Morphological Evolution of Dune-Like Bed Forms Generated by Bridge Scour
This article has a reply.
VIEW THE REPLYPublication: Journal of Hydraulic Engineering
Volume 140, Issue 5
Abstract
This research intends to provide new insights on sediment transport at bridges, exploring the features of migrating dune-like bed forms generated immediately behind piers or abutments by local scour processes. An extended VAW (Laboratory of Hydraulics, Hydrology, and Glaciology, Swiss Federal Institute of Technology Zurich) data set collected from 1999 to 2002 was analyzed. In total, 63 temporal runs involving 480 observations for cylindrical piers, and 54 runs with 384 observations for rectangular-shaped abutments were considered. It was found that the main dimensionless parameters governing the dune processes are the relative pier diameter (or abutment width), densimetric Froude number, wash-out parameter, and relative time. The dune height is mainly controlled by the relative width of the scour element, and its relative length depends on the wash-out parameter. The morphologic dune evolution and its downstream propagation are described using straightforward equations as a function of the key parameters. The results apply to practice and are suitable to assess the performance of computational modeling.
Get full access to this article
View all available purchase options and get full access to this article.
References
Ettema, R., Constantinescu, G., and Melville, B. (2011). “Evaluation of bridge scour research: Pier scour processes and predictions.” NCHRP Web-Only Document 175, Transportation Research Board of the National Academies, Washington, DC.
Euler, T., and Herget, J. (2012). “Controls on local scour and deposition induced by obstacles in fluvial environments.” Catena, 91(1), 35–46.
Hager, W. H., and Oliveto, G. (2002). “Shields’ entrainment criterion in bridge hydraulics.” J. Hydraul. Eng., 538–542.
Julien, P. Y. (2010). Erosion and sedimentation, 2nd Ed., Cambridge University Press, New York.
Kondap, D. M., and Garde, R. J. (1973). “Velocity of bed forms in alluvial channels.” Proc. 15th IAHR Congress, IAHR, Delft NL, 101–104.
Oliveto, G., and Hager, W. H. (2002). “Temporal evolution of clear-water pier and abutment scour.” J. Hydraul. Eng., 811–820.
Oliveto, G., and Hager, W. H. (2005). “Further results to time-dependent local scour at bridge elements.” J. Hydraul. Eng., 97–105.
Pagliara, S., and Carnacina, I. (2010). “Scour and dune morphology in presence of large wood debris accumulation at bridge pier.” River Flow 2010, A. Dittrich, Ka. Koll, J. Aberle and P. Geisenhainer, eds., Vol. 2, Bundesanstalt für Wasserbau, Karlsruhe, Germany, 1223–1230.
USACE (1982). “Laboratory investigation of scour around bridge piers.” MRD Hydraulic Laboratory Series, Rep. No. 14, Mead Hydraulic Laboratory, Mead, NE.
van Rijn, L. C. (1984). “Sediment transport, Part III: Bed forms and alluvial roughness.” J. Hydraul. Eng., 1733–1754.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Jul 25, 2013
Accepted: Dec 6, 2013
Published online: Feb 12, 2014
Published in print: May 1, 2014
Discussion open until: Jul 12, 2014
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.