New Method for the Offline Solution of Pressurized and Supercritical Flows
Publication: Journal of Hydraulic Engineering
Volume 139, Issue 9
Abstract
An offline approximation of the Saint Venant equations is proposed for combined sewer overflow (CSO) prediction. Precalculated tabulations of the mass and momentum equations allow online interpolation, accelerating run-time hydraulic computations above those yielded by standard industry software, while preserving accuracy. Previous methods of backwater profile compilation account only for subcritical, open-channel flows. This work further extends the backwater profiles to include pressurized flows, which are key for CSO conditions. Incorporation of the Darcy-Weisbach equation eliminates potential lookup table discontinuities between open-channel and pressurized conditions. Graphical depiction of supercritical flows causes iteration errors as nonunique flow rates appear for equivalent water surface elevations. Iteration errors can be eliminated by allowing the solution to proceed separately upstream and downstream from the governing critical water surface. This precalculated curve approach addresses discrepancies in supercritical flow and submerged weir calculations in the EPA SWMM model. The implicit computational approach surpasses SWMM run times by as much as 57% and proves an accurate tool for evaluation of sewer water levels for real-time optimization model incorporation.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors would like to recognize Dr. Chris Martin for first introducing the Newton-Raphson iteration for mass and momentum balance and Chuan Li for helping to determine the interceptor layout and geometry. An IBM Ph.D. Fellowship provided funding for the first author. The Metropolitan Water Reclamation District of Greater Chicago (MWRDGC) provided partial funding and the CSO data from which the case study is derived.
References
Bakhmeteff, B. (1932). Hydraulics of open channels, McGraw Hill, New York.
Braca, G. (2008). “Stage-discharge relationships in open channels: Practices and problems.”. Universita degli Studi di Trento, Trento, Italy.
Brater, E. F., King, H. W., Lindell, J. E., and Wei, C. Y. (1996). Handbook of hydraulics, 7th Ed., McGraw-Hill, New York.
Butler, D., and Schutze, M. (2005). “Integrating simulation models with a view to optimal control of urban wastewater systems.” Environ. Modell. Software, 20(4), 415–426.
Cardle, J. (1991). “Evaluation of stormsewer control algorithms using a transient mixed flow model.” Water Resour. Bull., 27(5), 819–830.
Cembrano, G., Quevedo, J., Salamero, M., Puig, V., Figueras, J., and Marti, I. (2004). “Optimal control of urban drainage systems. A case study.” Control Eng. Pract., 12(1), 1–9.
Chow, V. T. (1959). Open channel hydraulics, McGraw-Hill, New York.
Chow, V. T., Maidment, D. R., and Mays, L. W. (1988). Applied hydrology, McGraw-Hill, New York.
Cunge, J., Holly, F. M., and Verwey, A. (1980). Practical aspects of computational river hydraulics, Pitman Publishing, London.
Darsono, S., and Labadie, J. (2007). “Neural-optimal control algorithm for real-time regulation of in-line storage in combined sewer systems.” Environ. Modell. Software, 22(9), 1349–1361.
Dickinson, R. (2006). Supercritical Flow. Online SWMM Knowledge Base correspondence, 〈http://www.chiwater.com/BBS/forums/thread-view.asp?tid=3049&posts=6〉 (Feb. 10, 2012).
Dickinson, R. (2010). Orifice and Weir flow calculations. Online SWMM 5 or 5.0 Blog, 〈http://swmm5.blogspot.com/2010/10/orifice-and-weir-flow-calculations.html〉 (Feb. 10, 2012).
Diskin, M. H., Wyseure, G., and Feyen, J. (1984). “Application of a Cell Model to the Bellebeek Watershed.” Nordic Hydrol., 15(1), 25–38.
Dooge, J. C. I. (1973). “Linear theory of hydrologic systems.”, Washington, DC.
Duchesne, S., Mailhot, A., Dequidt, E., and Villeneuve, J. (2001). “Mathematical modeling of sewers under surcharge for real time control of combined sewer overflows.” Urban Water, 3(4), 241–252.
Franz, D., and Melching, C. (1997). “Full equations (FEQ) model for the solution of the full, dynamic equations of motion for 1-D unsteady flow in open channels and through control structures.”, USGS, Washington, DC.
Glovick, S., Sherill, J., Fujita, G., Rabbaig, M., Song, C., and Lautenbach, D. (2003). “The formation and control of surges and geysers in tunnel systems.” Proc., Water Environment Federation, Water Environment Federation Technical Exhibition and Conf., Alexandria, VA, 643–660.
Gonzalez-Castro, J., and Ansar, M. (2003). “Applicability of hydraulic performance graph for flow estimation in open channels.” Proc. ASCE-EWRI, American Society of Civil Engineers, Reston, VA.
Gonzalez-Castro, J. A., and Yen, B. C. (2000). “Applicability of Hydraulic Performance Graph for Unsteady Flow Routing.”, Dept. Civil Engineering, Univ. of Illinois Urbana-Champaign, Urbana, IL.
Herschy, R. (1995). Streamflow measurement, 2nd Ed., Chapman and Hall, London.
Hoy, M. (2005). “Unsteady flow routing using predetermined solutions to the equations for conservation of mass and momentum.” M.S. Thesis, Univ. of Illinois at Urbana-Champaign, Urbana, IL.
Hoy, M., and Schmidt, A. (2006). “Unsteady flow routing in sewers using hydraulic and volumetric performance graphs.” Proc. ASCE-EWRI Congress, American Society of Civil Engineers, Reston, VA.
Jin, M., and Fread, D. L. (1997). “Dynamic flood routing with explicit and implicit numerical solution schemes.” J. Hydraul. Eng., 123(3), 166–173.
Kennedy, E. J. (1984). Discharge ratings at gaging stations. Book 3, applications of hydraulics, USGS, Dept. of the Interior, Washington, DC.
Leon, A., Choi, N., Schmidt, A., and Garcia, M. (2009). The Illinois transient model, V.Y. Chow Hydrosystems Lab, Dept. of Civil and Environmental Engineering, Univ. of Illinois at Urbana-Champaign, Urbana, IL.
Mailhot, A., Bilodeau, A., Blanchette, C., Lavallee, P., and Villenueve, J.-P. (1998). “Real-time control of combined sewer overflow: the SWIFT model.” Chapter 15, New appliations in modelling urban water systems (monograph 7), W. James, ed.,CHI Publications, Toronto.
Oberg, N., Leon, A. S., Schmidt, A. R., and Garcia, M. H. (2008). “Illinois hydraulic conveyance analysis program (ICAP): Version 1.” Univ. of Illinois, Urbana, IL.
Pleau, M., Colas, H., Lavallee, P., Pelletier, G., and Bonin, R. (2005). “Global optimal real-time control of the Quebec urban drainage system.” Environ. Modell. Software, 20(4), 401–413.
Rantz, S. E., et al. (1982). “Measurement and computation of streamflow., Vol. 2: Computation of discharge.”, Washington, DC.
Rauch, W., et al. (2002). “Mathematical Modelling of Integrated Urban Drainage Systems.” Water Sci. Technol., 45(3), 81–94.
Rossman, L. A. (2010). “Storm water management model user’s manual version 5.0.”, Washington, DC.
Schmidt, A. (2002). “Analysis of stage-discharge relations for open-channel flows and their associated uncertainties.” Ph.D. thesis, Dept. of Civil Engineering, Univ. of Illinois at Urbana-Champaign, Urbana, IL.
Schmidt, A., and Yen, B. (2001). “Stage-discharge relationship in open channels.” Proc., 3rd Intl. Symp. On Environmental Hydraulics, ISEH and IAHR, Madrid, Spain.
Schutze, M., Campisano, A., Colas, H., Schilling, W., and Vanrolleghem, P. (2004). “Real time control of urban wastewater systems – Where do we stand today?” J. Hydrol., 299(3–4), 335–348.
Sempere-Torres, D., Corral, C., Raso, J., and Malgrat, P. (1999). “Use of weather radar for combined sewer overflows monitoring and control.” J. Environ. Eng., 125(4), 372–380.
Sturm, T. W. (2001). Open channel hydraulics, McGraw-Hill, New York.
Vanrolleghem, P., Benedetti, L., and Meirlaen, J. (2005). “Modelling and real-time control of the integrated urban wastewater system.” Environ. Modell. Software, 20(4), 427–442.
Yan, S., and Minsker, B. (2006). “Optimal groundwater remediation design using an Adaptive Neural Network Genetic Algorithm.” Water Resour. Res., 42(5), 1–14.
Yen, B. C. (1973). “Methodologies for flow prediction in urban storm drainage systems.”, Univ. of Illinois Urbana-Champaign, Urbana, IL.
Yen, B. C. (1986). “Hydraulics of sewers.” Advances in Hydroscience, Vol. 14, B. C. Yen, ed., Academic Press, Orlando, FL.
Yen, B. C., and Gonzalez-Castro, J. A. (1994). “Determination of Boneyard Creek flow capacity by hydraulic performance graph.”, Univ. of Illinois, Urbana, IL.
Yen, B. C., and Gonzalez-Castro, J. A. (2000). “Open-channel capacity determination using hydraulic performance graph.” J. Hydraul. Eng., 126(2), 112–122.
Young, D., Munson, B., and Okiishi, T. (2001). A brief introduction to fluid mechanics, 2nd Ed., Wiley, New York.
Information & Authors
Information
Published In
Copyright
© 2013 American Society of Civil Engineers.
History
Received: Jul 4, 2012
Accepted: Feb 11, 2013
Published online: May 2, 2013
Published in print: Sep 1, 2013
Discussion open until: Oct 2, 2013
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.