Converging Stepped Spillways: Simplified Momentum Analysis Approach
Publication: Journal of Hydraulic Engineering
Volume 138, Issue 9
Abstract
Roller compacted concrete (RCC) stepped spillways are growing in popularity for providing overtopping protection for aging watershed dams with inadequate auxiliary spillway capacity and for the construction of new dams. Site conditions, such as limited right-of-way, topography, and geological formations, often dictate that these spillways converge. Convergence increases the flow depth near the training walls and alters the stilling basin design requirements as compared with traditional straight spillways. A simplified control volume momentum analysis is presented for predicting the minimum vertical training wall height necessary to prevent wall overtopping in converging stepped spillways. An expression is developed to predict vertical training wall height as a function of centerline flow depth, centerline velocity, chute slope, and convergence angle. A three-dimensional sloping stepped spillway model with an ogee crest and convergence ranging from 0–70° was constructed to verify this relationship. The evaluation showed approximately 2% error for all combined convergences. Because the relationship is based on momentum principles, it provides design engineers with a method for determining minimum training wall height requirements under nonair entrained flow conditions for a range of design conditions (e.g., chute slopes, convergences, and step heights).
Get full access to this article
View all available purchase options and get full access to this article.
References
Boes, R. M. (2000). “Scale effects in modeling two-phase stepped spillway flow.” Int. Workshop on Hydraulics of Stepped Spillways, Minor, H. E., and Hager, W. H., eds., Balkema, Zürich, Switzerland, 53–60.
Boes, R. M., and Hager, W. H. (2003a). “Hydraulic design of stepped spillways.” J. of Hydraul Eng., 129(9), 671–679.
Boes, R. M., and Hager, W. H. (2003b). “Two-phase flow characteristics of stepped spillways.” J. of Hydraul Eng., 129(9), 661–670.
Chanson, H. (1994). “Hydraulics of skimming flows over stepped channels and spillways.” J. of Hydraul Eng. Res., 32(3), 445–460.
Chanson, H. (2002). The hydraulics of stepped chutes and spillways, A. A. Balkema, Steenwijk, Netherlands.
Chanson, H., and Toombes, L. (2002). “Experimental investigations of air entrainment in transition and skimming flows down a step chute.” Can. J. Civ. Eng., 29(1), 145–156.
Chow, V. T. (1959). Open-channel hydraulics, McGraw-Hill, Boston, MA.
Golder Associations, Inc. (2003). “Final hydrology and hydraulics study Big Haynes Creek Watershed Dam No. 3 Gwinnet County, Georgia.” Atlanta, GA.
Gonzalez, C. A., and Chanson, H. (2007). “Hydraulic design of stepped spillways and downstream energy dissipators for embankment dams.” Dam Eng., 17(4), 223–244.
Hager, W. H. (1992). “Spillways—Shockwaves and air entrainment.” ICOLD Bulletin 81, Int. Commission for Large Dams, Paris.
Hager, W. H. (2010). Wastewater hydraulics—Theory and practice, Springer, Heidelberg, Germany.
Hanna, L. J., and Pugh, C. A. (1997). “Hydraulic model study of Pilar Dam.” U.S. Dept. of Interior, Bureau of Reclamation, U. S. Government Printing Office, Denver, CO.
Hunt, S. L. (2008). “Design of converging stepped spillways.” Ph.D. dissertation, Colorado State Univ., Ft. Collins, CO.
Hunt, S. L., and Kadavy, K. C. (2006). “Physical model study of a proposed converging RCC stepped spillway.” Proc., ASABE Annual Int. Meeting, ASABE, St. Joseph, MI.
Hunt, S. L., and Kadavy, K. C. (2009). “The effect of step height on energy dissipation in stepped spillways.” Proc., ASCE EWRI World Water and Environmental Resources Congress, ASCE, Reston, VA.
Hunt, S. L., and Kadavy, K. C. (2010a). “Energy dissipation on flat-sloped stepped spillways: Part 1. Upstream of the inception point.” Trans. ASABE, 53(1), 103–109.
Hunt, S. L., and Kadavy, K. C. (2010b). “Energy dissipation on flat-sloped stepped spillways: Part 2. Downstream of the inception point.” Trans. ASABE, 53(1), 111–118.
Hunt, S. L., and Kadavy, K. C. (2011). “Inception point relationship for flat-sloped stepped spillways.” J. Hydraul. Eng., 137(2), 262–266.
Hunt, S. L., Kadavy, K. C., Abt, S. R., and Temple, D. M. (2008). “Impact of converging chute walls for roller compacted concrete stepped spillways.” J. Hydraul. Eng., 134(7), 1000–1003.
Ippen, A. T., and Dawson, J. H. (1951). “Design of channel contractions.” Proc. Am. Soc. Civ. Eng., 116, 326–346.
Ippen, A. T., and Harleman, D. R. F. (1956). “Verification of theory for oblique standing waves.” Proc. Am. Soc. Civ. Eng., 121, 678–694.
Meireles, I., and Matos, J. (2009). “Skimming flow in the nonaerated region of stepped spillways over embankment dams.” J. Hydraul. Eng., 135(8), 685–689.
Robinson, K. M., Rice, C. E., Kadavy, K. C., and Talbot, J. R. (1998). “Energy losses on roller compacted concrete stepped spillways.” Proc., 1998 Water Resources Engineering, Vol. 2, ASCE, Reston, VA, 1434–1439.
Takahashi, M., Yasuda, Y., and Ohtsu, I. (2005). “Effect of Reynolds number on characteristics of skimming flows in stepped channels.” Proc., 31st Biennial Int. Association for Hydro-Environment Engineering and Research (IAHR) Congress, Jun, B. H., Lee, S. I., Seo, I. W., and Choi, G. W., eds., Seoul, Korea, 2880–2889.
United States Bureau of Reclamation (USBR). (1980). Hydraulic Laboratory Techniques, U.S. Government Printing Office, Denver, CO.
Woolbright, R. W. (2008). “Hydraulic performance evaluation of RCC stepped spillways with sloped converging training walls.” M.S. thesis, Oklahoma State Univ., Stillwater, OK.
Information & Authors
Information
Published In
Journal of Hydraulic Engineering
Volume 138 • Issue 9 • September 2012
Pages: 796 - 802
Copyright
© 2012 American Society of Civil Engineers.
History
Received: Jul 25, 2011
Accepted: Feb 23, 2012
Published online: Feb 25, 2012
Published in print: Sep 1, 2012
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.