riverflow 2002, Vol. 2, D. Bousmar, and Y. Zech, eds., Swets & Zeitlinger, Lisse, Netherlands, 981–990.
Map Data: Google, DigitalGlobe. (2013). 〈http://maps.google.com〉 (Oct. 14, 2012).
Met-Flow. (2002). UVP monitor model UVP-duo with software version 3, user guide, Met-Flow, S.A. Lausanne, Switzerland.
Met-Flow. (2014). “Transducers.” 〈http://www.met-flow.com/index.php?id=24〉 (Jun. 4, 2014).
Minussi, R. B., and Maciel, G. F. (2008). “Dam break problem-complete solution and shallow water approximation comparison.” Riverflow2008, Vol. 1, M. S. Altinakar, M. A. Kökpınar, I. Aydın, S. Çokgör, and S. Kırkgöz, eds., Kubaba, Ankara, Turkey, 619–626.
Molu, M. (1995). “Dam-break flood in a natural channel: A case study.” M.Sc. thesis, Civil Engineering Dept., Middle East Technical Univ., Ankara, Turkey.
Morris, M. W., Hassan, M. A. A. M., and Samuels, P. G. (2008). “Development of the HR BREACH model for predicting breach growth through flood embankments and embankment dams.” Riverflow2008, Vol. 1, M. S. Altinakar, M. A. Kökpınar, I. Aydın, S. Çokgör, and S. Kırkgöz, eds., Kubaba, Ankara, Turkey, 679–687.
Palumbo, A., Soares-Frazao, S., Goutiere, L., Pianese, D., and Zech, Y. (2008). “Dam-break flow on mobile bed in a channel with a sudden enlargement.” Riverflow2008, Vol. 1, M. S. Altinakar, M. A. Kökpınar, I. Aydın, S. Çokgör, and S. Kırkgöz, eds., Kubaba, Ankara, Turkey, 645–654.
Testa, G., Zuccala, D., Alcrudo, F., Mulet, J., and Frazao, S. S. (2007). “Flash flow experiment in a simplified urban district.” J. Hydraul. Res., 45, 37–44.
Vasquez, J. A., and Leal, J. G. B. (2006). “Two-dimensional dam-break simulation over movable beds with an unstructured mesh.” Riverflow 2006, Vol. I, R. M. L. Ferreira, E. C. T. L. Alves, J. G. A. B. Leal, and A. H. Cardoso, eds., Taylor & Francis, London, U.K., 1483–1491.
Vischer, V. L., and Hager, W. H. (1997). Dam hydraulics, Wiley, New York.
Yalın, M. S. (1971). Theory of hydraulic models, Macmillan Press, London.
Yanmaz, A. M., and Beşer, M. R. (2005). “On the reliability-based safety analysis of the Porsuk Dam.” Turk. J. Eng. Environ. Sci., 29(5), 309–320.
Yochum, S. E., Goertz, L. A., and Jones, P. H. (2008). “The Big Bay Dam failure: Accuracy and comparison of breach predictions.” J. Hydraul. Eng., 1285–1293.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Nov 5, 2013
Accepted: Jun 9, 2014
Published online: Jul 22, 2014
Published in print: Nov 1, 2014
Discussion open until: Dec 22, 2014
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.