Large-Scale Pile Load Tests in Mixed Sand and Soft Clay Ground: Impact of Aging and Stops in Driving
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 149, Issue 1
Abstract
A series of axial load tests in tension has been carried out on open-ended driven steel pipe piles with a diameter of 406 mm and lengths of 70 and 40 m. At the test site, the ground consists of layers of loose fluvial sand and soft silty marine clay deposits. One test pile was well instrumented with strain gauges. The main scope of the test program was to verify design methods including time effects for pile foundations for new bridges at the site. To verify time or aging effects, the piles were load tested 3, 9, and 18 months after installation. The test results are presented in some detail and compared to bearing capacity and load-displacement response predicted prior to pile installation. An unexpected result of the test program was that several days of stops in driving due to welding of the pile segments and connecting of the instrumentation had a major negative impact on the ultimate bearing capacity of the instrumented pile, which failed at about 50% of the predicted values. Noninstrumented test piles with shorter stops due to welding of segments gave bearing capacities in reasonable agreement with predicted values.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models and code that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
The authors would like to thank Bane NOR, a state-owned company responsible for the national railway infrastructure of Norway for their positive support and financing of the pile tests presented herein, and for allowing the results to be published. Special thanks also go to Axel Walta, Ivar-Kristian Waarum, and Rasmus Tofte Klinkvort from NGI who helped out with the design of load testing arrangements, instrumentation, data collection, and data inversion. Finally, the authors are grateful to Zhongqiang Liu and Farrokh Nadim who helped out with calculations using the ICP and UWA methods.
References
API (American Petroleum Institute). 1993. Recommended practice for planning, designing and constructing fixed offshore platforms-load and resistance factor design. API RP 2A-LRFD. Washington, DC: API.
Axelsson, G. 2000. “Long-term set-up of driven piles in sand.” Ph.D. thesis, Institutionen för anläggning och miljö, KungligaTekniskaHögskolan, Stockholm.
Berre, T., T. Lunne, and J.-S. L’Heureux. 2022. “Quantification of sample disturbance for soft, lightly overconsolidated, sensitive clay samples.” Can. Geotech. J. 59 (2): 300–303. https://doi.org/10.1139/cgj-2020-0551.
Bjerrum, L. 1973. “Problems of soil mechanics and construction on soft clays, state of the art report, session 4.” In Proc., 8th ICSMFE, 109–159. Rotterdam, Netherlands: A.A. Balkema Publishers.
Bullock, P. J., J. H. Schmertmann, M. C. McVay, and F. C. Townsend. 2005. “Side shear setup. I: Test piles driven in Florida.” J. Geotech. Geoenviron. Eng. 131 (3): 292–300. https://doi.org/10.1061/(ASCE)1090-0241(2005)131:3(292).
Carroll, R., P. Carotenuto, C. Dano, I. Salama, M. Silva, S. Rimoy, K. Gavin, and R. Jardine. 2020. “Field experiments at three sites to investigate the effects of age on steel piles driven in sand.” Géotechnique 70 (6): 469–489. https://doi.org/10.1680/jgeot.17.P.185.
Chow, F., R. Jardine, F. Brucy, and J. Nauroy. 1998. “Effects of time on capacity of pipe piles in dense marine sand.” J. Geotech. Geoenviron. Eng. 124 (3): 254–264. https://doi.org/10.1061/(ASCE)1090-0241(1998)124:3(254).
Clausen, C., P. Aas, and K. Karlsrud. 2005. “Bearing capacity of driven piles in sand, the NGI approach.” In Proc., 1st Int. Symp. Frontiers in Offshore Geotechnics (ISFOG). London: Taylor & Francis.
Doherty, P., and K. Gavin. 2011. “The shaft capacity of displacement piles in clay: A state of the art review.” Geotech. Geol. Eng. 29 (4): 389–410. https://doi.org/10.1007/s10706-010-9389-2.
Doherty, P., and K. Gavin. 2013. “Pile aging in cohesive soils.” J. Geotech. Geoenviron. Eng. 139 (9): 1620–1624. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000884.
Gavin, K., R. Jardine, K. Karlsrud, and B. Lehane. 2015. “The effects of pile ageing on the shaft capacity of offshore piles in sand.” In Proc., Int. Symp. Frontiers in Offshore Geotechnics (ISFOG). London: Taylor & Francis.
Jardine, R., F. Chow, R. Overy, and J. Standing. 2005. ICP design methods for driven piles in sands and clays. London: Thomas Telford.
Jardine, R. J., J. R. Standing, and F. C. Chow. 2006. “Some observations of the effects of time on the capacity of piles driven in sand.” Géotechnique 56 (4): 227–244. https://doi.org/10.1680/geot.2006.56.4.227.
Karlsrud, K. 2012. “Prediction of load-displacement behaviour and capacity of axially loaded piles in clay based on analyses and interpretation of pile load test results.” Ph.D. thesis, Fakultet for ingeniørvitenskap og teknologi, Institutt for bygg, anlegg og transport, Norwegian Univ. of Science and Technology.
Karlsrud, K. 2014. “Ultimate shaft friction and load-displacement response of axially loaded piles in clay based on instrumented pile tests.” J. Geotech. Geoenviron. Eng. 140 (12): 04014074. https://doi.org/10.1061/(ASCE)GT.1943-5606.0001170.
Karlsrud, K., and T. Haugen. 1985. “Axial static capacity of steel model piles in overconsolidated clay.” In Proc., Int. Conf. on Soil Mechanics and Foundation Engineering, 1401–1406. Rotterdam, Netherlands: A.A. Balkema Publishers.
Karlsrud, K., and F. G. Hernandez-Martinez. 2013. “Strength and deformation properties of Norwegian clays from laboratory tests on high-quality block samples.” Can. Geotech. J. 50 (12): 1273–1293. https://doi.org/10.1139/cgj-2013-0298.
Karlsrud, K., T. G. Jensen, E. Lied, F. Nowacki, and A. Simonsen. 2014. “Significant ageing effects for axially loaded piles in sand and clay verified by new field load tests.” In Vol. 2 of Proc., Offshore Technology Conf. OTC OTC-25197-MS. Houston, TX: OnePetro.
Karlsrud, K., T. Lunne, D. Kort, and S. Strandvik. 2005 “Cptu correlations for clays.” In Proc., 16th Int. Conf. on Soil Mechanics and Geotechnical Engineering, 693–702. Amsterdam, Netherlands: IOS Press.
Karlsrud, K., F. Nadim, and T. Haugen. 1986. “Piles in clay under cyclic axial loading—Field tests and computational modelling.” In Proc., 3rd Int. Conf. on Numerical Methods in Offshore Piling, 165–190. Paris: Editions Technip.
Ladd, C. C., and R. Foott. 1974. “New design procedure for stability of soft clays.” J. Geotech. Eng. Div. 100 (7): 763–786. https://doi.org/10.1061/AJGEB6.0000066.
Lambe, T. W. 1973. “Predictions in soil engineering.” Géotechnique 23 (2): 151–202. https://doi.org/10.1680/geot.1973.23.2.151.
Lehane, B. M., Y. Li, and R. Williams. 2013. “Shaft capacity of displacement piles in clay using the cone penetration test.” J. Geotech. Geoenviron. Eng. 139 (2): 253–266. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000749.
Lehane, B. M., J. A. Schneider, and X. Xu. 2005. A review of design methods for offshore driven piles in siliceous sand. Crawley, WA: Univ. of Western Australia.
Lim, J. K., and B. M. Lehane. 2014. “Characterisation of the effects of time on the shaft friction of displacement piles in sand.” Géotechnique 64 (6): 476–485. https://doi.org/10.1680/geot.13.P.220.
Lunne, T., T. Berre, K. H. Andersen, S. Strandvik, and M. Sjursen. 2006. “Effects of sample disturbance and consolidation procedures on measured shear strength of soft marine Norwegian clays.” Can. Geotech. J. 43 (7): 726–750. https://doi.org/10.1139/t06-040.
NGF (Norwegian Geotechnical Society). 2019. Peleveiledningen (pile design guidelines). Oslo, Norway: NGF.
Rimoy, S., M. Silva, R. Jardine, Z. X. Yang, B. Zhu, and C. Tsuha. 2015. “Field and model investigations into the influence of age on axial capacity of displacement piles in silica sands.” Géotechnique 65 (7): 576–589. https://doi.org/10.1680/geot.14.P.112.
Saye, S., B. Kumm, and A. W. Stuedlein. 2020. “Use of case histories to illustrate the effect of installation activities on the side resistance of pipe piles in plastic soils.” J. Deep Found. Inst. 14 (2): 1–20. https://doi.org/10.37308/DFIJnl.20200121.213.
Trimble. 2020. “Novapoint GeoSuite toolbox 2020.” Accessed October 26, 2021. https://construction.trimble.com/en/.
Information & Authors
Information
Published In
Copyright
© 2022 American Society of Civil Engineers.
History
Received: Dec 10, 2021
Accepted: Aug 26, 2022
Published online: Nov 7, 2022
Published in print: Jan 1, 2023
Discussion open until: Apr 7, 2023
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.