New General Analytical Solution for Infiltration Structures Design
Publication: Journal of Hydraulic Engineering
Volume 139, Issue 6
Abstract
This paper develops an analytical solution to assist in designing and sizing stormwater infiltration structures. As original elements, our solution allows to estimate the hydraulic head in the infiltration structure as a function of (1) storm temporal dynamics, making use of an appropriate intensity duration frequency (IDF) curve, (2) the model adopted to describe the response of the catchment to a given input rainfall, and (3) the evolution of the wetted front advancing in a homogeneous soil where the infiltration device is located. Our solution allows highlighting the effects of the various simplifications associated with existing formulations employed in the common engineering practice. Our results indicate that typically adopted methodologies based on the assumptions of a uniform infiltration rate and/or negligible flow rate along the lateral surface of the structure may lead to overestimating the key design parameters.
Get full access to this article
View all available purchase options and get full access to this article.
References
Abbott, C. L., and Comino-Mateos, L. (2001). “In situ performance monitoring of an infiltration drainage system and field testing of current design procedures.” Water Environ. J., 15(3), 198–202.
Akan, A. O. (2002a). “Sizing stormwater infiltration structures.” J. Hydrol. Eng., 128(5): 534–537.
Akan, A. O. (2002b). “Modified rational method for sizing infiltration structures.” Can. J. Civ. Eng., 29(4), 539–542.
ATV-DVWK-Arbeitsgruppe. (2002). Planning, Bau und Betrieb von Anlagen zur Versickerrung von Neiderschlagswasser (Design, construction and operation of rainwater drainage systems), Gesellschaft zur Förderung der Abwassertechnik e.V., (German Association for Water, Wastewater and Waste), Hennef, Germany.
Becciu, G., Mambretti, S., and Paoletti, A. (1997). “Risk design of urban drainage networks on the basis of experimental data, Excerpta of the Italian contributions to the field of hydraulic engineering.” 11, 7–57.
Belfort, B., Ramasomanana, F., Younes, A., and Lehmann, F. (2009). “An efficient lumped mixed hybrid finite element formula on for variably saturated groundwater flow.” Vadose Zone J., 8(2), 352–362.
Bennerstedt, K. (1999). “Strategy for handling stormwater in Stockholm.” Proc., 8th Int. Conf. on Urban Storm Drainage, Institution of Engineers Australia, Barton, Australia, 578.
Bettess, R. (1996). “Infiltration drainage-manual of good practice.”, Construction Industry Research and Information Association (CIRIA), London, UK.
Bouwer, H. (1969). “Infiltration of water into nonuniform soil.” J. Irrig. Drain. Eng., 95, 451–462.
Building Research Establishment (BRE). (1991). “Soakaway design.” BRE Digest 365, BRE Bookshop, Watford, UK.
Crobeddu, E., Bennis, S., and Rhouzlane, S. (2007). “Improved rational hydrograph method.” J. Hydrol., 338(1–2), 63–72.
Emerson, C. H., Wadzuk, B. M., and Traver, R. G. (2010). “Hydraulic evolution and total suspended solids capture of an infiltration trench.” Hydrol. Proc., 24(8), 1008–1014.
Fok, Y., Chung, S., and Clark, C. K. (1982). “Two-dimensional exponential infiltration equations.” J. Irrig. Drain. Eng., 108(4), 231–241.
Green, W. H., and Ampt, G. A. (1911). “Studies on soil physics. I. The flow of air and water through soil.” J. Agric. Sci., 4(1), 1–24.
Ground Water Daughter Directive (GWDD). (2006). “Directive of the European Parliament and of the council of 12 December 2006 on the protection of groundwater against pollution and deterioration.”, Environment Directorate-General of the European Commission, Brussels.
Haf, M., Götting, S., Scholz, M., and Heal, K. (2004). “Case study: design and operation of sustainable urban stormwater ponds treating road runoff during the system set-up phase.” Proc., Int. Conf. Hydrology: Science & Practice for the 21st Century, Vol. 2, British Hydrological Society, London.
Hall, M. J. (1986). Urban hydrology, Elsevier, London, 299.
Hong, Y. M. (2010). “Experimental evaluation of design methods for in-site detention ponds.” Int. J. Sediment Res., 25(1), 52–63.
Huang, K., Mohanty, B. P., and van Genuchten, M. T. (1996). “A new convergence criterion for the modified Picard iteration method to solve the variably saturated flow equation.” J. Hydrol., 178(1–4), 69–91.
Keifer, C. J., and Chu, H. H. (1957). “Synthetic storm pattern for drainage design.” J. Hyd. Div. Proc. ASCE, 83(4), 1332-1–1332-25.
Kuichling, E. (1889). “The relation between the rainfall and the discharge of sewer in populous districts.” Trans. ASCE, 20(1), 1–56.
Martin, P., et al. (2000). “Sustainable urban drainage systems-design manual for England and Wales.”, Construction Industry Research and Information Association (CIRIA), London.
Nozi, T., Mase, T., and Murata, K. (1999). “Maintenance and management aspects of stormwater infiltration system.” Proc., 8th Int. Conf. on Urban Storm Drainage, Institution of Engineers Australia, Barton, Australia, 1497–1503.
Philip, J. R. (1969). “Theory of infiltration.” Adv. Hydrosci., 5, 215–296.
Radcliffe, D. E., and West, L. T. (2009). “Design hydraulic loading rates for onsite wastewater systems.” Vadose Zone J., 8(1), 64–74.
Scholz, M. (2004). “Case study: Design, operation, maintenance and water quality management of sustainable storm water ponds for roof runoff.” Bioresour. Technol., 95(3), 269–279.
Sieker, F. (1984). “Stormwater infiltration in urban areas.” Proc., 3rd Int. Conf. on Urban Storm Drainage, IAHR/IAWQ, Chalmers Univ. of Technology, Goteborg, Sweden, 1083–1091.
van Genuchten, M. Th. (1980). “A closed-form equation for predicting the hydraulic conductivity of unsaturated soils.” Soil Sci. Soc. Am. J., 44(5), 892–898.
Water Framework Directive (WFD). (2000). “Directive of the European Parliament and of the council of 23 October 2000 establishing a framework for community action in the field of water policy.”.
Woods-Ballard, B., Kellagher, R., Martin, P., Jefferies, C., Bray, R., and Shaffer, P. (2007). The SUDS manual, CIRIA C697, CIRIA, London, UK.
Zheng, J., Nanbakhsh, H., and Scholz, M. (2006). “Case study: Design and operation of sustainable urban infiltration ponds treating storm runoff.” J. Urban Plann. Dev., 132(1), 36–41.
Zimmer, U., Geiger, W. F., and Caesperlein, G. (1999). “Safety factors for the design of infiltration facilities.” Proc., 8th Int. Conf. on Urban Storm Drainage, Institution of Engineers Australia, Barton, Australia, 256–264.
Information & Authors
Information
Published In
Copyright
© 2013 American Society of Civil Engineers.
History
Received: Jan 5, 2012
Accepted: Dec 14, 2012
Published online: Dec 17, 2012
Published in print: Jun 1, 2013
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.