Transport and Retention of Water and Salt within Pervious Concrete Pavements Subjected to Freezing and Sand Application
Publication: Journal of Hydrologic Engineering
Volume 19, Issue 11
Abstract
Pervious concrete pavement can effectively reduce both the volume of water and the concentration of many sediment-associated contaminants in urban runoff. However, chloride from road salt is recognized as a threat to surface and groundwater resources because it is a conservative ion and does not readily bind to soil particles. To better understand and manage water resources in urban environments experiencing annual freeze-thaw cycles, this study examines the impact of road salt (sodium chloride) and sand applications on water and chloride movement in pervious concrete structures in a laboratory setting. Water movement and salt retention were characterized within pervious concrete slabs under frozen and thawed conditions. Laboratory experiments were repeated using both brine (23% salt solution) and fresh water as well as varying additions of sand (typical of winter sand application rates in Canada) to provide a range of temperatures experienced in cold-climate urban environments. Performance testing (via infiltration capacity) was conducted to assess the suitability of pervious concrete in climates where road sand and salt application is necessary. For all experimental conditions studied, chloride was rapidly transported through the pervious concrete. The complete freezing of pore water throughout the concrete slab reduced water and salt movement within the concrete matrix, while sand application reduced water movement through pores and delayed peak flow. The infiltration capacity of the pervious concrete structures, as tested, exceeds the probable maximum water loading rate that will be encountered in Southern Ontario, Canada, with or without sand, frozen or unfrozen. From a groundwater management and source water protection perspective, the data indicate that pervious concrete pavement structures may contribute to chloride contamination of groundwater if used in salt vulnerable areas and groundwater recharge zones.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors would like to thank Ontario Ministry of Environment, the Region of Waterloo, the Cement Association of Canada, the Natural Science and Engineering Research Council of Canada, and the Salt Institute for funding this project. The assistance in the lab and helpful comments from Vimy Henderson and Nicole Ronholm are appreciated. Also, comments from several reviewers helped to strengthen this manuscript.
References
Andrey, J., Mills, B., and Vandermolen, J. (2001). Weather information and road safety, Institute for Catastrophic Loss Reduction, Toronto, Canada.
Balades, J. D., Legret, M., and Madiec, H. (1995). “Permeable pavements: Pollution management tools.” Water Sci. Technol., 32(1), 49–56.
Canadian Council of Ministers of Environment (CCME). (2011). Canadian water quality guidelines for the protection of aquatic life: Chloride. In: Canadian environmental quality guidelines, CCME, ed., Environment Canada, Gatineau.
Canadian Standards Association (CSA). (1984). CSA A23.2-3C: Making and curing concrete test compression and flexural specimens, Toronto, ON, Canada.
Drotz, H. S., Tilston, E. L., Sparrman, T., Schleucher, J., Nilsson, M., and Öquist, M. G. (2009). “Contributions of matric and osmotic potentials to the unfrozen water content of frozen soils.” Geoderma, 148(3), 392–398.
Freeze, R. A., and Cherry, J. A. (1977). Groundwater, Prentice-Hall, Englewood Cliffs, NJ.
Haselbach, L., and Freeman, R. (2006). “Vertical porosity distributions in pervious concrete pavement.” ACI Mater. J., 103(6), 452–458.
Henderson, V. (2012). “Evaluation of the performance of pervious concrete pavement in the Canadian climate.” Ph.D. thesis, Univ. of Waterloo, Waterloo, ON, Canada.
Henderson, V., and Tighe, S. L. (2011). “Evaluation of pervious concrete pavement permeability renewal maintenance methods at field sites in Canada.” Can. J. Civ. Eng., 38(12), 1404–1413.
Houle, K. M. (2008). “Winter performance assessment of permeable pavements.” M.Sc. thesis, Univ. of New Hampshire, Durham, NH.
Janoo, V., Korhonen, C., and Hovan, M. (1999). “Measurement of water content in Portland cement concrete.” J. Transp. Eng., 245–249.
Kresin, C., James, W., and Elrick, D. (1997). “Observations of infiltration through clogged porous concrete block pavers.” Advances in Modeling of Stormwater Impacts, 5, 191–205.
Kwiatkowski, M., Welker, A. L., Traver, R. G., Vanacore, M., and Ladd, T. (2007). “Evaluation of an infiltration best management practice utilizing pervious concrete 1.” J. Am. Water Resour. Assoc., 43(5), 1208–1222.
Malicki, M. A., Plagge, R., and Roth, C. H. (1996). “Improving the calibration of dielectric TDR soil moisture determination taking into account the solid soil.” Eur. J. Soil Sci., 47(3), 357–366.
Marsalek, J. (2003). “Road salts in urban stormwater: An emerging issue in stormwater management in cold climates.” Water Sci. Technol., 48(9), 61–70.
Marsalek, J., and Schreier, H. (2009). “Innovation in stormwater management in Canada: The way forward.” Water Qual. Res. J. Can., 44(1), 5–10.
McCuen, R., and Moglen, G. (1988). “Multicriterion stormwater management methods.” J. Water Resour. Plann. Manage., 414–431.
Ministry of the Environment. (2003). Stormwater management planning and design manual, Queen’s Printer for Ontario, Toronto, Canada.
Ontario Provincial Standard Specification (OPSS). (2012). “Material specification for aggregates—Miscellaneous.”.
Or, D., Jones, S. B., VanSharr, J. R., Humphries, S., and Koberstein, L. (2004). “WinTDR soil software analysis user’s guide.” WinTDR version 6.1.
Patterson, D. E., and Smith, M. W. (1980). “The measurement of unfrozen water content by time domain reflectometry: Results from laboratory tests.” Can. Geotech. J., 18(1), 131–144.
Paul, M. J., and Meyer, J. L. (2001). “Streams in the urban landscape.” Annu. Rev. Ecol. Evol. Syst., 32(1), 333–365.
Penner, E., and Crawford, C. B. (1983). “Frost action and foundations.”, National Research Council of Canada.
Schueler, T. (1994). “The importance of imperviousness.” Watershed Prot. Tech., 1(3), 100–111.
Schueler, T. (2000). “Impact of suspended and deposited sediment.” Watershed Prot. Tech., 2(3), 443–444.
Shao, J., Lister, P. J., and McDonald, A. (1994). “A surface-temperature prediction model for porous asphalt pavement and its validation.” Meteorol. Appl., 1(2), 129–134.
Stone, M., and Marsalek, J. (2011). “Adoption of best practices for the environmental management of road salt in Ontario.” Water Qual. Res. J. Can., 46(2), 174–182.
Sun, Z. J., Young, G. D., McFarlane, R. A., and Chambers, B. M. (2000). “The effect of soil electrical conductivity on moisture determination using time-domain reflectometry in sandy soil.” Can. J. Soil Sci., 80, 13–22.
Tennis, P., Leming, M., and Akers, D. (2004). Pervious concrete pavements, National Ready Mixed Concrete Association, Silver Spring, MD.
Topp, G. C., Davis, J. L., and Annan, A. P. (1980). “Electromagnetic determination of soil water content: Measurements in coaxial transmission lines.” Water Resour. Res., 16(3), 574–582.
Toronto and Region Conservation Authority. (2008). Performance evaluation of permeable pavement and a bioretention swale: Senica College, King City, Ontario, S. T. E. Program, ed., TRCA, Toronto, Canada.
van Duin, B., Brown, C., Chu, C., Marsalek, J., and Valeo, C. (2008). “Characterization of long-term solids removal and clogging processes in two types of permeable pavement under cold climate conditions.” 11th Int. Conf. on Urban Drainage, The International Water Association, London, England.
Wang, L., Lyons, J., Kanehl, P., and Bannerman, R. (2001). “Impacts of urbanization on stream habitat and fish across multiple spatial scales.” Environ. Manage., 28(2), 255–266.
Wyseure, G. C. L., Mojid, M. A., and Malik, M. A. (1997). “Measurement of volumetric water content by TDR in saline soils.” Eur. J. Soil Sci., 48, 347–354.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Nov 26, 2013
Accepted: May 30, 2014
Published online: Jul 9, 2014
Published in print: Nov 1, 2014
Discussion open until: Dec 9, 2014
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.