Influence of Wood Debris Accumulation on Bridge Pier Scour
Publication: Journal of Hydraulic Engineering
Volume 137, Issue 2
Abstract
This note deals with the influence of debris accumulation on scour around bridge piers. Clear-water experiments in different hydraulic conditions have been carried out with three wood debris shapes: rectangular, triangular, and cylindrical. A wide range of debris thickness and width were studied in order to determine their influence on the maximum scour hole depth temporal evolution. The ratio of the pier diameter to the channel width was varied between 0.05 and 0.12 with total bridge contractions up to 20%. A proposed relation presents a simple design procedure to predict the increase in scour depth, which mainly depends on the flow contraction due to the debris accumulation.
Get full access to this article
View all available purchase options and get full access to this article.
References
Bradley, J. B., Richards, D. L., and Bahner, C. D. (2005). “Debris control structures— Evaluation and countermeasures.” Rep. No. FHWA-IF-04-016, Hydraulic Engineering Circular No. 9, 3rd Ed., Federal Highway Administration, Washington, D.C.
Braudrick, C. A., Grant, G. E., Ishikawa, Y., and Ikeda, H. (1997). “Dynamics of wood transport in streams: A flume experiment.” Earth Surf. Processes Landforms, 22(7), 669–683.
Briaud, J. L., Chen, H. C., Chang, K. A. Chen, X., and Oh, S. J. (2006). “Scour at bridges due to debris accumulation: A review.” Proc., 3rd Int. Conf. on Scour and Erosion (CD-ROM), CURNET Gouda Publisher, The Netherlands.
Dey, S., and Debnath, K. (2001). “Sediment pickup on streamwise sloping beds.” J. Irrig. Drain. Eng., 127(1), 39–43.
Dey, S., and Raikar, R. V. (2005). “Scour in long contraction.” J. Hydraul. Eng., 131(12), 1036–1049.
Diehl, T. H. (1997). “Potential drift accumulation at bridges.” Publication No. FHWA-RD-97-028, Federal Highway Administration, Washington, D.C.
Hager, W. H., and Oliveto, G. (2002). “Shields’ entrainment criterion in bridge hydraulics.” J. Hydraul. Eng., 128(5), 538–542.
Lagasse, P. F., Clopper, P. E., and Zevenbergen, L. W. (2009). “Impacts of debris on bridge pier scour.” Proc., of 33rd IAHR Congress, IAHR, Madrid, 3967–3974.
Lyn, D. A. (2008). “Pressure-flow scour: A reexamination of the HEC-18 equation.” J. Hydraul. Eng., 134(7), 1015–1020.
Lyn, D. A., Cooper, T., Yi, Y. K., Sinha, R., and Rao, A. R. (2003). “Debris accumulation at bridge crossings: Laboratory and field studies.” Rep. No. FHWA/IN/JTRP-2003/10, Purdue e-Pubs, Purdue Univ., West Lafayette, Ind., ⟨http://docs.lib.purdue.edu/jtrp/48⟩ ( June 2008).
Melville, B. W., and Chiew, Y. M. (1999). “Time scale for local scour at bridge piers.” J. Hydraul. Eng., 125(1), 59–65.
Melville, B. W., and Dongol, D. M. (1992). “Bridge pier scour with debris accumulation.” J. Hydraul. Eng., 118(9), 1306–1310.
Melville, B. W., and Dongol, D. M. (1994). “Closure of ‘Bridge pier scour with debris accumulation’ by Bruce W. Melville and D. M. Dongol (September, 1992, Vol. 118, No. 9).” J. Hydraul. Eng., 120(4), 523–524.
Melville, B. W., and Sutherland, A. J. (1988). “Design method for local scour at bridge piers.” J. Hydraul. Eng., 114(10), 1210–1226.
Oliveto, G., and Hager, W. H. (2002). “Temporal evolution of clear-water pier and abutment scour.” J. Hydraul. Eng., 128(9), 811–820.
Oliveto, G., and Hager, W. H. (2005). “Further results to time-dependent local scour at bridge elements.” J. Hydraul. Eng., 131(2), 97–105.
Raudkivi, A. J., and Ettema, R. (1983). “Clear-water scour at cylindrical piers.” J. Hydraul. Eng., 109(3), 338–350.
Raudkivi, A. J., and Ettema, R. (1985). “Scour at cylindrical bridge piers in armoured beds.” J. Hydraul. Eng., 111(4), 713–731.
Richardson, E. V., and Davis, S. R. (2001). “Evaluating scour at bridges.” Rep. No. FHWA-NHI-01-001, Hydraulic Engineering Circular No. 18, 4th Ed., Federal Highway Administration, Washington, D.C.
Wallerstein, N., and Thorne, C. R. (1996). Impacts of woody debris on fluvial processes and channel morphology in stable and unstable streams, U.S. Army Research Development and Standardization Group, London.
Wallerstein, N. P. (2003). “Dynamic models for constriction scour caused by large woody debris.” Earth Surf. Processes Landforms, 28(1), 49–68.
Wellwood, N., and Fenwick, J. (1990). “A flood loading methodology for bridges.” Proc., 15th Australian Road Research Board Conf., Australian Road Research Board, Melbourne, Australia, 315–341.
Wu, W., and Wang, S. S. Y. (1999). “Movable bed roughness in alluvial rivers.” J. Hydraul. Eng., 125(12), 1309–1312.
Zevenbergen, L. W., Lagasse, P. F., Clopper, P. E., and Spitz, W. J. (2006). “Effects of debris on bridge pier scour.” Proc., 3rd Int. Conf. on Scour and Erosion (CD-ROM), CURNET Gouda Publishers, The Netherlands.
Information & Authors
Information
Published In
Copyright
© 2011 ASCE.
History
Received: Jun 26, 2008
Accepted: Jun 1, 2010
Published online: Jun 3, 2010
Published in print: Feb 2011
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.