Stable Numerical Model for Transcritical Flow and Sediment Transport on Uneven Bathymetry
Publication: Journal of Hydraulic Engineering
Volume 138, Issue 1
Abstract
A stable and well-balanced finite volume method was proposed to solve the shallow water equations coupled with a sediment transport equation. An approximate Riemann solver with a monotone upstream-centered schemes for conservation laws (MUSCL) reconstruction was used for the computation of the flux terms. A special but relatively simple treatment of source terms made it possible to ensure numerically and physically balanced computational results on very steep sloped beds. Various numerical simulations conducted on rigid beds have demonstrated that the proposed numerical scheme could provide stable computational results in the cases of flat and nonflat bottoms. From the comparisons of experiments on erodible beds in one- and two-dimensional channels, good agreement was obtained when proper parameters for turbulent flow and sediment transport were provided. Lastly, the effects of the parameters in relation to hydraulic characteristics included in the flow and the sediment transport models were investigated and briefly discussed.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This research was supported by the Basic Science Research Program through the National Research Foundation of Korea (NRF) funded by the Ministry of Education, Science and Technology (Grant Nos. KMST2011-0013032 and KMST2011-0015080).
References
Abderrezzak, K. E. K., and Paquier, A. (2011). “Applicability of sediment transport capacity formulas to dam-break flows over movable beds.” J. Hydraul. Eng., 137(2), 367–371.
Bradford, S. F., and Sanders, B. F. (2002). “Finite-volume model for shallow-water flooding of arbitrary topography.” J. Hydraul. Eng., 128(3), 289–298.
Cao, Z., Day, R., and Egashira, S. (2002). “Coupled and decoupled numerical modelling of flow and morphological evolution in alluvial rivers.” J. Hydraul. Eng., 128(3), 306–321.
Cao, Z., Pender, G., and Carling, P. (2006). “Shallow water hydrodynamic models for hyperconcentrated sediment-laden floods over erodible bed.” Adv. Water Resour., 29(4), 546–557.
Cao, Z., Pender, G., Wallis, S., and Carling, P. (2004). “Computational dam-break hydraulics over mobile sediment bed.” J. Hydraul. Eng., 130(7), 689–703.
Capart, H., Young, D. L., and Zech, Y. (2001). “Dam-break induced debris flow and particulate gravity currents.” Particulate gravity currents: Special publication 31 of the International Association of Sedimentologists, Vol. 31, B. Kneller, B. McCaffrey, J. Peakall, and T. Druitt, eds., Wiley-Blackwell, Hoboken, NJ, 149–156.
Elder, J. W. (1959). “The dispersion of marked fluid in turbulent shear flow.” J. Fluid Mech., 5, 544–560.
Fraccarollo, L., and Capart, H. (2002). “Riemann wave description of erosional dam-break flows.” J. Fluid Mech., 461, 183–228.
Fraccarollo, L., and Toro, E. F. (1995). “Experimental and numerical assessment of the shallow water model for two-dimensional dam-break type problems.” J. Hydraul. Res., 33(6), 843–864.
Garcia-Navarro, P., and Vazquez, M. E. (2000). “On numerical treatment of the source terms in the shallow water equations.” Computer and Fluids, 29(8), 951–979.
Gomez, B., and Church, M. (1989). “An assessment of bed load sediment transport formulae for gravel bed rivers.” Water Resour. Res., 25(6), 1161–1186.
Goutiere, L., Soares-Frazao, S., and Zech, Y. (2012). “Dam-break flow on mobile bed in a channel with a sudden widening: experimental data.” J. Hydraul. Res., 49(3), 367–371.
Kim, D. H., Cho, Y. S., and Kim, H. J. (2008). “Well balanced scheme between flux and source terms for computation of shallow-water equations over irregular bathymetry.” J. Eng. Mech., 134(4), 277–290.
Leal, J. G., Ferreira, R. M. L., and Cardoso, A. H. (2006). “Dam-break wave-front celerity.” J. Hydraul. Eng., 132(1), 69–76.
Leal, J. G., Ferreira, R. M. L., and Cardoso, A. H. (2009). “Maximum level and time to peak of dam-break waves on mobile horizontal bed.” J. Hydraul. Eng., 135(11), 995–999.
Leighton, F. Z., Borthwick, A. G. L., and Taylor, P. H. (2010). “1-D numerical modelling of shallow flows with variable, horizontal density.” Int. J. Numer. Methods Fluids, 62(11), 1209–1231.
Lynett, P., Melby, J. A., and Kim, D. H. (2010). “An application of Boussinesq modeling to hurricane wave overtopping and inundation.” Ocean Eng., 37(1), 135–153.
Mingham, C. G., and Causon, D. M. (1998). “High-resolution finite-volume method for shallow water flows.” J. Hydraul. Eng., 124(6), 605–614.
Murillo, J., and Garcia-Navarro, P. (2010). “An Exner-based coupled model for two-dimensional transient flow over erodible bed.” J. Comput. Phys., 229(23), 8704–8732.
Palumbo, A., Soares-Frazao, S., Goutiere, L., Pianese, D., and Zech, Y. (2008). “Dam-break flow on mobile bed in a channel with a sudden enlargement.” Proc., River Flow 2008 Int. Conf. on Fluvial Hydraulics, Vol. 1, M. Altinakar et al., eds., International Association for Hydro-Environment Engineering and Research, Madrid, Spain, 645–654.
Roe, P. L. (1981). “Approximate Riemann solvers, parameter vectors, and difference schemes.” J. Comput. Phys., 43(2), 357–372.
Rogers, B. D., Borthwick, A. G. L., and Taylor, P. H. (2003). “Mathematical balancing of flux gradient and source terms prior to using Roe’s approximate Riemann solver.” J. Comput. Phys., 192(2), 422–451.
Soares-Frazao, S., and Zech, Y. (2002). “Dam break in channels with 90° bend.” J. Hydraul. Eng., 128(11), 956–968.
Soares-Frazao, S., and Zech, Y. (2010). “HLLC scheme with novel wave-speed estimators appropriate for two-dimensional shallow-water flow on erodible bed.” Int. J. Numer. Methods Fluids, 66(8), 1019–1036.
Toro, E. F. (2002). Shock-capturing methods for free-surface shallow flows, Wiley, Hoboken, NJ.
Van Leer, B. (1979). “Towards the ultimate conservative difference scheme. V. A second-order sequel to Godunov’s method.” J. Comput. Phys., 32(1), 101–136.
Wei, G., and Kirby, J. T. (1995). “Time-dependent numerical code for extended Boussinesq equations.” J. Waterway, Port, Coastal, Ocean Eng., 121(5), 251–261.
Wu, W., and Wang, S. Y. (2007). “One-dimensional modeling of dam-break flow over movable beds.” J. Hydraul. Eng., 133(1), 48–58.
Xia, J., Lin, B., Falconer, R. A., and Wang, G. (2010). “Modelling dam-break flows over mobile beds using a 2D coupled approach.” Adv. Water Resour., 33(2), 171–183.
Yamamoto, S., and Daiguji, H. (1993). “Higher-order-accurate upwind schemes for solving the compressible Euler and Navier-Stokes equations.” Comput. Fluids, 22(2/3), 259–270.
Zhou, J. G., Causon, D. M., Mingham, C. G., and Ingram, D. M. (2001). “The surface gradient method for the treatment of source terms in the shallow-water equations.” J. Comput. Phys., 168(1), 1–25.
Information & Authors
Information
Published In
Copyright
© 2012 American Society of Civil Engineers.
History
Received: Sep 16, 2010
Accepted: Jun 10, 2011
Published online: Jun 14, 2011
Published in print: Jan 1, 2012
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.