Assessment of the Melt Rate Function in a Temperature Index Snow Model Using Observed Data
Publication: Journal of Hydrologic Engineering
Volume 19, Issue 7
Abstract
Temperature index snowmelt models often require representation of a snowpack’s melt rate. Defining the melt rate as a function of an accumulated number of warming degree-days is achieved in some temperature index models through the antecedent temperature index–melt rate (ATIMR) function, and provides a reasonable method for adjusting the melt rate during the season. Modelers have typically relied on a default ATIMR function developed two decades ago. However, literature concerning the nature of this default function and how it was developed is largely nonexistent. This paper presents results of a comparison between the default ATIMR function and ATIMR functions computed from field data from two headwater stations within the American River watershed upstream of Folsom Lake, California. An error analysis was also performed using the site-specific data. Using the Hydrologic Engineering Center’s hydrologic modeling system (HEC-HMS), it was found that modeled results often varied dramatically between the default curve and the computed curves. In one case, modeled results showed significant improvement between the default method and that of the data-derived approach. This finding suggests that conventional use of the default 1991 curve, often employed in practice irrespective of season and/or location, should at the very least be reconsidered.
Get full access to this article
View all available purchase options and get full access to this article.
References
Anderson, E. (2006). “Snow accumulation and ablation model – SNOW-17.” National Weather Service (NWS), Silver Spring, MD.
Bombardelli, F. A., and García, M. H. (2003). “Hydraulic design of large-diameter pipes.” J. Hydraul. Eng., 839–846.
California Dept. of Water Resources. (2010). California data exchange center, 〈cdec.water.ca.gov〉 (May 8, 2011).
Chung, E. G., Bombardelli, F. A., and Schladow, G. S. (2009). “Modeling linkages between sediment resuspension and water quality in a shallow, eutrophic, wind-exposed lake.” Ecol. Modell., 220(9–10), 1251–1265.
DeWalle, D. R., and Rango, A. (2008). Principles of snow hydrology, Cambridge University Press, Cambridge, U.K.
Fazel, K. (2011). “Data-driven snowmelt modeling with a temperature index method.” M.S. thesis, Univ. of California, Davis, Davis, CA.
Hydrologic Engineering Center (HEC). (2014). “HEC-HMS.” 〈www.hec.usace.army.mil/software/hec-hms/〉 (May 8, 2011).
National Climatic Data Center (NCDC). (1996). METAR, 〈www.ncdc.noaa.gov/wdc/metar/〉 (May 8, 2011).
Scharffenberg, W. A., Ely, P., Daly, S. F., Fleming, M. J., and Pak, J. (2010). “Hydrologic modeling system (HEC-HMS): Physically-based simulation components.” 2nd Joint Federal Interagency Conf., U.S. Dept. of the Interior, Advisory Committee on Water Information, Subcommittee on Sedimentation.
U.S. Army Corps of Engineers. (1991). “SSARR model streamflow synthesis and reservoir regulation.” User manual, North Pacific Division, Portland, OR, D-15–D-17.
Whiteman, D. C. (2000). Mountain meteorology fundamentals and applications, Oxford University Press, New York.
Information & Authors
Information
Published In
Copyright
© 2013 American Society of Civil Engineers.
History
Received: Aug 23, 2012
Accepted: Oct 22, 2013
Published online: Oct 24, 2013
Discussion open until: Mar 24, 2014
Published in print: Jul 1, 2014
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.