Model for Designing Infiltration Basins in Tropical and Subtropical Climates with a Focus on Unpaved Roads
Publication: Journal of Hydrologic Engineering
Volume 19, Issue 9
Abstract
Controlling runoff from impervious surfaces such as roadways is an important part of storm water management in both urban and rural societies. Infiltration basins are one type of structure used to control storm water runoff. Design of these structures often involves using a single design storm and the assumption that the basin is initially dry. However, in tropical and subtropical climates where rainfall occurs frequently, the assumption of a dry basin is invalid. The objective of this study was to develop a new infiltration basin model that includes the effects of closely spaced storms on basin size. The model was used to design an infiltration basin for a section of unpaved road in João Pinheiro, Minas Gerais, Brazil. The performance of the model was evaluated with respect to infiltration rate, storm return period, and basin dimension parameters. Results showed that the infiltration rate was the most important input variable affecting basin size and that small but closely spaced storm events more strongly influenced basin size than isolated large events. Thus, while infiltration basins are often sized to capture small storm events (e.g., 25 mm or 90th percentile) to capture the most pollutants, this model indicates that such a sizing guideline may be inadequate if the basin is not empty. For unpaved roads, it is recommended that basins have an infiltration rate to balance hydrologic performance and size.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors would like to thank Conselho Nacional de Desenvolvimento Científico e tecnológico–CNPq (Brazil), and Fundação de Amparo à Pesquisa do Estado de Minas Gerais–FAPEMIG (Minas Gerais state, Brazil), for providing necessary funds to conduct this work.
References
Akan, A. O. (2002). “Modified rational method for sizing infiltration structures.” Can. J. Civ. Eng., 29(4), 539–542.
Alberti, M., et al. (2007). “The impact of urban patterns on aquatic ecosystems: An empirical analysis in Puget lowland sub-basins.” Landscape Urban Plan., 80, 345–361.
Baena, L. G. N., Pruski, F. F., Moreira, M. C., Souza, V. B. C., Zanetti, S. S., and Oliveira, V. P. S. (2005). “Software for generating synthetic series of climatic data.” Revista Engenharia na Agricultura, 13(3), 210–220 (in Portuguese).
Braga, A., Horst, M., and Traver, R. G. (2007). “Temperature effects on the infiltration rate through an infiltration basin BMP.” J. Irrig. Drain. Eng., 593–601.
Cannavo, P., Vidal-Beaudet, L., Béchet, B., Lassabatère, L., and Charpentier, S. (2010). “Spatial distribution of sediments and transfer properties in soils in a stormwater infiltration basin.” J. Soil Sediments, 10(8), 1499–1509.
Datry, T., Malard, F., Vitry, L., Hervant, F., and Gibert, J. (2003). “Solute dynamics in the bed sediments of a stormwater infiltration basin.” J. Hydrol., 273(1–4), 217–233.
Davis, A. P., Traver, R. G., Hunt, W. F., Lee, R., Brown, R. A., and Olszewski, J. M. (2012). “Hydrologic performance of bioretention storm-water control measures.” J. Hydrol. Eng., 604–614.
Dechesne, M., Barraud, S., and Bardin, J. P. (2004). “Indicators for hydraulic and pollution retention assessment of stormwater infiltration basins.” J. Environ. Manage., 71(4), 371–380.
Hong, Y. M. (2008). “Graphical estimation of detention pond volume for rainfall of short duration.” J. Hydro-Environ. Res., 2(2), 109–117.
Iowa Department of Natural Resources (IDNR). (2009). Stormwater management manual, 〈http://www.iowadnr.gov/Environment/WaterQuality/WatershedImprovement/WatershedBasics/Stormwater/StormwaterManual.aspx〉.
Jones, J. A., and Grant, G. E. (1996). “Peak flow responses to clear-cutting and roads in small and large basins, western Cascades, Oregon.” Water Resour. Res., 32(4), 959–974.
Jones, J. A., Swanson, F. J., Wemple, B. C., and Snyder, K. U. (2000). “Effect of roads on hydrology, geomorphology, and disturbance patches in stream networks.” Conserv. Biol., 14(1), 76–85.
Jungerius, P. D., Matundura, J., and van de Ancker, J. A. M. (2002). “Road construction and gully erosion in west Pokot, Kenya.” Earth Surf. Processes Landforms, 27(11), 1237–1247.
Kite, G. W. (1988). Frequency and risk analyses in hydrology, 5th Ed., Water Resources Publications, Highlands Ranch, CO.
Lassabatere, L., et al. (2010). “Effect of the settlement of sediments on water infiltration into two urban infiltration basins.” Geoderma, 156(3–4), 316–325.
Lexington-Fayette Urban County Government (LFUCG). (2009). Stormwater manual, 〈http://www.lexingtonky.gov/index.aspx?page=780〉.
Ma, L., and Spalding, R. F. (1997). “Effects of artificial recharge on ground water quality and aquifer storage recovery.” J. Am. Water Resour. Assoc., 33(3), 561–572.
Maryland Department of the Environment (MDE). (2009). Stormwater management manual, 〈http://www.mde.state.md.us/programs/Water/StormwaterManagementProgram/MarylandStormwaterDesignManual/Pages/Programs/WaterPrograms/SedimentandStormwater/stormwater_design/index.aspx〉.
National Research Council (NRC). (2009). Urban storm water management in the United States, National Academies Press, Washington, DC.
National Water Agency (ANA). (2014). “Hidroweb—Pluviometric station 01745007.” 〈http://hidroweb.ana.gov.br/Estacao.asp?Codigo=1745007〉 (in Portuguese).
Nearing, M. A., Deer-Ascough, L., and Laflen, J. M. (1990). “Sensitivity analysis of the WEPP hillslope profile erosion model.” Trans. ASAE, 33(3), 839–849.
Nicks, A. D., Lane, L. J., and Gander, G. A. (1995). “Weather generator, USDA water erosion prediction project: Technical documentation.” Chapter 2. National Soil Erosion Research Laboratory, USDA, Agricultural Research Service, West Lafayette, IN.
Nyssen, J., et al. (2002). “Impact of road building on gully erosion risk: A case study from the northern Ethiopian highlands.” Earth Surf. Processes Landforms, 27(12), 1267–1283.
Oliveira, V. P. S., Zanetti, S. S., and Pruski, F. F. (2005a). “CLIMABR part I: Model for generation of synthetic series of precipitation.” Revista Brasileira de Engenharia Agrícola e Ambiental, 9(3), 349–355 (in Portuguese).
Oliveira, V. P. S., Zanetti, S. S., and Pruski, F. F. (2005b). “CLIMABR part II: Generation of precipitation profile.” Revista Brasileira de Engenharia Agrícola e Ambiental, 9(3), 356–363 (in Portuguese).
Pruski, F. F., Ferreira, P. A., Ramos, M. M., and Cecon, P. R. (1997). “Model to design level terraces.” J. Irrig. Drain. Eng., 8–12.
Water Environment Federation (WEF), ASCE, and Water Resources Institute (WRI). (2012). “Design of urban stormwater controls.”, McGraw-Hill, New York.
Wemple, B., Jones, J. A., and Grant, G. E. (1996). “Channel network extension by logging roads in two basins, western Cascades, Oregon.” Water Resour. Bull., 32(6), 1195–1207.
Zanetti, S. S., Pruski, F. F., Moreira, M. C., Sediyama, G. C., and Silva, D. D. (2005). “Software for generation of synthetic series of precipitation.” Engenharia Agrícola, 25(1), 96–104.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Jul 2, 2013
Accepted: Mar 12, 2014
Published online: Mar 14, 2014
Published in print: Sep 1, 2014
Discussion open until: Nov 18, 2014
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.