Coupled Simulation of Xinanjiang Model with MODFLOW
Publication: Journal of Hydrologic Engineering
Volume 18, Issue 11
Abstract
This paper investigates the probability of integrating the Xinanjiang model, the most widely used watershed hydrological model in China, with the fully distributed groundwater model MODFLOW for processing a coupled flow simulation. Based on the flow simulation of the Xinanjiang and the SWAT model in the case study area, the correlation between the groundwater recharge and the total flow runoff is analyzed, which is then applied to compute the groundwater recharge in subbasins in the Xinanjiang model. By applying a loosely coupled modeling approach, the spatially distributed groundwater recharge is introduced into MODFLOW with the RCH package via the interface of the subbasins in the Xinanjiang model and the cells in MODFLOW; thus the integration of the two models is successfully realized. The application of the integrated model simulation in Zhangji, a groundwater-dominated area in the Huai River basin, China, demonstrates that the coupled Xinanjiang-MODFLOW simulation produces reasonable groundwater levels comparing to the observations. However the study also shows the need for further research in regarding to the improvement on Xinanjiang model in order to enable its direct integration with MODFLOW. Furthermore, the approach presented in this paper is limited to a unidirectional coupling of Xinanjiang and MODFLOW, which only accounts for groundwater level simulations, while the possible feedbacks from the surface water is neglected. More efforts are required to further facilitate the applicability and capability of the models integration.
Get full access to this article
View all available purchase options and get full access to this article.
References
Arnold, J. G., Allen, P. M., and Bernhardt, G. (1993). “A comprehensive surface-groundwater flow model.” J. Hydrol., 142(1–4), 47–69.
Arnold, J. G., and Fohrer, N. (2005). “SWAT2000: Current capabilities and research opportunities in applied watershed modeling.” J. Hydrol. Proc., 19(3), 563–572.
Arnold, J. G., Srinivasan, R., Muttiah, R. S., and Williams, J. R. (1998). “Large area hydrologic modeling and assessment: Part I. Model development.” J. Am. Water Resour. Assoc., 34(1), 73–89.
Chung, I., Kim, N., Lee, J., and Sophocleous, M. (2010). “Assessing distributed groundwater recharge rate using integrated surface water-groundwater modelling: application to Mihocheon watershed, South Korea.” J. Hydrol., 18(5), 1253–1264.
Hao, Z. C. (1992). “Study on the application of coupled surface water and groundwater models in water resources assessment.” J. Hydrogeol. Eng. Geol., 19(6), 18–22.
Hapurarachchi, H. A. P., and Li, Z. J. (2003). “Application of models with different types of modelling methodologies for river flow forecasting.” Proc., of Symp. Weather Radar Information and Distributed Hydrological Modelling, Vol. 282, IAHS Publications, 218–226.
Hapurarachchi, H. A. P., Li, Z. J., and Wang, S. H. (2001). “Application of SCE-UA method for calibrating the Xinanjiang watershed model.” J. Lake Sci., 12(4), 304–314.
Jin, X., and Sridhar, V. (2010). “An integrated surface water-groundwater modeling in the Upper Snake River Basin, Idaho.” Proc, American Geophysical Union Meeting, San Francisco, CA.
Kim, N. W., Chung, Il. M., Won, Y. S., and Arnold, J. G. (2008). “Development and application of the integrated SWAT–MODFLOW model.” J. Hydrol., 356(1–2), 1–16.
Ling, M. H., Chen, X., Chen, Q. P., Wei, L. N., and Zhang, Z. C. (2010). “Advances in coupled surface water and groundwater models.” J. Adv. Sci. Technol. Water Resour., 30(4), 79–84.
Lu, M. J., and Li., X. (2012). “Multi-step optimization scheme for Xinanjiang model Parameters based on their time scale dependent sensitivities.”, Geophysical Research Abstract, Vol. 14, Copernicus, Göttingen, Germany.
McDonald, M. G., and Harbaugh, A. W. (1984). “A modular three-dimensional finite-difference groundwater flow model.” Book 6, Chapter A1, Techniques of water-resources investigations, U.S. Geological Survey, Washington, DC.
Nash, J. E., and Sutcliffe, J. V. (1970). “River flow forecasting through conceptual models.” J. Hydrol., 10(3), 282–290.
Panday, S., and Huyakorn, P. S. (2004). “A fully coupled physically-based spatially-distributed model for evaluating surface/subsurface flow.” J. Adv. Water Resour., 27(4), 361–382.
Refsgaard, J. C., and Storm, B. (1995). MIKE SHE computer models of watershed hydrology, V. P. Singh, ed., Water Resources Publications, Littleton, CO, 809–846.
Regan, S., Markstron, S. L., Niswonger, R. G., Prudic, D. E., and Barlow, P. M. (2008). “GSFLOW-coupled ground water and surface-water flow model based on the integration of the precipitation-runoff modeling system (PRMS) and the modular ground-water flow model (MODFLOW-2005).” Chapter 1, Section D, Ground water/surface water book 6, modeling techniques, U.S. Geological Survey, Washington, DC.
Ross, M., Geurink, J., Aly, A., Tara, P., Trout, K., and Jobes, T. (2004). “Integrated hydrologic model (IHM).” Volume 1: Theory manual, Water Resource Group, Dept. of Civil and Environmental Engineering, Univ. of South Florida, Tampa, FL.
Ross, M., Geurink, J., and Said, A. (2005). “Evapotranspiration conceptualization in the HSPF-Modflow integrated models.” J. Am. Water Resour. Assoc., 41(5), 1013–1025.
Sophocleous, M. A., Koelliker, J. K., Govindaraju, R. S., Birdie, T., Ramireddygari, S. R., and Perkins, S. P. (1999). “Integrated numerical modeling for basin wide water management: The case of the Rattlesnake Creek basin in south central Kansas.” J. Hydrol., 214(1–4), 179–196.
Sophocleous, M. S., Perkins, S. P., Stadnyk, N. G., and Kaushal, R. S. (1997). “Lower Republican Stream–Aquifer Project, final report.”, Univ. of Kansas, Lawrence, KS.
Swain, E. D. (1994). “Implementation and use of direct-flow connections in a coupled groundwater and surface-water model.” J. Groundwater, 32(1), 139-144.
Wang, R., Wang, Z. G., and Xia, J. (2008). “Advances in coupled surface water and groundwater models.” J. Prog. Geograph., 27(4), 38–41.
Yeh, G. T., Huang, G. B., Cheng, H. P., Zhang, F., Lin, H. C., Edris, E., and Richands, D. (2005). “A numerical model of flow, heat transfer, and salinity, sediment, and water quality transport in watershed systems of 1-D stream-river network, 2-D overland regime, and 3-D subsurface media.” U.S. Environmental Protection Agency, Washington, DC.
Yu, Z., and Schwartz, F. W. (1998). “Application of integrated basin-scale hydrologic model to simulate surface water and groundwater interactions in Big Darby Creek watershed, Ohio.” J. Am. Water Resour. Assoc., 34(2), 409–425.
Zhao, R. J. (1992). “The Xinanjing model applied in China.” J. Hydrol., 135(1–4), 371–381.
Zhao, R. J., Zhuang, Y. L., Liu, X. R., and Zhang, Q. S. (1980). “The Xinanjiang model.” Proc., Hydrological Forecasting Proceedings Oxford Symp., IAHS 129, International Association of Hydrological Sciences, Wallingford, U.K., 351–356.
Information & Authors
Information
Published In
Copyright
© 2013 American Society of Civil Engineers.
History
Received: Jun 8, 2010
Accepted: Aug 8, 2012
Published online: Aug 20, 2012
Discussion open until: Jan 20, 2013
Published in print: Nov 1, 2013
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.