Abstract
Spreading of treatment reagent into a contaminated aquifer is a key factor for determining the efficacy of an in situ groundwater remediation method. Engineered injection and extraction (EIE) is a novel method of enhancing spreading in aquifers by inducing unsteady flow fields using sequential injection and extraction of freshwater around the treatment area. Chaotic advection in response to EIE stretches and folds the contaminant–reagent interface, thereby increasing the efficiency of remediation. Several numerical simulations investigating the effect of chaotic advection in response to EIE in porous media are available in literature but are limited to two-dimensional flow conditions. Considering the three-dimensional nature of real aquifer systems, an innovative addition to the existing two-dimensional models of EIE is introduced in this study. The three-dimensional perspective of EIE was established in this study by replacing fully screened wells in conventional EIE techniques with partially screened wells, thereby performing injection and extraction at a different vertical level. Three-dimensional numerical simulation of EIE in a confined aquifer was carried out using groundwater modeling software. The effect of heterogeneity and anisotropy on spreading in aquifers in the context of EIE also was examined. Results of simulation with variable active screen depth showed a considerable increase in spreading, which was quantified here in terms of area and volume of spread. Lyapunov exponents calculated from three-dimensional simulation results showed the presence of characteristic chaotic advection in three dimensions. Real field conditions such as heterogeneity and anisotropy were found to complement the spreading due to EIE in porous media. The insights obtained from this study can provide crucial guidance for the successful and effective application of EIE in the field.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code that support the findings of this study are available from the corresponding author upon reasonable request. The model in this study was developed using Visual MODFLOW Flex. The input data required to generate the model are available from the corresponding author upon reasonable request.
References
Aref, H. 1984. “Stirring by chaotic advection.” J. Fluid Mech. 4 (143): 1–21. https://doi.org/10.1017/S0022112084001233.
Bagtzoglou, A. C., and P. M. Oates. 2007. “Chaotic advection and enhanced groundwater remediation.” J. Mater. Civ. Eng. 19 (1): 75–83. https://doi.org/10.1061/(ASCE)0899-1561(2007)19:1(75).
Bakker, M., and K. Hemker. 2002. “A Dupuit formulation for flow in layered, anisotropic aquifers.” Adv. Water Resour. 25 (7): 747–754. https://doi.org/10.1016/S0309-1708(02)00074-X.
Bauer, R. D., M. Rolle, S. Bauer, C. Eberhardt, P. Grathwohl, O. Kolditz, R. U. Meckenstock, and C. Griebler. 2009. “Enhanced biodegradation by hydraulic heterogeneities in petroleum hydrocarbon plumes.” J. Contam. Hydrol. 105 (1–2): 56–68. https://doi.org/10.1016/j.jconhyd.2008.11.004.
Cho, M. S., F. Solano, N. R. Thomson, M. G. Trefry, D. R. Lester, and G. Metcalfe. 2019. “Field trials of chaotic advection to enhance reagent delivery.” Ground Water Monit. Rem. 39 (3): 23–39. https://doi.org/10.1111/gwmr.12339.
Dagan, G., and V. Nguyen. 1989. “A comparison of travel time and concentration approaches to modeling transport by groundwater.” J. Contam. Hydrol. 4 (1): 79–91. https://doi.org/10.1016/0169-7722(89)90027-2.
Freeze, R. A., and J. A. Cherry. 1979. Groundwater. Hoboken, NJ: Prentice Hall.
Greene, J. A., R. M. Neupauer, M. Ye, and J. R. Kasprzyk. 2017. “Engineered injection and extraction for remediation of uranium-contaminated groundwater.” In Proc., World Environmental and Water Resources Congress 2017, 111–117. Reston, VA: ASCE.
Harbaugh, A. W., E. R. Banta, M. C. Hill, and M. G. McDonald. 2000. MODFLOW-2000, the US Geological Survey modular groundwater model—User guide to modularization concepts and the ground-water flow process. Washington, DC: US Dept. of the Interior, USGS.
Hunt, A. G., T. E. Skinner, R. P. Ewing, and B. Ghanbarian-Alavijeh. 2011. “Dispersion of solutes in porous media.” Eur. Phys. J. B 80 (4): 411–432. https://doi.org/10.1140/epjb/e2011-10805-y.
Jones, S. W., and H. Aref. 1988. “Chaotic advection in pulsed source-sink systems.” Phys. Fluids 31 (3): 469–485. https://doi.org/10.1063/1.866828.
Kapoor, V., and P. K. Kitanidis. 1996. “Concentration fluctuations and dilution in two-dimensionally periodic heterogeneous porous media.” Transp. Porous Media 22 (1): 91–119. https://doi.org/10.1007/BF00974313.
Kitanidis, P. K. 1994. “The concept of the dilution index.” Water Resour. Res. 30 (7): 2011–2026. https://doi.org/10.1029/94WR00762.
Li, L., C. I. Steefel, K. H. Williams, M. J. Wilkins, and S. S. Hubbard. 2009. “Mineral transformation and biomass accumulation associated with uranium bioremediation at Rifle, Colorado.” Environ. Sci. Technol. 43 (14): 5429–5435. https://doi.org/10.1021/es900016v.
Mays, D. C., and R. M. Neupauer. 2010. “Engineered well injection and extraction to enhance mixing in aquifers.” In Proc., World Environmental and Water Resources Congress 2010: Challenges of Change, 715–722. Reston, VA: ASCE.
Mays, D. C., and R. M. Neupauer. 2012. “Plume spreading in groundwater by stretching and folding.” Water Resour. Res. 48 (7): 1–10. https://doi.org/10.1029/2011WR011567.
Muzzio, F., P. Swanson, and J. Ottino. 1992. “Mixing distributions produced by multiplicative stretching in chaotic flows.” Int. J. Bifurcation Chaos 2 (1): 37–50. https://doi.org/10.1142/S0218127492000057.
Neupauer, R. M., and D. C. Mays. 2015. “Engineered injection and extraction for in situ remediation of sorbing solutes in groundwater.” J. Environ. Eng. 141 (6): 04014095. https://doi.org/10.1061/(ASCE)EE.1943-7870.0000923.
Nissan, A., I. Dror, and B. Berkowitz. 2017. “Time-dependent velocity-field controls on anomalous chemical transport in porous media.” Water Resour. Res. 53: 3760–3769. https://doi.org/10.1002/2016WR020143.
Ottino, J. 1990. “Mixing, chaotic advection, and turbulence.” Annu. Rev. Fluid Mech. 22 (1): 207–254. https://doi.org/10.1146/annurev.fl.22.010190.001231.
Ottino, J. M. 1989. The kinematics of mixing. New York: Cambridge University Press.
Phillips, O. M. 1991. Flow and reactions in permeable rocks. Cambridge, UK: Cambridge University Press.
Piscopo, A. N., J. R. Kasprzyk, and R. M. Neupauer. 2015. “An iterative approach to multi-objective engineering design: Optimization of engineered injection and extraction for enhanced groundwater remediation.” Environ. Modell. Software 69 (Jul): 253–261. https://doi.org/10.1016/j.envsoft.2014.08.030.
Piscopo, A. N., R. M. Neupauer, and D. C. Mays. 2011. “Contrasting advective spreading and dispersive mixing.” In Proc., World Environmental and Water Resources Congress 2011: Bearing Knowledge for Sustainability. Reston, VA: ASCE.
Piscopo, A. N., R. M. Neupauer, and D. C. Mays. 2013. “Engineered injection and extraction to enhance reaction for improved in situ remediation.” Water Resour. Res. 49 (6): 3618–3625. https://doi.org/10.1002/wrcr.20209.
Pollock, D. W. 1994. User’s guide for MODPATH/MODPATH-PLOT, version 3: A particle tracking post-processing package for MODFLOW, the US Geological Survey finite-difference ground-water flow model. Washington, DC: US Dept. of the Interior, USGS.
Radabaugh, C. R., D. C. Mays, and R. M. Neupauer. 2009. “Groundwater mixing using pulsed dipole injection/extraction wells.” In Proc., World Environmental and Water Resources Congress 2009: Great Rivers. Reston, VA: ASCE.
Roth, E. J. 2018. “Experimental investigation of scalar spreading by engineered injection and extraction in porous media.” Civil Engineering graduate theses and dessertations, Dept. of Civil Engineering, Univ. of Colorado.
Sarkar, A., A. Narvaez, and J. Harting. 2012. “Quantification of the performance of chaotic micromixers on the basis of finite-time Lyapunov exponents.” Microfluid. Nanofluid. 13 (1): 19–27. https://doi.org/10.1007/s10404-012-0936-4.
Sposito, G. 2006. “Chaotic solute advection by unsteady groundwater flow.” Water Resour. Res. 42 (6): 1–6. https://doi.org/10.1029/2005WR004518.
Stremler, M. A., F. R. Haselton, and H. Aref. 2004. “Designing for chaos: Applications of chaotic advection at the microscale.” Philos. Trans. R. Soc. London, Ser. A 362 (1818): 1019–1036. https://doi.org/10.1098/rsta.2003.1360.
Swanson, P. D., and J. M. Ottino. 1990. “A comparative computational and experimental study of chaotic mixing of viscous fluids.” J. Fluid Mech. 213 (Apr): 227–249. https://doi.org/10.1017/S0022112090002300.
Tabor, M. 1989. Chaos and integrability in nonlinear dynamics. New York: Wiley.
Tel, T., G. Karolyi, A. Pentek, I. Scheuring, Z. Toroczkai, C. Grebogi, and J. Kadtke. 2000. “Chaotic advection, diffusion, and reactions in open flows.” Chaos 10 (1): 89–98. https://doi.org/10.1063/1.166478.
Todd, D. K., and L. W. Mays. 1989. Groundwater hydrology. New York: Wiley.
Trefry, M. G., D. R. Lester, G. Metcalfe, A. Ord, and K. Regenauer-Lieb. 2012. “Toward enhanced subsurface intervention methods using chaotic advection.” J. Contam. Hydrol. 127 (1–4): 15–29. https://doi.org/10.1016/j.jconhyd.2011.04.006.
Zhang, P., S. L. DeVries, A. Dathe, and A. C. Bagtzoglou. 2009. “Enhanced mixing and plume containment in porous media under time-dependent oscillatory flow.” Environ. Sci. Technol. 43 (16): 6283–6288. https://doi.org/10.1021/es900854r.
Information & Authors
Information
Published In
Journal of Hydrologic Engineering
Volume 26 • Issue 8 • August 2021
Copyright
© 2021 American Society of Civil Engineers.
History
Received: Jul 14, 2020
Accepted: Apr 22, 2021
Published online: Jun 9, 2021
Published in print: Aug 1, 2021
Discussion open until: Nov 9, 2021
ASCE Technical Topics:
- Advection
- Analysis (by type)
- Engineering fundamentals
- Field tests
- Flow (fluid dynamics)
- Fluid dynamics
- Fluid mechanics
- Groundwater
- Groundwater management
- Hydrologic engineering
- Models (by type)
- Numerical analysis
- Numerical models
- Tests (by type)
- Three-dimensional models
- Two-dimensional flow
- Two-dimensional models
- Water (by type)
- Water and water resources
- Water management
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Lauren J. Sather, Eric J. Roth, Roseanna M. Neupauer, John P. Crimaldi, David C. Mays, Experiments and Simulations on Plume Spreading by Engineered Injection and Extraction in Refractive Index Matched Porous Media, Water Resources Research, 10.1029/2022WR032943, 59, 2, (2023).