Momentum Balance Method and Estimation of Boundary Shear Stress Distribution
Publication: Journal of Hydraulic Engineering
Volume 138, Issue 7
Abstract
Determination of local boundary shear stress is an important topic in hydraulic engineering. When attempting to determine this from a very thin boundary region, it is a difficult one because it requires special skills and instruments to treat the measured data. With the advent of new equipment, like the acoustic Doppler velocity profilers (ADVP), all the velocity profiles in the primary flow region can be simultaneously measured, and it is necessary to develop a new method to estimate the boundary shear stress using the primary flow data. This paper presents such a method called the momentum balance method (MBM). A theoretical relationship between the boundary shear stress and parameters of the primary flow region has been established. The results obtained from MBM agree reasonably well with other methods, indicating that the new method is workable in closed duct flows, and possibly its applicability can be extended to a wide range of boundary conditions.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The works are supported, in part, by the open funds provided by Nanjing Institute of Geography and Limnology, China (2010SKL005) and the State Key Lab of Hydraulics and Mountain River Eng. at Sichuan Univ., China (SKLH-OF-1002).
References
Chien, N. N. and Wan, Z. (1999). Mechanics of sediment transport, ASCE, Reston, VA.
Dey, S., and Lambert, M. F. (2005). “Reynolds stress and bed shear in nonuniform unsteady open-channel flow.” J. Hydraul. Eng., 131(7), 610–614.JHEND8
Dey, S., and Raikar, R. V. (2007). “Characteristics of Loose Rough Boundary Streams at Near-Threshold.” J. Hydraul. Eng., 133(3), 288–304.JHEND8
Dwivedi, A., et al. (2010). “Hydrodynamic forces generated on a spherical sediment particle during entrainment.” J. Hydraul. Eng., 136(10), 756–769.JHEND8
Bagherimiyab, F., and Lemmin, U. (2011). “Turbulence and fine sediment suspension in accelerating and decelerating open-channel flow.” Proc., 34th IAHR World Congress, Brisbane, Australia, 3362–3369.
Bruun, H. H. (1996). Hot-wire anemometry: Principles and signal analysis, Oxford University Press, Oxford, 272–286.
Hoagland, L. C. (1960). “Fully developed turbulent flow in straight rectangular ducts- secondary flow, its cause and effect on the primary flow.” Ph.D. thesis, MIT, Dept. of Mechanical Engineering, Cambridge, MA.
Knight, D. W., and Patel, H. S. (1985). “Boundary shear in smooth rectangular ducts.” J. Hydraul. Eng., 111(1), 29–47.JHEND8
Leutheusser, H. J. (1963). “Turbulent flow in rectangular ducts.” J. Hydr. Div.JIDEDH, 89(3), 1–19.
Lim, S. Y., and Yang, S. Q. (2005). “Simplified model of tractive-force distribution in closed conduits.” J. Hydraul. Eng., 131(4), 322–329.JHEND8
Nezu, I., and Nakagawa, H. Ed. (1993). Turbulence in open-channel flows, Balkema Publishers, Rotterdam, The Netherlands.
Nezu, I., and Rodi, W. (1986). “Open channel flow measurements with a laser doppler anemometer.” J. Hydraul. Eng., 112(5), 335–355.JHEND8
Reda, D. C., et al. (1997). “New methodology for the measurement of surface shear stress vector distributions.” AIAA J., 35(4), 608–614.AIAJAH
Rhodes, D. G., and Knight, D. W. (1994). “Distribution of shear force on boundary of smooth rectangular duct.” J. Hydraul. Eng., 120(7), 787–807.JHEND8
Tracy, H. J. (1965). “Turbulent flow in a three-dimensional channel.” J. Hydr. Div.JIDEDH, 91(6), 9–35.
Wietrzak, A., and Lueptow, R. M. (1994). “Wall shear stress and velocity in a turbulent axisymmetrical boundary-layer.” J. Fluid Mech., 259, 191–218.JFLSA7
Wilcock, N. P. R. (1996). “Estimating local bed shear stress from velocity observations.” Water Resour. Res., 32(11), 3361–3366.WRERAQ
Yang, S.-Q., et al. (2005). “Investigation of near wall velocity in 3-D smooth channel flows.” J. Hydraul. Res., 43(2), 149–157.JHYRAF
Yang, S.-Q. (2009). “Mechanism for initiating secondary currents in channel flows.” Can. J. Civ. Eng., 36(9), 1506–1516.CJCEB8
Yang, S.-Q. (2010). “Depth-averaged shear stress and velocity in open-channel flows.” J. Hydraul. Eng., 136(11), 952–958.JHEND8
Yu, G., and Tan, S.-K. (2006). “Errors in the bed shear stress as estimated from vertical velocity profile.” J. Irrig. Drain. Eng., 132(5), 490–497.JIDEDH
Information & Authors
Information
Published In
Copyright
© 2012. American Society of Civil Engineers.
History
Received: Sep 27, 2011
Accepted: Jan 13, 2012
Published online: Jun 15, 2012
Published in print: Jul 1, 2012
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.